Building Knowledge and Connections
Displaying 126 - 150 of 189 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/925265
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/1145493
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency.
https://redirect.aecdaily.com/s9525/www.aecdaily.com/course/946893
Due to their durability, low operational cost, and sustainability, metal roofs are gaining popularity in both commercial and residential markets. Owner expectations for this product family have increased as well and now include heightened aesthetics and long-term performance. While metal roofing systems are certainly up to these challenges, when they fail, the results are costly. Consequently, it is imperative designers have full knowledge of metal roof design and detailing. This course covers the top ten problems metal roof designers face and describes how these problems can be prevented through proper design.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787742
The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1035082
Precast concrete pavers and roof deck systems enable designers to deliver on aesthetics and design objectives while achieving safety and durability requirements. Patented roof deck systems allow for the creation of safe and stable roof deck patios and green roofs that maintain sustainability requirements. This course examines the raw materials used in these systems, reviews the different finishes available, and discusses different paver applications and their methods of installation.
https://redirect.aecdaily.com/s1200670/www.aecdaily.com/course/1210640
Rain control is a critical aspect of building envelope construction, affecting a building’s structural integrity and occupant health. This course presents the rainscreen wall system as an effective strategy for moisture management, as reflected in the WELL Building Standard™ version 2. Discussed are the fundamentals of moisture control in buildings, the history of rainscreens, rainscreen design principles, and cladding material selection, including potential contributions to credit achievement in the LEED® v5 Building Design and Construction (BD+C) rating system.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787410
A sound building envelope should be sustainable and provide fire resistance, good thermal performance, and protection from the elements. Mineral wool, fire rated insulated metal panels (IMPs) can improve building performance and contribute to a sustainable design strategy. Included in this course are discussions on mineral wool IMP characteristics and design options, performance advantages, and installation considerations. The course details how fire resistance is specified in the International Building Code and provides examples of fire wall and fire partition construction assemblies.
https://redirect.aecdaily.com/s806330/www.aecdaily.com/course/827398
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings.
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
https://redirect.aecdaily.com/s4732/www.aecdaily.com/course/927259
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/973831
In the fight against climate change, efforts intensify against the planet’s number one enemy—carbon dioxide. The building industry will play a significant role in these efforts. Embodied carbon—the global greenhouse gas emissions generated from sourcing raw material and processing, manufacturing, transporting, and installing building materials—will be the target over the next decade. This course will define embodied carbon, its impact on greenhouse gas emissions, the construction industry's impact, and the methods and tools that building designers can employ to limit embodied carbon.
https://redirect.aecdaily.com/s12394/www.aecdaily.com/course/1179979
The performance and durability of a roof are critical to the health, welfare, and safety of both building occupants and the building itself. This course examines the construction, materials, and best detailing practices that ensure the proper long-term performance of steep-pitch roofs. It describes and details layout options for assemblies of steep-pitch roofs and the key characteristics of roofing systems that help to prevent roof deterioration and damage. It then highlights best practices in detailing and constructing steep-pitch roof systems that mitigate water, ice, snow, fire, or wind damage to the roof.
https://redirect.aecdaily.com/s1036619/www.aecdaily.com/course/1065768
Bamboo is a versatile building material that brings warmth and character to indoor applications such as flooring, furniture, and wall and ceiling panels; an innovative process also allows bamboo to be used outdoors in decks, soffits, and siding. This course reviews the material technologies that make bamboo products with reduced environmental impacts and better performance than traditional materials and discusses their potential to meet requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s19165/www.aecdaily.com/course/999164
At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region.
https://redirect.aecdaily.com/s20276/www.aecdaily.com/course/957452
Architectural metal fabric is a dynamic interior and exterior material used to create beautiful and functional façades, balustrades, and screening for a wide variety of commercial and public structures. This course discusses applications for metal fabric and its performance benefits, including safety, security, solar management, and sustainability. It also discusses how coatings and graphics technologies can be incorporated into metal fabrics to enhance branding and visual identity.
https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/1143565
Often the largest access point in a building, sectional door systems play a significant role in controlling energy costs and supporting sustainable design in residential and commercial buildings. This course explores the specification considerations and the different types of sectional garage doors, as well as their role in enhancing the thermal performance of homes and commercial buildings.
https://redirect.aecdaily.com/s1175601/www.aecdaily.com/course/1224305
Maximizing natural daylight inside buildings boosts occupant health and well-being and reduces reliance on electric lighting, but the challenge is to maintain a comfortable environment free from glare and heat buildup. This course explores exterior fabric shading solutions that can reduce solar heat gain, maintain privacy and views, and contribute toward energy savings, daylighting, and shading goals in the WELL Building Standard™ v2, the Sustainable SITES Initiative® v2, and the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems. Awnings and screens combining minimalist design with innovative technology are reviewed, along with the myriad customization options to meet functional and aesthetic goals across a range of project types.
https://redirect.aecdaily.com/s692617/www.aecdaily.com/course/869237
In order to address tile installation difficulties effectively and avoid failures, designers and specifiers must maintain full awareness of current knowledge, practices, and products. This course reviews potentially problematic contemporary tile installation issues along with the industry guidance, methodologies, and products available to address them.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/917631
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology.
https://redirect.aecdaily.com/s8170/www.aecdaily.com/course/1200510
This course examines the material composition, reinforcement types, and testing standards associated with styrene-butadiene-styrene (SBS) modified bitumen membranes. It explains how fiberglass, polyester, and combination reinforcements affect membrane strength, flexibility, and dimensional stability. The standards that establish testing methods for tensile strength, elongation, and long-term performance are covered in detail. The course also outlines how material selection and installation practices influence roof durability, moisture resistance, and occupant safety.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/890369
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes.
https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/1209439
This course introduces expanded polystyrene (EPS) underslab insulation and examines its role in energy performance, moisture management, thermal control, vapor management, radon mitigation, and hydronic heating in residential and commercial buildings. The course supports project teams working toward LEED® v5 Building Design and Construction (BD+C) or Interior Design and Construction (ID+C) requirements by outlining how underslab insulation decisions influence compliance with thermal envelope provisions, energy modeling pathways, and material considerations within the rating systems.
https://redirect.aecdaily.com/s1075056/www.aecdaily.com/course/1228114
This course examines the fundamentals of building envelope design, with a particular focus on fastener penetrations through water, air, and thermal control layers and their effect on overall performance. It explores various attachment solutions, including tube-seal fasteners, that reduce thermal bridging and support the continuity of the air- and weather-resistive barrier (AWRB) and exterior insulation, contributing to LEED® v5 Building Design and Construction and WELL Building Standard™ v2 goals. The course also reviews testing procedures for evaluating moisture penetration and fire resilience and demonstrates how selecting assemblies through a systematic approach can improve design efficiency while reducing errors and omissions. Throughout the course, a mass timber structure serves as a case study to illustrate best practices in building envelope detailing.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1056832
Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.
https://redirect.aecdaily.com/s19863/www.aecdaily.com/course/1077571
Firestopping is the process of sealing openings around penetrants or in joints or gaps between fire-rated assemblies to restore hourly fire resistance ratings. It is a critical part of fire containment and a balanced fire and life safety plan. This course outlines resources and code requirements that architects and designers should be aware of while preparing specifications for firestop systems in their projects. The course also reviews common mistakes to avoid.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.