Registered Continuing Education Program

The Registered Continuing Education Program (RCEP) is a nationwide portal for professional development education and record-keeping. Continuing education providers and education seekers (engineers, surveyors, and related Architecture/Engineering/Construction (A/E/C) industry professionals) can tap into a single, comprehensive, and convenient education management system.

Click to Learn More About the Registered Continuing Education Program

Visit www.rcep.net and Join Now!

Displaying 626 - 648 of 648 results.

FIRST PREV [526-550] [551-575] [576-600] [601-625] [626-648] LAST

  • ( ~ 1 hour ) 

    Designing with green roofs affords design professionals opportunities to plan projects with exciting new elements, added value, and significant, tangible benefits, thereby enhancing the built environment with newly-created landscapes. This course examines green roof systems, including the types, benefits, components, and related standards. As well, it provides a discussion on how green roofs mitigate urban heat island effect and reduce stormwater runoff.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Concrete masonry units (CMUs) are made from dry-cast concrete, which uses less cement and sequesters carbon at a faster and greater rate than wet-cast concrete. This course begins with an overview of concrete products and the differences between dry- and wet-cast concrete, then explores the relationship between concrete and the carbon cycle, recent research into CMU sequestration rates, and the results of mini life-cycle assessments comparing different wall systems. Finally, some practical strategies for further reducing embodied carbon are reviewed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Saunas that exude authentic Nordic minimalism and elegance promote wellness, relaxation, meditation, and socialization. There are many different types of saunas for private or public purposes, but a few unique features and finishing options set some sauna designs apart. This course explains why the sauna has a much deeper tradition than wellness and discusses the considerations for selecting a ready-made or tailor-made sauna solution.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The interior design industry will play a critical role in meeting the challenges of our increasingly changing world. However, the current practice of design is flawed and becoming increasingly marginalized by standard operating procedures. Business-as-usual approaches challenge effective responses to the diverse and evolving needs of humanity. Life happens in all the spaces we create. Without design, the way we experience living and each other would be drastically different. Beyond outcomes and aesthetics, what would reframing design to consider the diversity of our modern world look like? Learn how it would impact our creative processes and representation of "good design." Join the conversation to explore and see our industry through a new lens that will change the way you see design forever.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    High-performance, fully composite insulated wall panels deliver all the benefits of factory precasting with load-bearing and energy efficiency performance from the lightest, thinnest panels possible. This course describes the makeup and cost efficiencies of composite precast panels, their benefits when made with carbon fiber grid shear trusses, and considerations for selecting among the insulation options. The majority of the course focuses on case studies of successful precast enclosure projects in a wide variety of building types across a range of markets.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    According to building professionals, the solution to achieving an energy-efficient building envelope is to focus more on the roof. Protected membrane roof (PMR) assemblies deliver thermal efficiency and can play a valuable role in a sustainable design strategy. Presented in this course is a review of the components, advantages, ballast options, and design and installation considerations of PMR assemblies.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    While natural stone veneer has a timeless popularity in commercial and residential applications, its cost, weight, and availability can make it prohibitive for some projects. Natural-looking manufactured stone veneer alleviates those concerns but still requires time and experience in mortared stone installation. This course explores these options and then introduces the latest manufactured stone product, a panelized, mortarless veneer that installs with the ease, speed, and all-weather flexibility of siding. Application examples and case studies present the many options that offer a real stone aesthetic without the time, skill, and constraints required for mortared applications.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course discusses the benefits of PL safety products and the codes and testing standards related to PL way-finding systems.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Industrial-strength ladders must provide functional safety for users in varied and demanding building environments. Aluminum ladders are up to the challenge of virtually any application thanks to aluminum’s high strength-to-weight ratio, durability, and corrosion resistance. This course reviews ladder types and safety considerations and discusses how the sustainability benefits of aluminum along with its other attributes make it an ideal material for heavy-duty ladders.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The availability of parking and the time it takes to park a vehicle are major challenges when designing a new development. Parking garages typically require big volumes and are not efficient with land use. Automated parking can practically reduce parking space, while providing the same (sometimes more) number of parking stalls as a conventional garage. It also improves the user experience, providing a valet parking experience, just without the valet.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    When renovating an existing bathroom, there is a choice between the resurfacing of existing wall coverings, bathtubs, or showers and a complete renovation where all the existing elements are removed and replaced with new ones. This course outlines the pros and cons of each alternative and introduces modern acrylic products as an excellent choice for either. You will learn all the ways that acrylic can be utilized in both new and renovated bathrooms and all the technical information required for a successful design outcome.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 2 hours ) 

    This presentation focuses on four major areas of managing a LEED project team from the general contractor’s perspective. It includes an overview of the integrative process; identifying potential members and responsibilities of the project team and discussing how to implement that process in detail; investigating why the role of a LEED project manager is critical to the success of the project; ideas based on personal experience; and examples of past projects with best practice recommendations for a practical approach.

    Ask a Question
    SAVE FOR LATER

     In order to download this course, a USD $70.00 fee must be paid.

  • ( ~ 1 hour ) 

    Water is a valuable resource, yet many states suffer water shortages due to preventable issues, such as overuse and leaks. This course presents the increased need for water conservation and provides an overview of the EPA’s WaterSense® program. Examined are how plumbing fixtures can meet the requirements of green building codes, standards, and rating systems, including LEED® v5 Building Design and Construction (BD+C). Healthcare, institutional, and residential case studies demonstrate the benefits of water-efficient plumbing fixtures.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The Americans with Disabilities Act (ADA) sets the minimum requirements for newly designed and constructed or renovated state and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities. Many projects must also follow the provisions of the 2017 version of ICC A117.1,  Standard for Accessible and Usable Buildings and Facilities . This course identifies the benefits of accessibility standards and the prescriptive requirements for accessible restrooms set by the ADA and ICC A117.1.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Personal and corporate security is a steadily increasing issue of concern, and more homes and businesses are installing gates to control who can enter or leave. Sliding cantilevered gates, with their wide range of design and operating options, are increasingly popular for these installations. This course outlines their advantages; the many ways they can be designed, built, and operated; and those aspects that make them safe, aesthetically appealing, and reliable. The course concludes with a series of illustrated sample installations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Life-safety systems encompass both passive fire-protection features, like compartmentation and firestopping, and active ones, such as sprinklers and alarms. Portable fire extinguishers are an integral part of life-safety systems and must meet code-mandated number and placement requirements in most building types. This course looks at how fire extinguishers can be stored safely and securely in cabinets and addresses specification considerations. Also reviewed are the many options available to customize fire extinguisher cabinets so they are tailored to each project’s needs and design goals.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Specifying door products that are durable enough to withstand the rigorous demands of high-traffic applications in the healthcare and hospitality industries is crucial to the long-term success of each installation. This course reviews traditional doorway materials and doorway protection options, and provides design solutions that utilize engineered polyethylene terephthalate (PETG) components that extend the life of the door assembly and minimize health and safety issues for the building occupants.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Concrete is often the substrate for both new and existing floors. Transforming the surface into a finished floor is far more sustainable than consuming additional flooring materials, adhesives, and transportation-related energy to install a floor covering. This course discusses the stages and options of the concrete polishing process, recognizes benefits of recent advances in concrete densification chemistry, and provides an overview of the limitations and possibilities for concrete floor finishes.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In applications where wood may be exposed to moisture, insects, or fungal organisms, preservative-treated wood can ensure a project’s durability. This course reviews: the manufacturing process for pressure-treated wood; types of preservative treatments and the required levels of retention as dictated by the end-use application, desired service life, and exposure conditions; American Wood Protection Association (AWPA) Use Category standards; current issues concerning preserved wood in residential and commercial construction; and Best Management Practices (BMPs) for aquatic uses.

    Ask a Question
    SAVE FOR LATER

Displaying 626 - 648 of 648 results.

FIRST PREV [526-550] [551-575] [576-600] [601-625] [626-648] LAST