Concrete-Faced Continuous Insulation Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646

Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

Building Science Master Summit: Designing for Long-Term Below-Grade Thermal Performance ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/924077

This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection.

Air Curtains: Energy Savings & Occupant Comfort ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/893368

An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.

Concrete That Cleans Itself and the Environment ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200

Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.

Redwood Lumber: Attributes, Applications, & Environmental Benefits ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s632921/www.aecdaily.com/course/835833

Redwood offers warmth, character, durability, and strength in products from sustainably managed and harvested forests. This course provides insights into forestry practices and the environmental benefits of redwood lumber, and compares redwood with other common decking materials. Details are presented on how to differentiate and specify grades of redwood; finishing options and methods are also discussed. The course concludes with examples of applications that showcase the unique beauty and attributes of redwood.

Metal Roof Design in HVHZs: Best Practices for Architects and Roof Designers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835

The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.

Designing with Perforated Metal ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s369432/www.aecdaily.com/course/923938

The architectural uses for perforated metal span a wide variety of interior and exterior applications for residential, industrial, and commercial projects. Reviewed in this course are the applications and the specification considerations for standard and custom perforated metal, along with a discussion on how it is used to sculpt light, control sound, and compose views.

Building Envelope Guidelines for Mass Timber ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s480282/www.aecdaily.com/course/970413

As interest in cross-laminated timber (CLT) buildings grows, the market for building enclosure products as a whole has yet to fully provide the water-resistant barriers, vapor retarders, and air barriers to optimally support the unique characteristics of wood. Furthermore, there are few building enclosure design guides specific to detailing wood-framed walls and roofs. This comprehensive course fills the gaps, providing detailed information on mass timber, building enclosure issues, the vapor-permeable technology available to address wood’s unique moisture characteristics, and a how-to guide on detailing the walls and roof of the enclosure.

Current Approaches to Sustainable Community Planning, Part 1 ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/968977

The tools, techniques, and approaches to sustainable community planning (SCP) have evolved substantially in the last few decades, turning it from an abstract notion into a most comprehensive and beneficial planning approach. Part 1 of this two-part course examines the basic principles that these tools and approaches are based on, the local and global issues that they must address to be effective, and the nature and structure of the tools themselves. The review includes numerous links to the sources of these tools.

Design with Sectional Overhead Doors for Safety and Security ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/930425

Today’s sectional overhead doors are more sophisticated than ever. Options include high-strength glazing for security and insulated steel sections for increased energy efficiency and durability. Code requirements for safety in high wind-load areas, impact resistance to hurricanes, and reductions in air transmission have led to improvements in door technology and hardware. This course examines a range of safety and security options for architects to consider when designing and specifying sectional overhead doors.

Two-Hour Fire-Resistance-Rated Walls ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s379494/www.aecdaily.com/course/391748

Single-family attached residences (residences that share one or more walls between neighbors) are required to utilize area separation walls between units. A key design criterion of any firewall—besides its fire rating—is that it be structurally independent in a fire. This course evaluates two-hour fire-resistance-rated walls used in single-family attached and multifamily residential construction, the options available in today’s marketplace, firewall installation requirements, and fire-resistance testing.

Reimagining Recycled Rubber as High-Performance Flooring for Museums ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s17445/www.aecdaily.com/course/1053011

The choice of flooring is an important consideration in museums; their popularity brings a high volume of foot traffic, and museum spaces have a wide range of flooring needs. This course discusses how recycled rubber flooring is a good choice for museums because of its sustainability, durability, low maintenance requirements, performance attributes, and wide variety of design options.

The Art of Airflow: Custom Ventilation Grilles ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1608/www.aecdaily.com/course/903341

Ventilation grilles influence HVAC system performance but can pose aesthetic challenges for designers. Custom grilles made with modern fabrication techniques employ a variety of materials and finishes to create solutions that enhance and fully integrate with architectural interiors. This course discusses the basic mechanics of effective air distribution in buildings, performance characteristics of grilles, grille types, and custom design options.

Exterior Wall Fire Performance with Polyiso CI for Types I–IV Construction ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/926641

The increase in building energy efficiency requirements has led to the use of exterior continuous insulation (CI) to improve the performance of the building envelope. This presentation reviews the benefits of polyiso continuous insulation and then examines in detail the NFPA 285 test standard and fire safety requirements of the 2021 International Building Code for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I–IV).

Spray Foam 101: Taking Construction to the Next Level ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s356556/www.aecdaily.com/course/1042076

This introductory course on spray polyurethane foam (SPF) covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction, as well as safe SPF installation practices. Participants will come away with a strong knowledge of how the proper use and application of spray foam can improve the indoor environment and the durability of the built environment.

Sustainable, Strong, & Safe:A Guide to Aluminum Industrial-Strength Ladders ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s859/www.aecdaily.com/course/1169560

Industrial-strength ladders must provide functional safety for users in varied and demanding building environments. Aluminum ladders are up to the challenge of virtually any application thanks to aluminum’s high strength-to-weight ratio, durability, and corrosion resistance. This course reviews ladder types and safety considerations and discusses how the sustainability benefits of aluminum along with its other attributes make it an ideal material for heavy-duty ladders.

Designing Sliding Cantilevered Gates ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s951064/www.aecdaily.com/course/968151

Personal and corporate security is a steadily increasing issue of concern, and more homes and businesses are installing gates to control who can enter or leave. Sliding cantilevered gates, with their wide range of design and operating options, are increasingly popular for these installations. This course outlines their advantages; the many ways they can be designed, built, and operated; and those aspects that make them safe, aesthetically appealing, and reliable. The course concludes with a series of illustrated sample installations.

Polyiso: The Next Generation Air and Water-Resistive Barrier ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12209/www.aecdaily.com/course/892901

In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements.

Commercial Restrooms Reinvented ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/986127

Commercial restrooms are used in various settings, from office buildings to hospitals. This course discusses how commercial restroom design can meet the needs of all users through accessibility, universal design, and inclusive design. The public nature of restrooms requires excellent air quality, a trusted level of cleanliness, durability, and water conservation. The importance of fixtures with features including touchless technology, vandalism resistance, and water efficiency is also discussed.

Transitioning to a Clean Energy Future: Part 3 ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1037314

Energy creation, distribution, and consumption are all in a period of transition. Understanding this transition and its benefits is critical to sustainable transitional energy planning (STEP). This course reviews the nature of the transition, the forces driving it, emerging energy systems and sources, and international and national examples. It details the process required for STEP and provides a comprehensive overview of the many renewable energy options now viable for community energy systems. It concludes with a series of illustrated sample plans and projects.

Drainage: Vertical and Horizontal Building and Sitework Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s671/www.aecdaily.com/course/992134

Building science experts acknowledge the need for drainage in both vertical and horizontal applications in order to eliminate moisture issues and extend the life of the building. This course examines foundation wall, green roof, and plaza deck applications and discusses the factors that impact drainage, including soil permeability, saturation, land cover, and loading. Flow rate standards are discussed, and drainage composite mat installation is explained.

Achieving Fire Suppression and Safety with Standpipe Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s425610/www.aecdaily.com/course/901840

It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements.

Skylights: Their Role in High-Performance Building Envelopes ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1072132/www.aecdaily.com/course/1091959

Well-designed and detailed skylight systems can significantly improve both building and occupant performance. This course explores the benefits, techniques, and importance of daylighting systems that utilize high-performance skylights to optimize daylighting benefits, avoid negative impacts, and contribute positively to building, occupant, and envelope performance. It examines how daylighting with skylights can help meet the requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL v2 Building Standard™.

Beyond Curb Appeal: Choosing the Right Exterior Trim for Your Project ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1151407/www.aecdaily.com/course/1171479

Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considerations and embodied carbon; and key considerations for choosing the right trim. Finally, the course applies these concepts to several design scenarios and identifies the appropriate trim option for each.

Window and Door Security Solutions: Forced Entry, Storm, Blast, and Ballistic Protection ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1158080/www.aecdaily.com/course/1167954

This course examines threats to window and door integrity in buildings, including forced entry, ballistic impact, storm debris, and blast pressure. It covers retrofit and replacement approaches that strengthen glazing systems, explains relevant testing protocols, and addresses misleading performance claims. The course concludes with guidance on how to assess existing conditions and specify solutions that support occupant safety, risk mitigation, and building resilience.