Building knowledge and connections

Continuing Education

BOMI. BOMI International, Independent Institute for Property and Facility Management Education - www.bomi.org

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Show All
  • The growth of EV (electric vehicle) adoption is accelerating and the behavior of EV drivers is increasing the demand for electric vehicle charging stations. This education course explains the different types of charging available and their suitable applications, and discusses the planning and installation considerations for electric vehicle supply equipment (EVSE).

    Prerequisites: No

    Course Level: Introductory

     This course is part of one or more "Course Collections". Click here to view the details...

  • Electrical devices impact the health, safety, and welfare of building occupants, so proper specification is critical. This course looks at electrical devices and the safety issues associated with them. The course includes discussions on the features of duplex receptacles, hospital grade receptacles, GFCIs and other electrical devices, and also discusses updated UL requirements and NEC codes.

  • Multifamily Group R construction has traditionally been access controlled by means of pin and tumbler mechanical locks. With the migration to electronic access control locks, it can be complicated to understand how to comply with building and fire codes. This course attempts to demystify electronic access control by addressing the basic components, important terms, and design and code considerations, and concludes with a look at a case study.

    Prerequisites: No

    Course Level: Introductory

     This course is part of one or more "Course Collections". Click here to view the details...

  • Elevators are integral to accessible, smooth, and efficient operations in many applications. For low-rise buildings, hydraulic or gearless machine room-less (MRL) elevators are most common; this course presents the differences between the two in installation, maintenance, speed, energy efficiency, sustainability, and cost. Also addressed are the distinctions between proprietary and nonproprietary elevator systems and recommendations on how to specify a nonproprietary system to maximize its long-term benefits.

  • In order to address tile installation difficulties effectively and avoid failures, designers and specifiers must maintain full awareness of current knowledge, practices, and products. This course reviews potentially problematic contemporary tile installation issues along with the industry guidance, methodologies, and products available to address them.

    Prerequisites: No

    Course Level: Introductory

  • This session will begin with an explanation of the importance of energy efficiency, particularly with today's evolving grid portfolio. Attendees will be provided with an overview of the energy modeling process and a methodology for integrating it into the design process. They will also learn about a variety of ways to think about improving energy performance in building design. Using a medical office building as a case study, the session will look at a number of appropriate energy-efficiency strategies and will demonstrate how different strategies can be combined to achieve higher performance and value.

    Prerequisites: No

    Course Level: Introductory

     This course is part of one or more "Course Collections". Click here to view the details...

     In order to download this course, a USD $50.00 fee must be paid.

  • Energy codes are appearing on the federal, state, and local level in an effort to reduce energy consumption, save consumers money, and reduce CO2 emissions. Whether new or existing, energy codes play an important role in the buildings we design, build, and ultimately live, work, and play in. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2013 and the 2015 International Energy Conservation Code® and identifies plug and lighting control strategies for energy efficiency.

     This course is part of one or more "Course Collections". Click here to view the details...

  • Data centers, some consuming up to 200X the energy of comparably sized office space, are rapidly evolving in numbers, size, location, and energy demands. These facilities are frequently becoming integrated into other buildings and the purview of the architect. This course reviews the data center impact on building design and then identifies and describes the most effective design approaches and fitments that building designers can employ to control their capital and operating costs, spatial needs, and energy consumption.

    Prerequisites: No

    Course Level: Introductory

  • Air curtains create a seamless barrier of air over any door, window, or opening, offering significant energy savings to building owners and helping to maintain interior building temperatures. This course examines how air curtains reduce whole building energy consumption, provide thermal comfort, and maintain air quality even when a door is open. The basic principles and theory of how air curtains operate and how to properly identify applications and maximize the air curtain’s energy savings potential are discussed in detail. Selection, application, and installation of the various types of air curtains are also explained.

     This course is part of one or more "Course Collections". Click here to view the details...

  • High-performance buildings require envelopes with thermal, air, and vapor layers that are typically installed individually and by separate contractors, adding to the complexity of their construction. Integrally-insulated concrete tilt-up panels provide multiple building envelope layers in one element. In this course we’ll look at these insulated concrete walls, the types, their components, their thermal and moisture resistant properties, and where they are used.

    Prerequisites: No

    Course Level: Introductory

     This course is part of one or more "Course Collections". Click here to view the details...

  • Segmental retaining walls (SRWs) can strengthen steep slopes, hold back soil in grade changes, create useable land, and enhance the aesthetics of any landscape. This course looks at the site and application factors that determine whether a segmental retaining wall must be engineered and soil reinforced, and provides technical information about the components and construction of an SRW.

  • Siding adds to the attractiveness of a residence while protecting the home from damage by the elements. Options for siding and trim encompass a variety of materials, including engineered wood, natural wood, fiber cement, and vinyl. This course reviews the features, performance characteristics, styles, and installation considerations of engineered wood siding and trim products.

     This course is part of one or more "Course Collections". Click here to view the details...

  • A gas fireplace is ranked #1 as a homebuyer’s highly desired decorative and appearance home products. This course provides an overview of the three steps for builders, architects, and designers to facilitate fireplace design and selection that will increase homebuyer satisfaction, as well as a discussion on the current trends of indoor and outdoor fireplaces.

  • Motorized doors in industrial and warehousing environments provide convenience, save time, and increase productivity. However, motorized doors also carry the risk of entrapment. This course explains the need for entrapment protection devices on motorized commercial and industrial doors and discusses how to specify the appropriate sensing edge actuation method and monitoring function to meet design, safety, and industry code requirements for specific building projects.

  • Not only is standing seam metal roofing (SSMR) robust and durable, but the seam itself also provides a convenient anchorage point for the mounting of rooftop equipment. This course reviews the features and advantages of SSMR in terms of durability and sustainability, and the appropriate attachment solutions for mounting equipment. The course focuses on nonpenetrating roof seam clamps and design considerations for their use with snow retention and solar panel systems.

    Prerequisites: None

    Course Level: Introductory

  • Our built environment must be optimized to create comfortable and healthier spaces. Shading systems can be used to enhance our spaces by providing optimal daylight and comfort to create an ideal indoor environment. This course reviews the performance, aesthetics, and material health of various shadecloth compositions and how each factor contributes to the shadecloth selection process.

     This course is part of one or more "Course Collections". Click here to view the details...

  • There is a growing realization that the buildings we live and work in play an important role in the health and wellbeing of building occupants. Green building rating systems are starting to incorporate health and wellbeing criteria and this course will look specifically at how products and materials can help meet the health and wellbeing requirements across these systems.

     This course is part of one or more "Course Collections". Click here to view the details...

  • Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.

  • Modern construction has come to understand that a façade, as part of an overall building envelope, is not only a visual statement, but also an important influencer in the protection of a wall’s structural components, the energy efficiency of the building, and the health of its occupants. This course explores a unique surfacing material known as ultracompact surfacing (UCS) and evaluates its mechanical properties, technical characteristics, and aesthetics to illustrate its endless design potential in exterior cladding, façade, and rainscreen applications.

  • Extruded polystyrene (XPS) and expanded polystyrene (EPS) are both types of rigid foam plastic insulation; their different manufacturing processes produce wide-ranging performance attributes, especially in water absorption and R-value. This course discusses the negative impact of water absorption on R-value and structural integrity; explains why codes and standards are sometimes specific in requiring XPS in applications where prolonged exposure to water occurs; and concludes with a look at best specification practices for accurate bids.

  • The modern aesthetic of metal facades is in high demand for applications ranging from education, healthcare, and office to residential and multistory mixed use. Recent high-profile fires have reinforced the importance of choosing the right metal cladding system that meets thermal performance requirements while not compromising life safety. This course compares various core materials and focuses on what the code requires for metal cladding in terms of fire performance testing and results and includes case studies from fire events around the globe.

  • The importance of keeping an armed intruder out of a building cannot be underestimated. Examined here are fenestration security risks, considerations, and solutions for educational, religious, commercial, and retail applications, as well as applicable performance testing and standards. The course provides an in-depth discussion on new, retrofit access-denial glazing systems that provide maximum protection against forced entry and ballistic threats.

    Prerequisites: No

    Course Level: Introductory

  • The use of life safety dampers is driven by requirements in various building codes. There are many different applications for which fire, fire/smoke, smoke, and/or ceiling radiation dampers can be used, each having its own specific purpose and unique installation requirements. This course gives an in-depth look at the different types of dampers and explains how and where they're each used and installed.

    Prerequisites: No

    Course Level: Introductory

     This course is part of one or more "Course Collections". Click here to view the details...

  • Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance.

    Prerequisites:No

    Course Level:Introductory

  • Demand for safety, energy efficiency, and contemporary aesthetics is driving building envelope design that incorporates increased amounts of combustible material in cladding, insulation, and water-resistive barriers. This course outlines the difference between insulated metal panels (IMPs) and metal composite material (MCM) panels, what IMPs are and their suitable applications, and building code and building envelope fire testing, and provides global case studies demonstrating the impact of IMPs on the building envelope after exposure to fire.

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Show All