Architects Association of Prince Edward Island

The Architects Association of Prince Edward Island (AAPEI) is the self-regulating body formed to administer and regulate the practice of architecture in the province of PEI.

Click to Learn More About the Architects Association of Prince Edward Island

Visit www.aapei.com and Join Now!

Displaying 601 - 623 of 623 results.

FIRST PREV [501-525] [526-550] [551-575] [576-600] [601-623] LAST

  • ( ~ 1 hour ) 

    Precious metals are valued for their beauty, durability, scarcity, and workability. This course explores the history, symbolism, and characteristics of precious metals and how to use them in modern luxury bath and kitchen design.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course provides architects and designers with a comprehensive understanding of the transformative potential of modern gas fireplaces in contemporary design. It covers key technologies such as direct vent systems, frameless designs, natural heat release systems, and heat control innovations. Participants will recognize how to incorporate fireplaces as both functional heating solutions and architectural design elements. The course also reviews important safety features, including double-glass heat barriers, to ensure compliance with modern standards.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Solid surface is a popular material choice due to its beauty, durability, and ease of cleaning. Selecting a solid surface depends on the manufacturing process, the raw materials involved, and the material’s sustainability. This course examines solid surface as a decorative material, discusses its characteristics and attributes, and compares it with other hard surface materials

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In this video series course, we cover common metal roofing installation considerations. The first video discusses typical metal roof penetrations and details for proper installation. The second video presents metal enhancement options and design and installation tips to prevent premature corrosion in marine environments. The final video explores the expansion and contraction of standing seam metal roofs and how points of fixity accommodate thermal movement.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In today’s rapidly evolving world, safety is a critical factor in architectural design. This course examines how fenestration systems enhance building protection through bullet resistance, fortified glazing, and advanced barrier solutions. Learn how potential threats influence the selection of these systems and how they integrate seamlessly into architectural projects.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Birds are an important part of ecosystems, performing many essential ecological functions. Unfortunately, millions of birds are killed every year due to collisions. This course discusses how architects can include bird-safe glass design strategies in their projects to significantly reduce the number of bird collisions and positively impact the environment and biodiversity. It also examines how bird-safe glass may help projects satisfy credit requirements in the LEED® v5 Building Design and Construction rating system.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Rubber has been recycled for more than a century and used in recycled rubber flooring for over 65 years. Over this time, it has been proven to be a durable and flexible product that improves numerous aspects of the built environment while benefiting the natural environment. This course examines the sustainability attributes of recycled rubber flooring, how rubber is recycled, how it is used to make flooring, its health and safety benefits, and where to use and not use the product. The course also includes an overview of how recycled rubber flooring can be used to meet a number of USGBC’s LEED® v4 BD+C and WELL Building Standard® v2 credit requirements.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Solid surface material is a durable and sustainable solution for custom architectural solutions. Explore the extensive design possibilities of this nonporous, thermoformable material and review key performance characteristics and fabrication guidelines.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Lightweight, prefinished, and factory-fabricated insulated metal panels (IMPs) offer building owners a durable, cost-efficient, and easy-to-install roofing system that provides an air barrier, vapor barrier, and insulation all in one product. This course discusses the characteristics of IMPs and the installation process and explains why IMPs are ideally suited for pre-engineered and structural steel buildings. The role of IMPs in a building’s hygrothermal control layers and IMP code compliance are reviewed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Wood-plastic composite cladding offers a pleasing aesthetic and exceptional durability as part of a rainscreen assembly, enhancing the performance and longevity of the building envelope. Presented here are the functions and components of Lstiburek’s “perfect (universal) wall” design and a drained and ventilated rainscreen assembly. The course explores the composition, manufacture, benefits, design possibilities, and installation of wood-plastic composite cladding, as well as compliance with building codes and standards.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Specialty door and frame assemblies have been developed that are designed specifically for the built healthcare environment where performance criteria are critical. Reviewed in this course are specialty door and frame assemblies that meet the challenges of infection prevention, building cleanliness, patient privacy, and increased security, as well as containment of radio wave and radiation interference in hospitals and clinics.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Unfortunately, gun violence is a reality, and design strategies must be employed to ensure a suitable level of protection and safety. This course addresses bullet-resistant fiberglass composite panels and the need for architectural armoring. The course discusses ballistic material testing and standards, the types of ballistic materials available, and fiberglass composite panel applications and installation considerations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Precast concrete pavers and roof deck systems enable designers to deliver on aesthetics and design objectives while achieving safety and durability requirements. Patented roof deck systems allow for the creation of safe and stable roof deck patios and green roofs that maintain sustainability requirements. This course examines the raw materials used in these systems, reviews the different finishes available, and discusses different paver applications and their methods of installation.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course addresses the health, safety, and welfare concerns to account for when specifying and installing a modular masonry fireplace. The course discusses the advantages of modular masonry fireplace systems and their uses. When installing fireplaces, it is necessary to understand that safety codes, clearances, and restrictions are for the well-being of the installer as well as the homeowner. We cover these codes and regulations in this course.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Ground improvement refers to the application of geotechnical construction techniques to improve the performance of soils. These techniques are used when existing soils cannot provide satisfactory support of the planned structure. They improve the ground performance by increasing the strength and stiffness of the soil mass through densification, reinforcement, and/or cementing of soils. This course introduces ground improvement technologies and provides an in-depth review of aggregate piers and their design, installation, and benefits.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Growing and concentrating populations, shifting weather patterns, increasing frequency and ferocity of storm events, disappearing water supplies, and rising costs have made providing potable water and managing other water-related issues increasingly difficult for many communities. This course explores their many water issues and how they adapt their management practices to address constantly evolving water conditions.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    An ideal railing system enhances the appeal and value of a property and contributes to design as well as safety, while not requiring large amounts of time or money to maintain. This course presents an overview of railing system material options with a focus on aluminum and thermoplastic. The performance, design, and sustainability benefits of each material are discussed, along with mounting and aesthetic options. The course concludes with tips on selecting the right railing system for the project and case studies showcasing aluminum and thermoplastic railing system installations.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This presentation celebrates the value of incorporating artisanal, handcrafted fixtures and furnishings into a building’s design. Not only are these products unique, functional, and aesthetically appealing, but they can also establish a sense of connection with their maker. Many artisanal, handcrafted products are made using traditional techniques that have been passed down over time, often from generation to generation. And because many of these products are made from sustainable, recycled, or reclaimed materials that are locally available, they can help reduce the environmental impact of a new build. This course illustrates how sourcing artisan-made products for their projects can allow designers and builders to effect social, economic, and environmental change.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Accommodating an aging population in multistory homes means finding ways to simplify access to all levels. As residential elevators continue to decrease in cost, they are being considered as the most effective solution to offer safety, comfort, and convenience to the homeowner. This course reviews all considerations needed for the installation of a residential elevator including preplanning, locating, power and structural requirements, and code considerations.

    Ask a Question
    SAVE FOR LATER

Displaying 601 - 623 of 623 results.

FIRST PREV [501-525] [526-550] [551-575] [576-600] [601-623] LAST