Building Knowledge and Connections
Displaying 1 - 25 of 80 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s522670/www.aecdaily.com/course/992394
Building systems can be enhanced by incorporating reflective insulation or radiant barriers into the building envelope. With effective insulation, heat transfer is reduced, resulting in less summer heat gain, and less winter heat loss. This course explains common and effective uses for reflective insulation and radiant barriers in a wide range of construction and building applications and demonstrates how these systems reduce energy usage, increase the lifespan of the mechanical equipment for heating and cooling, and reduce maintenance requirements and frequency of replacement.
https://redirect.aecdaily.com/s731654/www.aecdaily.com/course/1195223
Contrast therapy, the controlled use of heat and cold, has supported health, recovery, and wellness practices for centuries. This course examines the science, design, and construction of modern contrast therapy environments, including saunas, steam rooms, and cold rooms. It explains how temperature control, material specification, and system design influence safety, hygiene, and performance. The course also addresses how prefabricated systems improve installation efficiency, durability, and indoor environmental quality.
https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759
Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/965465
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. Now, in the wake of implementing pandemic protocols, our acoustic comfort in these spaces is greatly challenged. This course examines the impacts of poor soundscapes in educational facilities and introduces innovative solutions for improving acoustics in these areas while keeping us comfortable and safe from exposure to emerging viruses.
https://redirect.aecdaily.com/s879124/www.aecdaily.com/course/912416
Movable pool and spa floor technology enables an entirely flexible, multifunctional living and recreational space to complement any architectural vision. Presented here are types of movable pool floors, pool floor technology, options and amenities, and safety and sustainability performance considerations.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/965090
Today’s buildings are evolving from independently functioning structures to intelligent buildings that interact with occupants and surrounding buildings. This trend has impacted the design, operation, and maintenance of data centers around the globe due to the increased demand for data and digital communication and has resulted in more high-performance data centers. This presentation addresses the specific needs of data centers and presents high-performance design solutions that support sustainable design.
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/893839
Quartz surfacing is a man-made material consisting of up to 93% natural quartz crystal. In this course, you will discover the other components behind the beauty, durability, and flexibility of this surfacing material. You will see the composition, production, and quality assurance processes that go into making the material and the resultant attributes and capabilities, as well as the installation basics of quartz surfacing materials.
https://redirect.aecdaily.com/s1359/www.aecdaily.com/course/881285
Gate and fencing systems can be both functional and decorative. This course illustrates how architectural gate and fencing systems can be designed to meet modern security and design requirements while harmonizing with their surrounding environment. Fencing and gate systems are discussed in terms of their composition, materials, coatings, finishes, and performance in interior and exterior applications.
https://redirect.aecdaily.com/s390027/www.aecdaily.com/course/1148959
The strength, versatility, local availability, and ease of use of concrete help make it the most consumed manufactured substance in the world. Concrete also offers sustainability and resilience benefits: a long lifespan, low maintenance needs, durability against natural disasters, high-albedo surfaces, smoother and stiffer pavement, carbon sequestration capabilities, and increased building energy efficiency. This course describes some of the new technologies that continue to evolve to produce concrete with the same performance and benefits as traditional concrete but with a lower carbon footprint. Also discussed is how to specify low-carbon concrete using EPDs, a carbon budget, and performance-based specifications and how it can contribute to the Building Design and Construction rating systems of LEED® v4.1 and the upcoming LEED v5.
https://redirect.aecdaily.com/s746194/www.aecdaily.com/course/892298
Today, architects and designers need to give special consideration to building acoustics when developing plans for new and newly renovated construction projects. Excessive noise in any environment is considered a serious problem that can negatively impact occupant comfort, leading to learning difficulties, sleep deprivation, delayed recovery from illness, and lack of privacy. Sound basics are discussed in this course, and STC, IIC, and sound attenuation (reduction) techniques are explained. Various case studies are examined to develop further understanding of the performance of common sound abatement assemblies that are essential for occupant well-being and comfort.
https://redirect.aecdaily.com/s753464/www.aecdaily.com/course/844146
With the ever-increasing focus on the sustainable built environment, building owners, architects, engineers, and contractors are incorporating structural steel into their designs. Presented here is a comprehensive view of the cradle-to-cradle structural steel supply chain from a sustainability perspective. Also discussed are steel production and design, steel’s potential contribution to LEED v4 credits, thermal capacity, and the environmental and life cycle benefits of prefabricated fireproof steel columns.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1045296
The operation of mechanical equipment generates vibration and noise, which, if left untreated, can damage the building structure and the equipment itself and be a source of discomfort for building occupants. This course examines HVAC equipment vibration and the specification of isolation solutions. It provides discussions on each of the ASHRAE isolator and base types and describes some acoustical floor treatments.
https://redirect.aecdaily.com/s480282/www.aecdaily.com/course/970413
As interest in cross-laminated timber (CLT) buildings grows, the market for building enclosure products as a whole has yet to fully provide the water-resistant barriers, vapor retarders, and air barriers to optimally support the unique characteristics of wood. Furthermore, there are few building enclosure design guides specific to detailing wood-framed walls and roofs. This comprehensive course fills the gaps, providing detailed information on mass timber, building enclosure issues, the vapor-permeable technology available to address wood’s unique moisture characteristics, and a how-to guide on detailing the walls and roof of the enclosure.
https://redirect.aecdaily.com/s1048457/www.aecdaily.com/course/1058538
Identify key fenestration design criteria that will fortify buildings against ballistic, blast, forced entry, and environmental threats.
https://redirect.aecdaily.com/s1078631/www.aecdaily.com/course/1094744
In recent years, the inclusion of wine cellars has become a hallmark of luxury and upscale housing, extending beyond individual homes to multifamily residences, bars, private clubs, and restaurants. This course is a practical guide for architects, designers, general contractors, and engineers on building attractive, efficient, and highly functioning wine cellars that successfully integrate technical requirements with design intent.
https://redirect.aecdaily.com/s9559/www.aecdaily.com/course/860652
Perforated Metal, Expanded Metal, and Wire Mesh combine aesthetics, durability, and functionality. Although each product is distinct with unique characteristics, they have similar properties that provide light and sound diffusion, security, strength, and durability. This course provides a review of the characteristics and architectural applications of these products, the different materials in them, and how they achieve a safe work environment.
https://redirect.aecdaily.com/s4479/www.aecdaily.com/course/930671
Considering gate hardware early in the design process enhances the aesthetics and functionality of perimeter security. Gate hardware balances durability, security, and ease-of-use without detracting from the design. This course examines latches, plain pivot and self-closing hinges, closers and accessories for swing gates, and wheels for sliding gates; it also offers guidance on specification and installation.
https://redirect.aecdaily.com/s18206/www.aecdaily.com/course/920731
Curved elements, such as walls, ceilings, columns, soffits, light covers, clouds, and arches have often been used to add interest to architectural designs. This course outlines conventional methods of framing curves in wood and steel, as well as new methods of framing using flexible track systems. Discussions include options for wall coverings and trims for curved surfaces.
https://redirect.aecdaily.com/s923870/www.aecdaily.com/course/1075582
The parking component of a development is typically considered a “necessity,” but have you considered how much the first and last impressions count? This course shows how automated technology turns parking into an all-around winning proposition through increased ROI, unsurpassed safety for drivers and vehicles, sustainable design with a drastically reduced environmental footprint, and a premium valet experience.
https://redirect.aecdaily.com/s7934/www.aecdaily.com/course/945391
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/959390
Sound control is a critical element in a building’s design. We all think of the walls, ceiling, and floor when discussing sound attenuation, but without the proper acoustic door, the sound-control goals in an acoustic plan may not be met. This course reviews healthy sound levels and how to test and identify target STC ratings. Also discussed are the elements of acoustic door assemblies and how they address fire ratings and ADA compliance, contribute to LEED® certification and green building, and provide security for classified files and electronic data.
https://redirect.aecdaily.com/s448592/www.aecdaily.com/course/1190316
In this course, we will explore the features and outdoor applications of elevated deck systems that enable architects to optimize outdoor spaces with functionality, sustainability, and aesthetic appeal, creating attractive and safe spaces for occupants. This course covers the system components for practical applications in various settings, offering insights into proprietary pedestal systems.
https://redirect.aecdaily.com/s890910/www.aecdaily.com/course/959066
Hidden access covers blend utility access covers with the surface continuity of streetscape, hardscape, and landscape designs. This course reviews the functions, product types, and specification and installation considerations of hidden access cover solutions.
https://redirect.aecdaily.com/s727499/www.aecdaily.com/course/852694
Green facades can contribute to building energy efficiency, durability, aesthetic value, sustainability, and cost effectiveness in the performance of ecological system services. This course examines the considerations required for successful green facade installations and includes discussions on system selection, design, plant selection, maintenance, and client/owner education.
https://redirect.aecdaily.com/s14798/www.aecdaily.com/course/1047615
Properly selected acoustical solutions are necessary to provide acoustical comfort and performance for a range of applications. This course reviews acoustic theory and design methodology to facilitate the design and specification process. A particular emphasis is placed on performance-oriented designs and strategies for different project types.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
