Continuing Education

Saskatchewan Association of Architects

Saskatchewan Association of Architects - www.saskarchitects.com

Displaying 1 - 25 of 574 results.

FIRST [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST

  • Over the past few decades, exterior building spaces and roofs have significantly transformed from utilitarian ballasted roof systems to roof systems with highly programmed, environmentally conscious, people-friendly amenities that promote healthier lifestyles. A variety of products and materials can be utilized in the design and construction of roof gardens and decks. This course reviews the construction of basic types of roof systems and the range of hardscaping products that are available to designers.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Meeting the ventilation requirements of ASHRAE 62.2 and maintaining an energy efficient home means balancing the need for fresh outdoor air and the energy needed to condition it. In this course we will examine the ventilation requirements in ASHRAE 62.2, discuss how they can be met, and look at some solutions for energy efficient ventilating.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • In many climate zones, the heating and cooling of outside air (OA) is one of the largest energy loads and contributors to building emissions. Traditional commercial HVAC designs based on the Ventilation Rate Procedure (VRP) rely on large volumes of outside air to maintain acceptable indoor air quality, often resulting in oversized HVAC equipment and wasted energy. Adding to this, good indoor air quality is no longer just a matter of meeting code but is now seen as a necessity for business continuity, improved learning outcomes, and employee productivity. In this course, we will examine ASHRAE Standard 62.1, a recognized standard for nonresidential ventilation system design, and its Indoor Air Quality Procedure (IAQP), which allows for the use of air cleaning technology to offset outside air for a more efficient ventilation system design. We will review the requirements and calculations for this procedure, showing the impact on indoor air quality and energy use, and present a number of case studies. We will also show how IAQP used with air cleaning can help achieve LEED® v4 BD+C: New Construction and O+M: Existing Buildings and WELL v2™ certification.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour 15 minutes  

    Louvers are an essential part of every HVAC system, facilitating appropriate airflow and inhibiting unwanted penetration by water, snow, or debris through wall openings and into HVAC ductwork. However, they can have other purposes. Their simple design makes them a versatile addition and a unique style option to any project. This course presents the types, components, and applications of louvers, along with the primary specification considerations when selecting a louver solution.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour 15 minutes  

    Over time, urban parks and other open landscaped areas are being lost to development. One solution to mitigate this issue is to reconsider undeveloped areas such as building roofs to create green amenity spaces. Amenity decks can provide some alleviation of lost green space, while affording developers the potential to monetize underutilized spaces in their buildings and provide an advantage over older buildings to attract tenants.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 15 minutes  

    This course explores some of the different types of metal roof penetrations, concerns dealing with improper installation or failures, and associated details and installation practices to ensure a properly performing and long-lasting roof penetration.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Vehicle barriers are needed to protect property and occupants against various threats, including wayward drivers, accidental impacts, smash-and-grab burglaries, and vehicle-ramming attacks. Given the various barriers available, it is crucial to understand how to evaluate and select a perimeter security solution that suits each application. This course reviews the types of barriers and their related testing and performance standards to help ensure the right product is specified for the area it is intended to protect.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • This presentation provides in-depth knowledge of architectural sliding door systems. Up-to-date and detailed information is provided to help you understand how performance and design objectives can be achieved with this type of product. This session covers critical aspects, including product characteristics, properties, specifications, and installations, to improve the decision-making process.

             

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Kitchens have evolved, and so has the role of refrigeration in the home; there are a variety of factors that are contributing to this change. This course examines the social, economic, and demographic trends that are stimulating the reimagining of the kitchen space. The latest trends in kitchen design are discussed as is the role of modular refrigeration—a key design element in the creation of functional spaces that reflect the changing domestic landscape.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Rubber has been recycled for more than a century and used in recycled rubber flooring for over 65 years. Over this time, it has been proven to be a durable and flexible product that improves numerous aspects of the built environment while benefiting the natural environment. This course examines the sustainability attributes of recycled rubber flooring, how rubber is recycled, how it is used to make flooring, its health and safety benefits, and where to use and not use the product. The course also includes an overview of how recycled rubber flooring can be used to meet a number of USGBC’s LEED® v4 BD+C and WELL Building Standard® v2 credit requirements.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Specifying door products that are durable enough to withstand the rigorous demands of high-traffic applications in the healthcare and hospitality industries is crucial to the long-term success of each installation. This course reviews traditional doorway materials and doorway protection options, and provides design solutions that utilize engineered polyethylene terephthalate (PETG) components that extend the life of the door assembly and minimize health and safety issues for the building occupants.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.

             

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Insulated metal wall and roof panels allow quick and efficient construction, versatility, durability, and energy efficiency. This course looks at how the IMP manufacturing process results in a panel offering many benefits that align with the goals of the LEED® v4.1 Building Design and Construction (BD+C): New Construction and Core and Shell and the WELL Building Standard™ version 2 green building certification systems.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • When deciding on outdoor cabinetry, understanding the available material options is essential to the selection of a long-lasting, sustainable choice. This course reviews the pros and cons of these options, with a focus on the attributes, sustainability, and performance characteristics of marine-grade high-density polyethylene (HDPE) material, engineered to withstand extreme conditions while maintaining optimal structural integrity.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Architects and designers have many options for specifying site furniture products for their projects. Selecting materials and finishes is an integral part of this process, yet making material selections has become more and more complex. The course examines conditions and constraints of outdoor environments; evaluates materials commonly used in outdoor applications; discusses using green building standards and rating systems, and the role of suppliers as resources for material selection; and provides examples of products that adhere to a higher environmental standard.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Architectural resin panels are engineered to suit the demands of a wide array of interior and exterior applications and offer almost unlimited combinations of color, pattern, and design. This course presents the features and options that allow resin panels to meet design requirements for both function and beauty and discusses how resin panels may play a role in projects seeking LEED® v4 BD+C, ID+C, and O+M; Living Building ChallengeSM v3.1; or WELL Building Standard® v1 certification.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Wood is both beautiful and practical but lacks long-term durability when used outdoors. Acetylation changes the material properties of the wood at the molecular level to improve its stability and weathering capabilities. This course reviews the acetylation process, its impact on wood performance, and how and where this type of wood can be used. Also discussed are the green features of acetylated wood and how it can contribute toward earning points in the LEED® v4 green building rating system.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Today’s building professionals seeking better moisture management and energy efficiency from the exteriors of their projects are turning to rainscreens as a solution to both. Wood-plastic composite (WPC) provides a durable and long-lasting material suitable for use in rainscreen systems, decks, railings, and more. Reviewed in this course are the manufacturing process, performance and green benefits, and installation of WPC cladding that is fully capped with a polymeric plastic “shield,” providing long-term resistance to moisture, staining, and fading.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Modern security bollards are highly engineered and tested devices that can withstand deliberate ramming by a 15,000 lb vehicle. Bollards are more than decorative boundary markers; they are an essential tool to protect lives and property. This course explains bollard crash testing standards, reviews the pros and cons of available bollard materials, and discusses steel bollard designs for low- and high-impact applications.

             

     This course contains accessible design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Safety and security window films offer protection from a variety of events, from accidents and natural disasters, to break and entry and bomb blasts. This course examines safety and security window film and attachment systems and includes discussions on the history of films and film classifications, the functional benefits and applications of window films and attachment systems, and the relevant testing standards and specifications.

             

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Aesthetics, durability, and environmental performance are key considerations for architectural metal finishes. This course will help you identify long-lasting and sustainable aluminum extrusion coatings and includes discussions on the aluminum extrusion process; a comparison of powder and liquid coatings; an overview of the chrome and the chrome-free pretreatment processes; and the performance objectives of AAMA testing standards.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Single-skin metal siding can be used for a wide range of projects, from commercial buildings to educational, healthcare, residential, agricultural, and even high-end architectural designs. These siding panels can also contribute to green designs and certification programs. This course explores the different types of single-skin metal siding, specification details, and performance and design considerations.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • The Americans with Disabilities Act (ADA) applies to all state and local government agencies, commercial facilities, and public entities that have “places of public accommodation.” Presented in this course are the fundamentals of what accessibility means in terms of architectural door hardware specification. Topics include available hardware technology, the criteria for interior and perimeter access, and the codes and guidelines pertaining to the ADA requirements that affect door hardware selection.

             

     This course contains accessible design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

Displaying 1 - 25 of 574 results.

FIRST [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST