International Institute of Building Enclosure Consultants
International Institute of Building Enclosure Consultants - https://redirect.aecdaily.com/s18122/www.iibec.org
Displaying 26 - 50 of 109 results.
FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-109] NEXT LAST SHOW ALL
Protected membrane roof (PMR) systems offer many benefits to building owners and provide architects with design options that can maximize the energy efficiency, durability, and performance of a building envelope. This course compares the functional and physical features of PMR systems to conventional low-slope roofing applications and discusses the standard ASCE 7 and its impact on wind uplift design.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/874855
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines).
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/881135
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A rooftop solar photovoltaic system offers myriad benefits to both building owners and the environment; to maximize the benefits, however, it is important to be aware of the potential causes and effects of problems with rooftop installations. This course presents the issues to consider to prevent damaging the roof, voiding the roofing warranty, and incurring additional costs. Solar system mounting options are explored in terms of how they can help eliminate concerns around rooftop installations.
https://redirect.aecdaily.com/s13011/www.aecdaily.com/course/797126
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Finding ways to improve the energy efficiency of buildings is a key focus of many codes organizations, designers, architects, and government groups. This course examines how the roof of a building—one of the few parts of a building envelope that undergoes periodic replacement—impacts energy efficiency. It also explores how roof design can be a key contributor to meeting both sustainability and energy operating cost goals.
https://redirect.aecdaily.com/s6300/www.aecdaily.com/course/794005
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Recycled rubber flooring is an environmentally responsible material that outlasts many types of traditional commercial flooring products when exposed to normal foot traffic stress. Interior and exterior recycled rubber surfacing products are explored in terms of their sustainable design benefits and applications. The program includes discussions on rubber manufacturing, postconsumer tires, and green building certification systems.
https://redirect.aecdaily.com/s17445/www.aecdaily.com/course/540937
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Comprehensive site security design should balance managing traffic flow and preventing vehicular intrusion with enhancing the existing character of the site. This course presents FEMA’s guidance on risk assessment and layers of defense, vehicle impact test standards, bollard types, the precast concrete manufacturing process, barrier system design considerations, and incorporating precast concrete bollards and site furnishings into perimeter security design.
https://redirect.aecdaily.com/s987165/www.aecdaily.com/course/1056048
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Thermoplastic single-ply roofing systems have over a half century of proven performance. This course outlines their history and the various types of membranes that have been developed and identifies the individual attributes and benefits of each type. This highly illustrated course also discusses the cooling benefits of white and green roofs, the numerous single-ply attachment and warranty options, and descriptions of sample installations.
https://redirect.aecdaily.com/s936444/www.aecdaily.com/course/947818
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Polyvinyl chloride (PVC) has been used in North America as a single-ply roof membrane for more than 40 years. Because of the longevity of PVC and its history of performance, PVC roofs have a lower roof replacement rate compared to other single-ply membranes. This course discusses how PVC is manufactured, its features and benefits, and comparisons between its performance and that of other thermoplastic single-ply membranes.
https://redirect.aecdaily.com/s352517/www.aecdaily.com/course/953073
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In applications where wood may be exposed to moisture, insects, or fungal organisms, preservative-treated wood can ensure a project’s durability. This course reviews: the manufacturing process for pressure-treated wood; types of preservative treatments and the required levels of retention as dictated by the end-use application, desired service life, and exposure conditions; American Wood Protection Association (AWPA) Use Category standards; current issues concerning preserved wood in residential and commercial construction; and Best Management Practices (BMPs) for aquatic uses.
https://redirect.aecdaily.com/s775747/www.aecdaily.com/course/794696
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Various control strategies are used to prevent rain from penetrating a building envelope and entering a building assembly. This course compares exterior wall metal cladding systems and takes an in-depth look at the design options, testing, specifications, environmental implications, and the detailing of single-skin metal panel systems as used in a pressure-equalized rainscreen (PER) application.
https://redirect.aecdaily.com/s681831/www.aecdaily.com/course/870548
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Identify key fenestration design criteria that will fortify buildings against ballistic, blast, forced entry, and environmental threats.
https://redirect.aecdaily.com/s1048457/www.aecdaily.com/course/1058538
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Assesses the urban environmental issues of stormwater runoff and heat islands and describes how their damaging impacts can be mitigated by blue, white, and green roofs. The considerations and additional benefits of each roof type are also discussed.
https://redirect.aecdaily.com/s661094/www.aecdaily.com/course/686311
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Rainscreen systems are designed to prevent moisture from infiltrating walls and weakening their structural integrity. Multicomponent backup wall systems have traditionally been used for commercial projects but have drawbacks ranging from creating plenty of waste to producing design challenges. The alternative of insulated metal panel barrier wall systems offers many advantages that are discussed in this course, including economic and environmental benefits, easier installation, and a fresh, modern look.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/950624
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The durability of a home is affected by how well it is protected from moisture. This course reviews the methods of preventing and managing moisture in walls, the installation considerations of moisture management products, and the required tests and acceptance criteria for water-resistive barriers.
https://redirect.aecdaily.com/s18665/www.aecdaily.com/course/931898
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Due to advancements in architectural decorative glass technology, the number of design options available to help designers and architects achieve the specific aesthetics and performance requirements they desire has dramatically increased. This course provides a review of architectural decorative glass including product options, applications, features, and specification considerations. Also discussed is how decorative glass can contribute to sustainable design and LEED® initiatives.
https://redirect.aecdaily.com/s661112/www.aecdaily.com/course/880724
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Animals, plants, and microbes are engineers of what works and lasts on earth. Biomimicry is a practice in which nature’s designs, patterns, and strategies are examined to find sustainable solutions to our technical and design problems. This course discusses how applying the concepts of biomimicry can better connect our designs and buildings with nature and examines the relationship between nature’s solutions to light, heat, glare control, and shading design principles.
https://redirect.aecdaily.com/s584379/www.aecdaily.com/course/622057
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/895029
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Building science experts have acknowledged the need for both drainage and ventilation in exterior wall systems in order to eliminate moisture issues and extend the life of buildings. This presentation reviews the concepts of rainscreen technology and the solutions for compliance with a focus on engineered rainscreen drainage and ventilation mats used in direct-applied and ventilated wall designs.
Prerequisites: No
Course Level: Introductory
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/980729
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/961744
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Beyond aesthetics, ventilated façades and cladding systems provide added wind load absorption, moisture protection, and insulation properties, resulting in prolonged building durability and sustainability. This course examines how these systems benefit occupant well-being by mitigating exterior noise transmission, offer significant building operating energy savings from decreased HVAC demands, and increase occupant comfort by regulating interior temperatures. Mechanical and chemical adhesive attachment is also examined, focusing on the adhesive’s ability to absorb wind-induced vibration as well as expansion and contraction from temperature and humidity changes. Several case studies are also discussed.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1048719
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
All decking products designed for exterior use and under constant exposure to the elements will eventually show some signs of degradation; however, vinyl decking can be used to prolong the life cycle of various building products. This course examines walkable roof deck membranes and roofing systems and includes discussions on system characteristics, design considerations, and how to properly specify roof deck membrane systems. This program will be beneficial to architects, specifiers, and contractors involved in single- and multiple-family home construction.
https://redirect.aecdaily.com/s431285/www.aecdaily.com/course/878487
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Insulated metal wall panels (IMPs) offer a sleek, modern, and light-weight envelope system that is highly customizable. This course explores the characteristics of IMPs, including how they can offer a five-in-one design solution that provides the exterior finish, as well as the air, vapor, water, and thermal control layers. Discussions will also include design options, installation processes, code compliance, sustainability, and available warranties.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/834059
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The inherent properties of concrete masonry, including strength, durability, and fire safety, have been well documented, though a perception of high cost persists. Due to significant changes to codes and standards that increased the flexibility of concrete masonry structural design, this construction method may also offer cost-effective and energy-efficient alternative solutions. This course reviews changes to ASTM C90 and the masonry design standard and includes a discussion on the benefits and opportunities these requirements bring.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1009125
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
