International Institute of Building Enclosure Consultants
International Institute of Building Enclosure Consultants - https://redirect.aecdaily.com/s18122/www.iibec.org
Displaying 76 - 100 of 109 results.
FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-109] NEXT LAST SHOW ALL
Roofing is one of the most common renovation projects on commercial buildings. Upgrading a roof assembly to meet current building standards provides an opportunity to save energy and maintain the necessary fire and structural performance. This course reviews the code requirements for commercial reroofing and discusses how reroofing can improve a building’s energy efficiency.
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/1002626
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is one of the most widely used building materials throughout the world, and as such, it is in everyone’s best interest to consider more sustainable options. This course provides an overview of the properties of slag cement. Discussion topics include benefits, effects on plastics and hardened concrete, environmental profile including life cycle analysis (LCA) and environmental product declarations (EPDs), and various slag cement applications.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/852630
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®).
https://redirect.aecdaily.com/s1041685/www.aecdaily.com/course/1048034
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Although built-up roofs are the oldest type of low-slope roofing systems, gaining an understanding of the advantages and characteristics of modified bitumen membranes will help you select the asphalt roofing system that improves performance and saves on installation costs over traditional asphalt roofs. Learn how “mod bit” roofs, whether APP or SBS, provide improved durability with stronger reinforcements, resist hail and traffic damage, and provide factory-controlled quality manufacturing.
https://redirect.aecdaily.com/s5939/www.aecdaily.com/course/668872
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Incorporating bulletproof glass into any facility is a sizable investment; however, it is a small price to pay for the protection of human lives. This course illustrates how to maximize that investment by selecting and installing the appropriate system for the threat level and the functional needs of the client. Discussed are UL protection level ratings; types of bullet-resistant barrier systems and their components; planning, production, and installation of systems; security window film vs. bullet-resistant glass; and project security checklists.
https://redirect.aecdaily.com/s455170/www.aecdaily.com/course/847332
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF.
https://redirect.aecdaily.com/s356556/www.aecdaily.com/course/1054861
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course aims to educate learners about the chemistry of spray-applied polyurethane foam (SPF), its various applications in the construction industry, safe handling and installation, and its contribution to sustainable design. The advantages of using SPF are highlighted in terms of its benefits to energy conservation and fire safety. Its role as a high-performance air barrier that satisfies code and LEED® criteria and complies with various standards is also discussed.
https://redirect.aecdaily.com/s356556/www.aecdaily.com/course/1003714
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Specifiers, owners and installers of commercial roofing systems face unprecedented obstacles in today’s business environment. Shortages and disruptions in the supply chain combined with a shrinking labor force have created uncertainty, inflation and scheduling challenges for all projects. Despite these adverse conditions, opportunities exist to reevaluate and choose roofing materials and installation methods for successful project fulfillment within predictable time frames, allowing for the installation of a safe and energy-efficient roofing system on time.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/1028359
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Fenestration openings are a critical component of a building envelope, especially in present-day sustainable, energy-efficient buildings. Building envelopes play an important role in controlling the movement of heat, bulk water, and water vapor. Designing fenestration openings for buildings that use continuous exterior insulation has a significant role in reducing thermal bridging and thus conserving energy. This course reviews the impact of exterior insulation on fenestration installation design. The course also explores solutions for a wide variety of wall system variations.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/947826
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability.
https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/853451
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/969021
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Building science experts acknowledge the need for drainage in both vertical and horizontal applications in order to eliminate moisture issues and extend the life of the building. This course examines foundation wall, green roof, and plaza deck applications and discusses the factors that impact drainage, including soil permeability, saturation, land cover, and loading. Flow rate standards are discussed, and drainage composite mat installation is explained.
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/992134
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Masonry wall types have evolved from self-supporting mass walls to cavity walls and veneers that require wall ties or anchors. Over time, anchors can fail and masonry wall systems can become unstable and require repair. This course discusses how to recognize unstable façades, how retrofit anchors can be used to repair these instabilities, the different types of anchors available, and how to determine the proper repair procedure.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1012800
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.
https://redirect.aecdaily.com/s1021711/www.aecdaily.com/course/1044026
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Wood is both beautiful and practical but lacks long-term durability when used outdoors. Acetylation changes the material properties of the wood at the molecular level to improve its stability and weathering capabilities. This course reviews the acetylation process, its impact on wood performance, and how and where this type of wood can be used. Also discussed are the green features of acetylated wood and how it can contribute toward earning points in the LEED® v4 green building rating system.
https://redirect.aecdaily.com/s445448/www.aecdaily.com/course/1044818
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Architectural insulated metal panels (IMPs) are an increasingly popular choice for building developers and architects, presenting a compelling solution that combines functionality, efficiency, and aesthetic appeal. This course reviews the architectural IMP, its applications and benefits, and comparisons to other materials. It explores current trends and developments that are paving the way for increased aesthetic possibilities and building envelope performance.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/1078230
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As architects push the boundaries of design, materials that offer flexibility are essential; single-skin architectural metal wall panel systems provide such flexibility. Presented here are architectural metal wall panels, their fabrication process, design possibilities, and applications. Also discussed are the components and features of a perfect wall and a multicomponent wall assembly, the testing, safety, and installation of multicomponent metal wall panel systems, and how metal wall panels and their manufacturers can contribute to sustainability objectives.
https://redirect.aecdaily.com/s10015/www.aecdaily.com/course/1034074
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Masonry is an ideal sustainable building construction material as it is extremely durable, recyclable, and reusable. It allows for extraordinary design versatility, so it can meet both aesthetic and functional requirements. This course looks at the design elements, components, and construction techniques that characterize sustainable masonry cavity wall building envelopes.
https://redirect.aecdaily.com/s367902/www.aecdaily.com/course/999984
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today’s modern metal roof panel coatings are designed to be low friction in order to self-clean. However, when snow and ice accumulate on the roof, their rapid release causes countless personal injuries, millions of dollars in property damage and liability claims, and business disruptions worldwide. This course provides an overview of snow retention systems that protect against these dangers. Information about components of both pad and bar styles, features, installation, and layout are presented.
https://redirect.aecdaily.com/s18890/www.aecdaily.com/course/592377
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/808876
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The construction of residential and commercial buildings that use less energy to operate and are long lived is a key part of sustainable design. Insulated concrete forms (ICFs) provide the necessary U-factor, airtightness, resiliency, and durability for all building types. Insulated concrete forms in residential and commercial construction projects offer excellent thermal performance and reduced energy consumption and operating costs, while maintaining a very comfortable and healthy interior environment. This course examines the ICF wall, including materials and components, and discusses design considerations and construction.
https://redirect.aecdaily.com/s420795/www.aecdaily.com/course/874439
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787742
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
