Continuing Education

Florida Board of Professional Engineers

Florida Board of Professional Engineers - www.fbpe.org

Displaying 51 - 75 of 572 results.

FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST

  • In order to address tile installation difficulties effectively and avoid failures, designers and specifiers must maintain full awareness of current knowledge, practices, and products. This course reviews potentially problematic contemporary tile installation issues along with the industry guidance, methodologies, and products available to address them.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.

             

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Fundamentally, a building envelope functions as an environmental separator, and has specific hygrothermal control requirements. This course examines how insulated metal panels (IMPs) create the perfect envelope solution, incorporating the same control layers as site built wall systems. Discussions include: building envelope design; perfect/universal walls; and the use of IMPs to provide the building envelope’s exterior finish, and the air, vapor, water, and thermal barriers.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour 15 minutes  

    Birds, bird droppings, and nesting materials can detract from buildings' architectural features; more importantly, they can negatively impact the environment by creating health and safety risks. Eliminating a bird problem requires a strategic combination of preventive measures and proven bird control products. This course explores the characteristics of common birds, bird problem assessment, and the solutions designed to deter the roosting and nesting of pest birds.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour 30 minutes  

    From classrooms to boardrooms to living rooms, hanging display systems enhance spaces and provide design freedom. This course examines wall hanging systems with a focus on integrating systems in the overall design of a project and includes discussions on system elements, selection criteria, specialty applications, and sustainable design.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Flexible work scheduling, telework, virtual work, and the high cost of office space are some of the drivers of the 21st century workspace. This open, flexible, adaptable, and casual space must still serve not only the technological needs of its users, but also the accessibility needs of a diverse population. This course examines the technical requirements for providing accessibility, universal design, and ergonomics in an open office space and looks at a variety of solutions in the functional areas of the office: open office areas, the workspace, and collaboration areas.

             

     This course contains accessible design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Drying hands thoroughly is crucial for maintaining hygiene levels, and when a hand dryer is too slow, the result is many people give up trying to dry their hands and leave the bathroom with wet or damp hands. Research has shown that damp hands can transmit up to 1,000x more bacteria than dry hands. This course discusses hand-drying concepts and the advantages of hand dryers with air knife technology. It also reviews the impact the choice of hand-drying equipment has on public health, occupant comfort, facility operations, and our environment.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Efficient water use and conservation are key parts of sustainable development. Toilets account for the greatest water usage within a residential home (typically 30 percent). Dual-flush toilets are an option to reduce water usage by up to 20 percent while meeting the LEED® v4 Water Efficiency requirements. This toilet option can also be incorporated into accessible bathrooms and use touchless flush plates. The most attractive feature of the dual-flush toilet is that it does not require significant behavioral changes for benefits to be realized.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation.

    This course is one of two identical courses titled Water Conservation: Initiatives and Standards. You will receive credit for taking only one of these courses.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • In food and beverage, food processing/distribution, and cold storage facilities, it is important to use doors that can provide speed, safety, separation, and security. High-speed, high-cycle, roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The specification criteria, design, and installation considerations for high-performance doors are also discussed.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Fireplaces remain one of the main focal points of a home. No longer used only for heating or cooking, and coupled with advances in technology and fuel options, fireplaces have evolved into an architectural component of the designed living space. Modern gas fireplaces offer an environmentally friendly heating solution with high efficiency ratings and contemporary designs that don’t sacrifice form for function. This course offers an overview of contemporary fireplace styles, options, venting, and installation, with a focus on cool wall technology and how it allows electronics and other design elements to be safely mounted over a fireplace.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour 15 minutes  

    An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.

             

     This course contains accessible design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • This course explores the use of coil and extrusion coatings (70% PVDF metal coatings) for protecting and enhancing exterior façades. It demonstrates how utilizing color and aesthetic attributes can further enhance a building’s impact and brand recognition. The coating application/treatment process is also discussed in detail. Sustainability benefits that 70% PVDF coating has to offer are outlined, and real-world case studies show the positive impact that 70% PVDF coatings can have on a project.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285.

             

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Lack of secure bicycle parking and storage is one of the top barriers to increased bicycle ridership. However, there is much more to selecting functional and appropriate bike storage than installing a few racks at the building sidewalk. This course examines best practices for bicycle racks and shelters for indoor and outdoor bicycle parking and storage, including typical municipal guidelines and regulations, incentives, guidance on shelters, and rack planning and design.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • In response to steadily growing demands for more and more storage capacity and the costs and energy required to implement that storage, data center design is now focusing on solutions that conserve energy, materials, money, and space. This course explores the current influences that directly or indirectly affect energy usage and management, the resulting trends in data center development, and how containment strategies enable designers to optimize energy efficiency and create facilities with minimal environmental footprints.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.


  • 1 hour   

    Designing a structure that is resilient requires a strong understanding of material and building science. This course discusses the composition, performance, and application of engineered polymer siding and trim and capped polymer cladding to illustrate the benefits to home and building owners when construction materials are selected with resilience and sustainability in mind.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • This course introduces accessibility from Canadian and US perspectives. It covers a few specific technical accessibility requirements and compares the differences when referencing Canadian or US design standards, such as the National Building Code of Canada (Canada's Model Code) or the Americans with Disabilities Act (ADA) (the United States accessibility regulation), while reinforcing the intent of good design that is not always outlined by a code or standard. The seven principles of universal design are also discussed.

             

     This course contains sustainable design information. See the course details page for more information.

     This course contains accessible design information. See the course details page for more information.

     In order to download this course, a USD $35.00 fee must be paid.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • This course explains and illustrates how high-performance, fully composite insulated sandwich wall panels can be detailed to achieve continuous insulation. It explores the pros, cons, and attributes of wythe connectors such as carbon fiber trusses as well as panel insulation options, manufacturing and testing procedures, and installation methods. It concludes by providing a comprehensive set of sample installations to illustrate the broad range of building types and appearances that can be created with insulated sandwich wall systems.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation.

    This course is one of two identical courses titled Water Conservation: Initiatives and Standards. You will receive credit for taking only one of these courses.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • There is an extremely wide array of coated or composite fabrics available on the market, each type formulated for specific uses and with different levels of performance and quality. To assist in the decision-making process, standards have been developed to show product performance, facilitate quality control, and assure designers that the product they are specifying is suitable for normal commercial use. This course briefly outlines the history, properties, and uses of coated fabrics, the intent and content of one coated fabric standard, and the testing protocols that support it.

             

     This course is part of one or more "Course Collections". Click here to view the details.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • Due to advancements in architectural decorative glass technology, the number of design options available to help designers and architects achieve the specific aesthetics and performance requirements they desire has dramatically increased. This course provides a review of architectural decorative glass including product options, applications, features, and specification considerations. Also discussed is how decorative glass can contribute to sustainable design and LEED® initiatives.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

  • New technology and improvements in masonry veneer installation can help your team save time and money in the construction process while providing superior results. In this course, you'll learn how cutting-edge technology is helping masons move beyond traditional lath and scratch and be introduced to the principles behind enhanced masonry veneer installation systems (EMVIS). Learn how to create permanent, high-strength installations for residential, commercial, and industrial applications using EMVIS with fortified mortars and innovative waterproofing barrier membranes that protect against air and water penetration.

             

     This course contains sustainable design information. See the course details page for more information.

     This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.

Displaying 51 - 75 of 572 results.

FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-125] NEXT LAST