Reliance Foundry’s signature bollard covers play a role in maintaining retro-classic design outside Oriole Park raffic and crowd control devices often detract from architecture. This was the challenge presented to the architects that were tasked with designing upgrades to the walkway, known as Eutaw Street, outside Major League Baseball’s first retro-classic ballpark in the fall of 2012. Oriole Park was celebrating its 20th anniversary and showcasing the historically-styled architecture that had made it a fan favourite. The challenge came in the form of unadorned, steel bollards that increased safety on the walkway yet contrasted with the retro-classic design. Opened in 1992, Oriole Park at Camden yards is known as the ballpark that forever changed baseball. At a time when most parks were being designed in an all-encompassing oval shape to host multiple events and functions, Oriole Park was designed with only baseball in mind. It was constructed in an asymmetrical, old fashioned form that catered solely to baseball. Its architecture brings back memories of baseball’s early days and this made preserving architectural form on Eutaw Street a top priority. Modern bollards composed of cement and steel would help to protect fans converging on the stadium but they would clash with the ball park’s traditional ambience. The architects tasked with designing the upgrades to Eutaw Street chose Reliance Foundry’s model R-7539 bollard to add ornamentation to the unattractive cement and steel posts. The signature bollard in Reliance Foundry’s catalogue, the model R-7539 is composed of ductile iron and brings a time-honored feel to streetscapes. It features a fluted base with a ball-shaped cap that compliments traditional architecture. The architects contracted the Baltimore-based, Waverly Construction and Management Company to perform the install. Waverly employed a variation on Reliance Foundry’s standard security mounting method to perform the installation. In the standard installation method, the bollard is secured over the security post by drilling a 3⅜” hole into the post's cement interior and inserting a threaded rod. The Waverly Construction Company slightly altered the standard mounting method by using their own custom-built, stainless steel threaded rods. After the threaded rods were secured, the bollards were set over the posts and threaded rods and fastened with washers and nuts. The caps were then connected to the shafts with set screws to create seamless, architectural highlights on the retro classic streetscape. The bollards were installed in the fall of 2012 and, so far, they have stood up well. “Our clients are happy; the bollard covers did their job” reports Ed Burnich, Project Manager at Waverly Construction. “Reliance Foundry met their promised delivery time and we’re happy.” Reliance Foundry’s ductile iron bollards can be installed over both new and existing security posts or in standalone, decorative applications. Reliance bollards have been installed at many prominent locations across North America to integrate traffic and crowd control with historic architectural design. They are available in a wide array of styles, ranging from classic to contemporary and they offer an exceptionally long service life. Interested in viewing Reliance Foundry’s line of retro-classic, steel bollard and bumper post enhancements? Reliance Foundry would like to thank the Baltimore Orioles and Waverly Construction for their business and their support in producing this blog posting.

Kalamazoo, MI - February 25, 2013 - Landscape Forms is proud to announce that LEO, the company’s most efficient LED light, has won a 2012 Next Generation Lighting (NGL) Design Competition award. LEO won a “Recognized” award in the streetscape lighting category. It was one of just 37 lighting products out of 176 submissions to pick up an award at the annual Strategies in Light Conference, held in February in Santa Clara, CA. The LEO luminaire was designed by John Rizzi and engineered by Landscape Forms lighting engineers. The NGL solid-state lighting competition was created in 2008 to recognize and promote excellence in the design of energy-efficient LED commercial lighting luminaires. It is a joint initiative of the International Association of Lighting Designers (IALD), the Illuminating Engineering Society (IES) and the US Department of Energy (DOE). The NGL competition entries were judged by a panel of distinguished academics and industry professionals. Lights were subject to hands-on examination, documentation review and on-site installation and testing at the Virginia Technology Transportation Institute (VTTI.) They were evaluated against seven criteria: color quality, appropriate illuminance, light distribution, glare control, aesthetic appearance and style, serviceability and replacement, and value. LEO received special appreciation from the judges for its light distribution and glare control. Landscape Forms has made a significant mark on the design quality and performance characteristics of energy-saving lighting for outdoor environments. LEO is the second Landscape Forms product to win an NGL award. Lo-Glo, part of the Metro40 collection, earned a “Notable” award in 2009. The company continues its innovation in LED lighting and salutes John Rizzi and the Landscape Forms engineering team for LEO’s 2012 NGL award.

Caesarstone is proud to present nine colors ranging from five all-new, nature-inspired colors to vibrant red, bringing our Classico offerings to forty-one hues. Inspired by some of the world's most beautiful marble, Caesarstone’s latest innovation provides a natural look and feel which is ideal for all types of installations. These five colors are a unique blend of earthy tones and delicate infused veins with all the stain, scratch, and heat resistant qualities of quartz. Joining these natural-looking surfaces are four more brilliant colors which are perfect additions to our Classico palate. From red to black to neutral, these colors will add glamor to any design. Our color development team members are pioneers of quartz capabilities, bringing the most fashionable surfaces to the market. Caesarstone is pleased to add these nine new colors to our catalogue in 2013.

CHICAGO, IL – (February 27, 2013) – The Steel Stud Manufacturers Association (SSMA) announced today that its structural and nonstructural products received evaluation report ESR-3064P from ICC Evaluation Service (ICC-ES). Receiving the ICC-ES evaluation report coupled with ongoing SSMA independent third-party certification program offers the utmost level of confidence to architects, engineers, contractors, specifiers, building officials and others that SSMA products are manufactured to the highest quality standards and I-Code requirements. “SSMA has a long history of maintaining evaluation reports for its products,” said SSMA Technical Director Rahim Zadeh, P.E. “We are proud that SSMA is the first to receive an ICC-ES evaluation report that complies with the 2012 International Building Code for both structural and nonstructural products.” In addition to 2012 IBC compliance, the new ESR-3064P report complies with 2010 California and Florida Building Codes. This report replaces the existing legacy report ER-4943P. ICC-ES requires that all legacy reports be converted to ESR reports when technical changes are introduced. The ESR-3064P report is available for download on the SSMA website at www.ssma.com.

New 121 Cool Base and 121 Dry HI Now Available Anaheim, CA — February 26, 2013 - Parex USA, Inc., the parent company of leading building material brands; Parex, Teifs, LaHabra, El Rey, and Merkrete, unveils two new Parex EIFS basecoats & adhesives – 121 Cool Base and 121 Dry HI (High Impact). Designed with the contractor in mind, the two new products boast extreme coolness and unsurpassed strength. 121 Cool Base is a premium, white EIFS basecoat and adhesive that is incomparable in the industry. It produces a 30 percent cooler basecoat temperature than typical basecoats & adhesives, which results in less suction and hydration when a final finish is applied. This technology allows for improved finish coverage as well as a faster and easier finish application. “With the potential of improved finish coverage and ease of finish application, Parex’s new 121 Cool Base is set to make a big impact in the market,” said Heidi Larsen, Parex USA Product Manager. “When we presented a sneak peak of this product to contractors during our annual meeting, it was received with enthusiasm and overwhelming interest. Everyone was amazed at the drastic temperature differences between 121 Cool Base and standard EIFS basecoats & adhesives.” Parex also introduces 121 Dry HI – a high performance EIFS basecoat and adhesive that is fortified with a unique blend of raw materials for increased impact and puncture resistance. It yields up to 30 percent better impact resistance (compared to standard EIFS basecoats & adhesives). 121 Dry HI is formulated for enhanced workability and provides easier application. This product is ideal for ground floors and other areas where greater impact resistance is required. “In addition to providing 30 percent more impact resistance, 121 Dry HI also helps achieve higher ASTM/EIMA impact classifications,” said Larsen. “Typically, to achieve a “High” impact classification, a High Impact mesh (15 oz.) plus an additional layer of Standard Mesh (4.5 oz.) is required. Now, you can achieve a “High” impact classification utilizing a single layer of Intermediate Mesh (12 oz.) embedded in 121 Dry HI.” This system greatly reduces material and labor costs. 121 Cool Base and 121 Dry HI are one-component, polymer-modified, cement based dry products that are used as an adhesive to adhere EPS boards to existing substrates, a basecoat to embed reinforcing mesh and a leveler in Parex EIF Systems. Both 121 Cool Base and 121 Dry HI are shipped in 50 pound bags. Coverage, mixing instructions and limitations can be found in the Product Data Sheet at www.parex.com.

Chicago (Jan. 2013) – Opened in May 2012, Marian Regional Medical Center is one of the first California hospitals to use Chicago Metallic’s 1496 Seismic Perimeter Clip, as approved by California’s Office of Statewide Health Planning & Development (OSHPD). Following the 1994 Northridge earthquake, California passed a law requiring higher seismic standards established by the OSHPD and the California Building Code. Meeting the most stringent of these criteria, Dignity Health built Marian Regional Medical Center, a new $210 million, four-story acute care facility.

The ultimate engineering and contracting reference manual concerning waterstops — iPad Edition is FREE Concrete is everywhere: Buildings, fountains, parking decks, locks and dams, roads and bridges, and myriad other constructions. Because of its long lifespan, high workability, and near-worldwide availability, concrete is the preferred building material for large structures, especially those subject to hydraulic pressure. Not all concrete structures require protection from the ingress of water or other fluids, but those that do require a properly installed waterstop in and along their concrete joints. The concrete joint is the most likely point of leakage and waterstops are uniquely designed to prevent this. This book’s sole purpose is to educate the reader on all facets of waterstop.

1.8 Million Square-Foot Facility, home of Sketchers North American Distribution Center, Sets Record for Green Building sustainable development RANCHO BELAGIO, Calif., Feb. 19, 2013 /PRNewswire/ -- The U.S. Green Building Council (USGBC), the leading authority in green building will present the Highland Fairview-Skechers next generation Logistics Facility the Leadership in Energy and Environmental Design (LEED) Gold Certification at a ceremony next Friday, February 22 at 9 a.m. at 29800 Eucalyptus Ave. , in Rancho Belago, CA (eastern portion of Moreno Valley). The 1.8 million square-foot facility is the largest building of its kind in the United States to receive this honor. The USGBC, LEED Gold Certification ceremony will be held Friday, February 22 at 9:00 a.m. at the building and will be attended by representatives of the Office of the Governor of California, County of Riverside and City of Moreno Valley, along with VIPs and community leaders.

Product Receives Third-Party Verification for Structural Performance, Durability, and More MONROE, Ohio, Feb. 18, 2013 /PRNewswire/ -- Deceuninck North America, a leading designer and manufacturer of high-quality systems for windows, doors, and outdoor living, is pleased to announce that the company recently received code compliance research reports for Clubhouse® Decking (CCRR-0175), Clubhouse® Elite Railing (CCRR-1078) and Clubhouse® Plus Railing (CCRR-0185) from ATI Evaluation Service, a leading product testing service provider. The reports confirm that Clubhouse Decking and Railing products are in compliance with the 2012 International Building Code (IBC) and the 2012 International Residential Code (IRC) for structural and product performance. The code compliance research report (CCRR) provides the evidence, technical information and professional evaluation that a building official relies upon to determine that a product, component or method of construction complies with a specified code. A full copy of each report can be downloaded from the ATI website: www.architecturaltesting.com.

LAS VEGAS, NV. (February 13, 2013) – Projects from five states using the Fox Blocks ICF system were recognized at the ICF Builder Awards, recently held at World of Concrete in Las Vegas, NV. Within seven total categories, five Fox Blocks projects received awards. The annual awards competition showcases the most innovative projects from ICF companies around the globe and received fifty entries from the best in the industry. The award winners exemplify the energy-efficiency, creative architecture, and speed of installation that can be achieved with ICF construction. Fox Blocks, a leader in the development and manufacturing of Insulated Concrete Forms (ICF), was recognized with five awards: Fox Blocks took “Best in Class” honors in the light commercial category with the Charlotte-Mecklenburg Police Department: Steele Creek Division. Awards were also given in the heavy commercial category with Glasgow High School, in Glasgow, KY; light commercial category with the City of Las Vegas Fire Station 106, Las Vegas, NV; the large residential category, A Better House, Inc., Nashville, TN, and in the heavy commercial category with New Meadows Long-term Care Facility, Las Vegas, NM. The 2013 ICF Builder Magazine awards were announced during a ceremony on February 6th in Las Vegas at the World of Concrete. Finalists were scored on the complexity, visibility, size, and sustainability of the ICF project. A total of 50 total entries and 8 different brands of block were submitted for awards. The competition takes place as an annual event designed to recognize nominated projects that showcase the innovation, quality, and energy-efficiency of ICF construction, and promote ICF as a sustainable, durable and attractive building material. Judging is based on a project’s complexity, architecture, and how well it serves to advance the industry and raise positive attention to ICF’s. Judging criteria was weighted 20% for complexity and creativity, 15% for percentage of ICF’s, 15% architecture, 15% construction and site considerations, 15% significance/visibility/advances the industry, 10% size, and 10% sustainability. “We are honored to be recognized with these five ICF Builder Awards. Fox Blocks won five awards in three categories, with projects from five different states. This is important to us because it shows the broad usage of ICF and the wide variety of construction projects and climates that benefit from ICF construction,” said Mike Kennaw, Vice President of Sales. Fox Blocks ICF materials used in these award winning projects: • Charlotte-Mecklenburg Police Department: Steele Creek Division: Fox Blocks materials were used in 100% of the exterior walls, totaling 8,420 feet. In addition, there were 740 square feet of stem/knee walls. • Glasgow High School, in Glasgow, KY: Fox Blocks materials were used in 100% of the exterior walls, totaling 31,000 square feet. • City of Las Vegas Fire Station 106, Las Vegas, NV: Fox Blocks materials were used in 68% of the exterior walls, totaling 5,400 square feet. In addition, there were 1,339 of ICF interior walls. • A Better House, Inc., Nashville, TN: Fox Blocks materials were used in 100% of the exterior walls, totaling 7,645 feet. • New Meadows Long-term Care Facility, Las Vegas, NM: Fox Blocks materials were used 100% of the exterior walls, totaling 32,000 square feet. Fox Blocks new product lines include: Fox Blocks HV Clip, Fox Blocks Energy Stick, Fox Curb Block, and Fully Integrated Continuous Insulation Fox Buck. For more information, please visit www.foxblocks.com.

Hampshire, IL – DECK-O-SEAL, a division of W. R. MEADOWS offering a complete line of pool deck products, offers DECK-O-DRAIN® to collect and carry away water from concrete pool decks and patios. DECK-O-DRAIN is an easy-to-install, effective drainage system made of tough, long lasting PVC. The DECK-O-DRAIN system resists wear and is non-corrosive, providing protection for both the deck and subgrade. It is ideal for use on pool decks, driveways, patios and anywhere water collects and needs to be carried away. The unique non-directional design of DECK-O-DRAIN eliminates the need for right or left fittings. One attachment can be used for both by simply facing it in the direction needed. A flat contour profile allows a tight fit against any wall. In addition, there are no trenches to dig or deep excavations to make. DECK-O-DRAIN can be used as a screed rail in final flatwork preparation. For more information, contact DECK-O-SEAL, a division of W. R. MEADOWS, INC. by phone: (800) 542-POOL; fax: (847) 214-2268; e-mail: sales@deckoseal.com, or visit www.deckoseal.com.

LOS ANGELES, Feb. 13, 2013 /PRNewswire/ -- Emser Tile wins Best of SURFACES 2013 "INNOVATION" Award. Emser Tile, a premier designer and marketer of tile and natural stone participated in the annual Surfaces tradeshow in Las Vegas, NV, on January 29-31 th, 2013. The Surfaces' Award is the second consecutive for Emser Tile, presented by Floor Covering News and Surfaces Show. The award presents the opinion of the Surfaces Show's attendees. Last year, Emser Tile was presented with the "Style and Design" Award.

UPPER MARLBORO, Md.--(BUSINESS WIRE)--Today the NAHB Research Center announced that it has changed its name to Home Innovation Research Labs. Why would a company with a nearly 50-year history decide to make a move like this? To enhance the value its brand and certification mark provides clients in the increasingly competitive residential marketplace. Nothing in this name change alters the company’s relationship with the National Association of Home Builders (NAHB) as its independent subsidiary; its access to industry segments as a result of that relationship; or its unique research, testing, and third-party certification expertise. However, the new name will help provide building industry clients – such as product manufacturers, trade associations, home builders, remodelers, developers, and architects – with more brand equity and understanding with consumers. This change was not a decision reached lightly. Over the last couple years, Home Innovation staff worked with a leading marketing communications company in the housing industry and a leading brand consulting firm. In an exhaustive research process conducted by these third-party consultants, the company’s value proposition, name, and certification mark were tested with consumers, builders, and product manufacturers. With its long history steeped in research, the NAHB Research Center was accustomed to listening to data – and in regard to its name change, the data spoke loudly. Ninety-one percent (91%) of consumers surveyed said the new name (Home Innovation Research Labs) would impact their purchase decision favorably compared to the existing name, and 59% of builders surveyed said the new name was better than the existing name in conveying the meaning of the company’s certification seal and services. Interestingly, the builder group surveyed was about half NAHB members and half non-NAHB members, and support for the name change was equally positive with both groups. Ultimately, it was determined that a new name and accompanying marks would be the best strategy. As a first-phase of this brand overhaul, the company recently refurbished its online presence (www.HomeInnovation.com as of 2/12/13) to better describe and position its capabilities and its clients’ products, all aimed at enhancing its marketing value to clients and business partners. In order to make the name change transition as smooth and worry-free as possible for clients and business partners, Home Innovation Research Labs has rolled out a phased timeline for implementation of its new marks. The dates below indicate when everyone should begin seeing the new Home Innovation certification marks in use on products, green homes/buildings/land developments, and with builders, remodelers, developers, and architects participating in the company’s certification programs. February 12th Official NAHB Research Center name change to Home Innovation Research Labs goes into effect on corporate website and all documents/communications originating from our company Manufacturers able to initiate use of new logo/mark on products, websites, and in other marketing materials New certification marks include: Home Innovation Lab Tested™, Home Innovation Lab Certified™, Home Innovation NGBS Green Registered™, Home Innovation NGBS Green Certified™, and Home Innovation Quality Certified™ (see HomeInnovation.com/Services/Certification for more detail on these certification programs) April 1st All manufacturers must begin using Home Innovation Research Labs mark in some way; co-branding will be allowed/encouraged to alleviate any potential confusion among code inspectors October 1st All manufacturers required to complete transition from old to new certification marks For more information on Home Innovation Research Labs or the recent name change, visit www.HomeInnovation.com, follow us on Twitter @HomeResearchLab, or call 800.638.8556.

BUDAPEST, February 6, 2013 – GRAPHISOFT®, the leading Building Information Modeling (BIM) architectural software developer, has announced the launch of EcoDesigner STAR Public Beta, the first software that places standard-compliant energy analysis in the heart of the architects’ familiar BIM work environment. EcoDesigner STAR enables architects to design the most energy-efficient buildings, without having to rely on input from engineers or specialist consultants. Built on ArchiCAD 16’s native Energy Evaluation infrastructure, EcoDesigner STAR enables architects to use ArchiCAD's building information model (BIM) directly as a building energy model (BEM). This ensures streamlined collaboration between designers and energy consultants. Furthermore, EcoDesigner STAR offers standard-compliant energy analyses on the BEM and produces a detailed building performance report, all within the familiar ArchiCAD design environment. “Architects are taking more and more responsibility for the energy performance of their designs," said Laszlo Vertesi, Vice President of Development at GRAPHISOFT. “EcoDesigner STAR offers energy evaluation based on standard compliant technology, right out of the box, throughout the entire design process," he added. For more information about EcoDesigner STAR, and to sign up for the public beta trial, please visit https://redirect.aecdaily.com/s18122/edstarbeta.graphisoft.com/.

Philadelphia, Pennsylvania – MaxLite® will introduce new LED indoor products at Booth #3001 at Lightfair International (LFI) 2013, which will take place at the Pennsylvania Convention Center from April 23 to April 25. New additions to the MaxLED indoor line will include the following products: • The Omni A19 Lamp is the most versatile light source on the market with a 300-degree beam angle that replaces true A19 40-, 60- and 75-watt incandescent lamps in commercial and residential applications. • The family of Direct Lit Volumetric LED Troffers, offered in three standard sizes, is DesignLights™ Consortium-approved and has an architectural look. • The ECO-T LED Recessed Troffers, one of our best sellers, offer new models with the following advanced features: occupancy sensor, emergency battery backup and value engineered models. • The P2 family of LED Flat Panels feature higher efficacy LEDs at a lower price point. • The Utility Wraps with occupancy sensors and Vapor Tight fixtures open a new market for MaxLite in parking garages and stairwells. The highly efficient utility wraps are energy efficient replacement for fluorescent wrap-around fixtures that feature simplified on/off daylight harvesting, one to 10 dwell time, and field-adjusted dimming, for an additional 40 to 60 percent in energy savings compared to fixtures without controls. The Vapor Tight fixtures feature diffusion on the inside of the fixture for better optics and less dirt. • The new 6- and 8-inch commercial LED downlights are replacements for PL fluorescent and incandescent commercial down lights. • The BayMax™ LED Linear Fixture features A-B bi-level controls for reduced operating costs and replaces a 250- to 400-watt HID fixtures in high bay applications.

Join us for a Webinar on February 13 Space is limited. Reserve your Webinar seat now at: https://redirect.aecdaily.com/s18122/www2.gotomeeting.com/register/526775826 Waterstops for Environmental Compliance of Liquid Tight Concrete Structures is a targeted course of instruction and professional development for engineering firms engaged in the design of chemical, industrial, and environmental projects such as secondary containment of hazardous waste, industrial wastewater, ozone contactors, and others. The course is technical in nature and describes waterstops role in fluid-proofing concrete joints, chemical resistant polymers and steels, and state and federal regulations of compliance. The course is presented in one (1) hour time frame. Additionally, course attendees are eligible for Continuing Professional Development credit, as David is an instructor with both the Louisiana Engineering Society and the Louisiana Professional Engineers and Land Surveying Board. Course is certified for one (1) Professional Development Hour credit. Title: Waterstops for Environmental Compliance of Liquid Tight Concrete Structures Date: Wednesday, February 13, 2013 Time: 10:00 AM - 11:00 AM PST After registering you will receive a confirmation email containing information about joining the Webinar. System Requirements PC-based attendees Required: Windows® 7, Vista, XP or 2003 Server Mac®-based attendees Required: Mac OS® X 10.5 or newer Mobile attendees Required: iPhone®, iPad®, Android™ phone or Android tablet

A Roofing Approved, Walkable Waterproof Membrane and so much more... Duradek is a Complete Waterproofing System. With all components for successful installation researched and proven to be compatible with Duradek vinyl membranes. Compatible Adhesives - PVC Coated Drain Accessories - All Perimeter Treatments Plus—the performance you can count on Trained and Authorized Installers - 10-year Waterproofing Warranty Nearly 40 Years Performance History Duradek - Waterproofing Decks Since 1974 Duradek Ultra is the single-ply walkable, waterproof sheet vinyl roofing membrane for decks, patios and roof decks over habitable space. An attractive walking surface and complete waterproof protection in one! Ultra Tiledek is a single ply waterproofing/roofing membrane specifically designed for exterior tile applications. With a fabric embedded to the top layer, Tiledek provides superior adhesion of thinset to both the membrane and tile in exterior assemblies. Ultra Plazadek is a single ply waterproofing/roofing membrane. It is designed to be used under pavers, stamped concrete or duckboard systems, etc. Durarail is a powder coated aluminum railing manufactured in custom or standard styles for commercial or residential projects. Available in 9 standard colors, Durarail is offered in picket, glass or cable railing systems. Choosing Duradek as your complete decking materials provider is the ultimate assurance of peace-of-mind for professional installation. From waterproof underlayment or walkable vinyl surfaces to railing systems, an authorized Duradek installer brings specialized training, product compatibility knowledge and a single-source warranty.

Sweepstakes Winners from the 2012 BehrPro Experience Tour Honored as Company Celebrates Successful Five-Month Journey that Engaged with Thousands of Industry Professionals across the Country SANTA ANA, Calif., Feb. 4, 2013 /PRNewswire/ -- BehrPro SM , the professional products and services division of Behr Process Corporation, an experienced and trusted supplier of architectural paint and exterior wood care products, today announced the four winners of its 2012 BehrPro Experience Tour sweepstakes: Robert Saurman of Guss Investment Group in Huntington Beach, Calif., Izabela Paterek of All Seasons Services in Pikesville, Md., Bruce Bishop of B&B Painting & Power Washing in Rochester, N.Y., and David Tyler, a property manager based in Sierra Vista, Ariz. Each winner will be presented with a custom-wrapped trailer and trade tools totaling more than $10,000 during special celebration ceremonies held the week of Feb. 4, 2013. Media interested in receiving more information on the sweepstakes celebration ceremonies should contact Melody Demel at 619-234-0345 or behr@formulapr.com. For more details about Behr's commitment to the professional, please visit the company's website or connect with BehrPro on Facebook at www.Facebook.com/BehrPro and on Twitter: @BehrPro.

NEW ORLEANS, Feb. 1, 2013 /PRNewswire/ -- Benjamin Moore, one of the world's best-known paint brands, is once again joining forces with Make It Right in the continuing effort to rebuild the Lower Ninth Ward in New Orleans. The two organizations are bringing volunteers from around the country together for a day of service during this year's Super Bowl festivities in the Crescent City. Benjamin Moore, and a multi-city team of skilled painting contractors, will be painting one of the latest homes built by Make It Right. With many of these professionals coming from Baltimore to join a local volunteer crew—including several celebrities who support Make It Right—this round of pre-Bowl action is scheduled for Saturday, February 2, beginning at 11 a.m. According to Tom Darden, executive director of Make It Right, "Benjamin Moore has been a valued partner over the past five years, generously supporting our funding, supplying to date more than 10,000 gallons of paint products and even curating recommended color palettes that complement our architecture community. We fully appreciate all of the company's efforts, and are grateful that they've stepped up to sponsor this Super Bowl day of service, as well."

Hampshire, IL – W. R. MEADOWS, a leader in the construction product industry for more than 85 years, recently introduced BEM into its waterproofing lineup. BEM is a one-component, cold-applied, non-slump waterproofing material that can be used for a variety of detailing applications with building envelope products from W. R. MEADOWS. It is ideal for use in the forming of fillets and reinforcement at corners and as a flashing material. Curing to form a tough, flexible waterproofing membrane, BEM is a high-quality moisture curing elastomeric waterproofing and sealing material. The new product bonds to both asphalt and concrete and skins over in 50 minutes. Also, the solvent-free material will not shrink or freeze. In addition, BEM contributes to LEED credits including Indoor Environmental Quality and Energy and Atmosphere. For more information on BEM, call (800) 342-5976, e-mail info@wrmeadows.com, and/or visit www.wrmeadows.com.