Building Knowledge and Connections
Health, Safety, and Welfare
All courses identified as HSW, cover Health, Safety, and Welfare topics and have been approved by the AIA (American Institute of Architects) as an HSW Learning Unit (LU/HSW).
Displaying 101 - 125 of 602 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/890369
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.
https://redirect.aecdaily.com/s508058/www.aecdaily.com/course/1174986
This course explores how understanding disability can guide the creation of accessible and inclusive spaces. It examines access opportunities in educational and public environments, with an emphasis on strategies that go beyond code compliance. These approaches can help meet credit requirements in the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2 by improving usability, promoting occupant well-being, and reducing long-term barriers through design solutions.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/917631
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology.
https://redirect.aecdaily.com/s1162722/www.aecdaily.com/course/1174440
Off-leash dog parks are one of the fastest-growing segments of parks. As dogs are integral to families, designers should consider creating a park that benefits owners and their pets. This course discusses how dog parks contribute to owner health and well-being by increasing physical and social activity. Dog park design criteria are also examined, and case studies are reviewed.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/1212012
As concrete is a carbon-intensive building material, design and construction professionals are encouraged to make informed, low-carbon design decisions. This course explores the evolving path toward low-carbon concrete solutions. Discussions include mix design optimization and trade-offs, exposure class, benchmarks, environmental product declarations (EPDs), and potential contributions toward LEED® v5 Building Design and Construction credits. Structural design strategies, performance-based specifications, and project-level carbon budgets are presented as means to support project and sustainability goals and performance requirements.
https://redirect.aecdaily.com/s8761/www.aecdaily.com/course/792196
This course focuses on barrier free shower design and installation. Following a brief review of the reasons, benefits, and legal requirements for barrier free showers it summarizes the features and attributes of shower assemblies, relevant industry standards, waterproofing membranes and drains, best practices, installation methodology, installation tips and techniques, and walk/roll in showers. It includes a review of the design considerations and advice for the creation of perfectly performing showers which follow the latest design trends.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220
Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.
https://redirect.aecdaily.com/s1202729/www.aecdaily.com/course/1215756
Polyvinyl fluoride (PVF) wallcoverings are used in commercial interiors for their durability and long‑term performance in demanding environments. This course examines how PVF functions in high‑traffic settings, including hospitality, healthcare, retail, restaurants, and multifamily applications, where surface resilience is a key consideration. The course also evaluates wallcoverings designed to resist wear and microbial growth, supporting hygienic conditions and consistent design performance in demanding applications, and possible contributions toward LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.
https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/791360
Commercial rolling service doors offer high performance solutions for demanding areas. Used both internally and externally, these doors provide excellent thermal insulation, strength, and durability in challenging environments. This course examines the characteristics of rolling service doors, fire doors, grilles, and shutters. Door operation, parts, fire code requirements, and wind load information are also discussed.
https://redirect.aecdaily.com/s1158953/www.aecdaily.com/course/1193976
This course explores some of the tools at the core of sustainable facility management and how they can enhance indoor environmental quality, reduce environmental impact, and improve occupant well-being. It reviews how operational strategies can support organizational performance and talent attraction and retention in a changing workplace landscape. The course examines emerging trends, new tools and practices, and shifts in certification frameworks such as the LEED® v5 Operations and Maintenance and Building Design and Construction rating systems and the WELL Building Standard™ version 2 that reflect the growing demand for measurable performance and decarbonization efforts.
https://redirect.aecdaily.com/s738249/www.aecdaily.com/course/815723
Obesity rates in the U.S. have reached epic numbers and correlate to significant health and economic impacts. Outdoor obstacle courses in public green spaces can provide appealing, effective, and free training equipment to the community to help increase physical activity. Review the theories of obstacle course training and guidelines for their design and installation.
https://redirect.aecdaily.com/s797385/www.aecdaily.com/course/1188886
Birds are an important part of ecosystems, performing many essential ecological functions. Unfortunately, millions of birds are killed every year due to collisions. This course discusses how architects can include bird-safe glass design strategies in their projects to significantly reduce the number of bird collisions and positively impact the environment and biodiversity. It also examines how bird-safe glass may help projects satisfy credit requirements in the LEED® v5 Building Design and Construction rating system.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1058864
Selecting flooring is an important decision, but equal emphasis should be placed on proper surface preparation to avoid costly flooring failures. This course reviews best practices for a typical hardwood flooring installation and discusses the innovative options that consolidate products and steps, saving time and money while enhancing certain performance characteristics.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1148214
Electrical systems that deliver access to permanent power and enable device connectivity are critical components of the design and operation of high-performance buildings. Today’s mobile technology means people can connect and move freely between the indoors and outdoors and integrate their social and work lives anytime, anywhere. This course examines permanent outdoor power delivery offerings, including personal and electric vehicle charging stations, in-ground power boxes, and rooftop boxes, that support the growing demand for connectivity and data and audiovisual communications in outdoor spaces and help to create an outdoor environment that promotes longer stays, stimulates creativity, and increases productivity.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/925265
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications.
https://redirect.aecdaily.com/s403098/www.aecdaily.com/course/1123475
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1067121
Electric vehicles (EVs) are rapidly becoming ubiquitous. To serve them sufficiently, there must be a massive expansion of car charging options, and that infers that planners and designers must create those options and opportunities now. This course examines the current trends in, and predictions for, EV chargers, the various types and their attributes, where and how they might be installed for maximum effectiveness, and the programs and incentives that apply to both EVs and their charger requirements.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/1145493
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency.
https://redirect.aecdaily.com/s13250/www.aecdaily.com/course/909350
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1035660
The reasons for and benefits of adopting STEP have become increasingly clear as both national and international communities continue in their efforts to transition from dirty fuel sources to renewable ones. This course reviews the various systems and strategies that enable STEP, such as smart grids and microgrids, and explores strategies that STEP enables, such as integrated design processes, efficient water management, and energy innovation.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/965465
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. Now, in the wake of implementing pandemic protocols, our acoustic comfort in these spaces is greatly challenged. This course examines the impacts of poor soundscapes in educational facilities and introduces innovative solutions for improving acoustics in these areas while keeping us comfortable and safe from exposure to emerging viruses.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/1029637
Solid surface is a popular material choice due to its beauty, durability, and ease of cleaning. Selecting a solid surface depends on the manufacturing process, the raw materials involved, and the material’s sustainability. This course examines solid surface as a decorative material, discusses its characteristics and attributes, and compares it with other hard surface materials
https://redirect.aecdaily.com/s867585/www.aecdaily.com/course/889638
The growing global population is creating an increased demand for resources. As a result, there is a need to replace fossil-based, nonrenewable building materials with more bio-based materials, such as bamboo. This course describes the properties of bamboo that make it a more sustainable choice, including its fast growth and CO2 saving and storing potential. It also discusses how active bamboo reforestation and the use of durable bamboo products can lead to CO2 reduction across many industries.
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967
As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s921773/www.aecdaily.com/course/1009739
Changing climate and land use patterns have necessitated a greater focus on stormwater management. The trench drain industry has developed in a rather fragmented way over the decades, with each manufacturer using their own unique reference points for dimension, load rating, and other criteria. The purpose of this course is to clear up the resulting confusion and provide best practices and a real-world understanding of the multiple variables at play on the project level.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
