Building Knowledge and Connections
This page is deprecated. You are probably looking for the Latest Releases page.
Displaying 151 - 175 of 669 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1123415
New building materials don’t come around very often, and in some cases, an early high-profile stumble can shape perceptions of an otherwise valuable technology. Learning from those mistakes, however, is a fundamental element of driving technical innovation, and real, robust solutions to known issues can ultimately produce the highest level of performance. Magnesium oxide-based composite panels have been used as exterior wall sheathing for several decades due to a number of highly desirable properties, including resistance to fire, dimensional stability, high strength, and other attributes. Early iterations of boards were found to have issues related to moisture and chemical stability, leading to premature failure of the building façade but also teaching the industry specific factors that needed to be improved in future generations of board. Now, as a maturing product category, the enabling technology of how to make consistent, high-quality boards is well known, even if not universally practiced. In this...
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155220
Engineering analysis is a necessary tool to provide fire protection and safety for our buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevent the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost for larger-scale tests such as NFPA 285. Qualified fire engineering teams, in partnership with third-party labs and product manufacturers, offer the opportunity to extend successful test results beyond the tested specimen through an engineering analysis report. This presentation discusses the opportunities, challenges, and limitations present when considering the acceptance of test data extended to support substitution or modification to an assembly.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1155231
From pitched to low-slope roofing, a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and protected membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end uses. Roofs can be low or high albedo to impact solar gain; add to this vegetative roof assemblies (green roofs), roofs with solar arrays, and blue roofs (stormwater management), and no two roofs are alike. Join us to review the modern roof taxonomies and associated benefits and drawbacks, learn about the latest options in roof construction, and reflect on performance differences.
https://redirect.aecdaily.com/s1036619/www.aecdaily.com/course/1065768
Bamboo is a versatile building material that brings warmth and character to indoor applications such as flooring, furniture, and wall and ceiling panels; an innovative process also allows bamboo to be used outdoors in decks, soffits, and siding. This course reviews the material technologies that make bamboo products with reduced environmental impacts and better performance than traditional materials and discusses their potential to meet requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s1059942/www.aecdaily.com/course/1073612
Firestopping is more than installing sealant in an opening. It is a critical component of a building’s overall life-safety system. This course discusses how a properly installed firestop system not only protects property but, more importantly, also saves lives by inhibiting the spread of fire from compartment to compartment and buying valuable time for occupants to exit the structure in the event of a catastrophic fire.
https://redirect.aecdaily.com/s1063446/www.aecdaily.com/course/1235478
L’éclairage est l’un des éléments les plus importants de l’environnement intérieur, dont les effets sur le corps, l’esprit et le bien-être de l’être humain sont considérables. Pour les architectes, il est essentiel de concevoir des espaces privilégiant la lumière naturelle afin de favoriser le confort, la productivité et le bien-être. Cette formation explore les bienfaits des conduits de lumière naturelle pour la santé et le bien-être, ainsi que leur rôle dans la création d’environnements intérieurs plus sains et plus durables. La formation se termine par une analyse de plusieurs études de cas.
https://redirect.aecdaily.com/s1112864/www.aecdaily.com/course/1132333
Modular wall systems provide a versatile and customizable approach to biophilic design, seamlessly integrating with existing infrastructure and adapting to evolving requirements. This course delves into their benefits, features, specification and installation considerations, and applications encompassing various environments, from urban streetscapes and public parks to commercial spaces, rooftops, and residential areas.
https://redirect.aecdaily.com/s1157850/www.aecdaily.com/course/1177307
Fire doors have one mission: to compartmentalize a building to contain a fire. Choosing the right one for your application requires understanding the various types of doors and how they function. This course provides an overview of rolling steel fire doors, covering their components, design, mounting methods, and considerations for specification and installation.
https://redirect.aecdaily.com/s1157850/www.aecdaily.com/course/1177647
Choosing the best rolling door or commercial sectional door solution for an application can be challenging, so understanding the benefits of each type of door is essential to ensure the correct product is specified. This course covers the components, installation requirements, optional safety features, and design options for both types of doors.
https://redirect.aecdaily.com/s1214441/www.aecdaily.com/course/1237638
This course explores how the Americans with Disabilities Act (ADA) and accessibility standards apply to drinking fountains and bottle-filling stations. Participants review key technical requirements, including high/low configurations, clear floor space, approach, knee and toe clearance, spout height, operable parts, and protrusion requirements and examine their relationship to building and plumbing codes. The course also addresses outdoor installations and the sustainability benefits of hydration stations, providing a framework for accessible, compliant, and inclusive design while highlighting considerations relevant to LEED® v5 Building Design and Construction and Interior Design and Construction, the WELL™ Building Standard v2, and SITES® v2.
https://redirect.aecdaily.com/s1228187/www.aecdaily.com/course/1241002
As the building industry works toward net-zero-carbon goals, the carbon impacts of enclosure materials and assemblies are increasingly important. This course examines embodied and operational carbon and explains how life-cycle assessments (LCAs) and environmental product declarations (EPDs) are used to evaluate environmental impact. Participants explore how insulation type, thermal performance, and assembly design influence the total carbon footprint and how full-assembly life-cycle assessment provides a more meaningful measure of carbon impact than comparing individual products. Through full-assembly comparisons, climate zone considerations, a real-world case study, and specification guidance, participants gain strategies for designing and specifying lower-carbon building enclosures.
https://redirect.aecdaily.com/s1043551/www.aecdaily.com/course/1061942
Direct vent fireplaces are safe and efficient supplemental heat sources in today’s homes. This course reviews the innovative design options for gas fireplaces, including media options, cool wall technology, and safety barriers. Direct and power vent heat delivery systems are discussed, and the impact of standing versus electric pilot lights on energy efficiency is examined.
https://redirect.aecdaily.com/s1043551/www.aecdaily.com/course/1065168
The fireplace has always been a focal point in any home, providing warmth and a place for friends and family to gather. Today’s wood-burning fireplaces, inserts, and stoves have become increasingly efficient and clean burning. This course examines using wood as a fuel source and discusses the many characteristics that can affect heat production, efficiency, and burn time. New burning technologies that meet EPA certification requirements for released particulate matter are summarized, as are design and installation specifications.
https://redirect.aecdaily.com/s1190354/www.aecdaily.com/course/1199549
The look of wood adds warmth and aesthetic appeal to building designs that other materials, such as masonry, metals, and glass, cannot replicate. However, since natural wood may not be suitable for Class 1–3 commercial projects, innovative composite and synthetic materials have been developed to overcome the limitations of real wood. This course provides a comprehensive examination of eight wood-inspired design technologies that mimic the appearance of natural wood while meeting fire performance standards. The role of wood-plastic composite (WPC) hybrid products in fulfilling the requirements of the LEED® v5 Building Design and Construction (BD+C) rating system is also reviewed.
https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/1236836
This course introduces architects and specifiers to the fundamentals of radio-frequency (RF) shielding in building design, with a focus on hybrid-performance doors that provide both acoustic and RF attenuation for sensitive environments. Topics include applicable government standards, key applications, system components, and installation and testing considerations to support the effective specification of hybrid-performance doors for applications with stringent acoustic and RF shielding requirements.
https://redirect.aecdaily.com/s1203/www.aecdaily.com/course/1185008
Terracotta rainscreen cladding systems enhance building envelope performance through improved moisture management, reflected in the WELL Building Standard™ version 2, as well as through energy efficiency, structural integrity, and durability. The course examines the manufacturing of terracotta cladding, highlighting responsible clay sourcing and postextraction site reclamation, and discusses performance, aesthetics, and sustainability benefits, including how terracotta cladding can contribute to meeting the requirements of LEED® v5 Building Design and Construction (BD+C): New Construction. Additional topics include system color, layout, and wall assembly options, best installation practices, and industry standards and tests.
https://redirect.aecdaily.com/s1773/www.aecdaily.com/course/858685
The use of life safety dampers is driven by requirements in various building codes. There are many different applications for which fire, fire/smoke, smoke, and/or ceiling radiation dampers can be used, each having its own specific purpose and unique installation requirements. This course gives an in-depth look at the different types of dampers and explains how and where they're each used and installed.
https://redirect.aecdaily.com/s1773/www.aecdaily.com/course/880606
Air control dampers are an essential component of a building’s HVAC system, regulating heating, cooling, and ventilation performance. Presented here is an introduction to control, balancing, backdraft, industrial, and multizone dampers; each type plays an important role in the HVAC system. Discussed are damper types, components, and performance metrics. Guidance is provided for damper specification, installation, maintenance, and inspection.
https://redirect.aecdaily.com/s1773/www.aecdaily.com/course/988588
Louvers are an essential part of every HVAC system, facilitating appropriate airflow and inhibiting unwanted penetration by water, snow, or debris through wall openings and into HVAC ductwork. However, they can have other purposes. Their simple design makes them a versatile addition and a unique style option to any project. This course presents the types, components, and applications of louvers, along with the primary specification considerations when selecting a louver solution.
https://redirect.aecdaily.com/s4860/www.aecdaily.com/course/1108432
Stucco is a popular and durable finishing material that offers many benefits, combining safety and affordability while satisfying aesthetic needs. It can be applied to various surfaces using a lath system, which provides support for stucco. However, the quality of the stucco lath embedment can greatly affect its performance. This course covers the proper technique for achieving lath embedment, the different types of metal lath and their various applications, and regional material preferences.
https://redirect.aecdaily.com/s4877/www.aecdaily.com/course/1237866
Fireplaces remain one of the most desirable household features for homeowners, complementing different lifestyles and appealing to a range of demographics. This course provides an overview of electric fireplaces, focusing on their design possibilities, flame technologies, ease of installation, environmental efficiency, cost-saving benefits, and advantages over gas and wood-burning fireplaces.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/853451
Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856363
Standing seam metal roofing has been used successfully in the United States for centuries, and proper specification is key to realizing its intended performance. Examined here are: the factors driving the demand for standing seam metal roof and wall systems; standing seam panel basics; gauge and grade; oil canning; specification considerations; testing standards; and forming, delivery, storage, handling and warranty.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/856360
With the advent of “cool” single-ply roofs featuring heat-reflective exterior surfaces and the use of mechanical attachment, new questions have emerged concerning the internal forces at play within the roofing system, especially in regard to vapor movement and the potential for moisture condensation within the roof. This course reviews the fundamentals of vapor movement in roofing systems, current roof condensation research and the tools available to assess roof condensation. It also provides the building design professional with strategies to deal effectively with moisture movement within the roofing system.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
