Florida Board of Professional Engineers
With almost 44,000 active licensed engineers in the state, the Florida Board of Professional Engineers (FBPE) is committed to protecting the interest of public health and safety by properly regulating the practice of engineering.
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification.
https://redirect.aecdaily.com/s840811/www.aecdaily.com/course/862566
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With the global rise in natural disasters and the increasing need for sustainable environments, resiliency has become a necessity in the design and building industries. This course provides an overview of resilient design, how it relates to building codes and standards, and the role it plays in ensuring the safety and sustainability of the built environment. It examines the role masonry construction plays in meeting resilient design goals and the inherent properties of masonry that make it resilient and provides examples and case studies of resilient design strategies.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1073772
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.
https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/888488
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
While the kitchen has long been considered the heart of the home, the bathroom is often thought of as a utilitarian space. However, by drawing inspiration from kitchen design principles, designers can create a bathroom that’s personalized, organized, and highly functional. Beyond serving basic needs, the bathroom is a space for relaxing, recharging, and preparing for the day ahead. This course discusses strategies for incorporating organization, ergonomics, personalization, and technology to create a streamlined styling space.
https://redirect.aecdaily.com/s12219/www.aecdaily.com/course/828002
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Policies targeting the reduction of carbon emissions associated with building products require the disclosure of embodied carbon data to inform those policies and verify whether reduction targets or incentive requirements have been met. This course aims to provide a guide to collecting high-quality embodied carbon data.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/983367
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Prequalification of contractors is a method used to manage the risks of an open tender process. It ensures the contractors invited to bid on the project have demonstrated applicable experience and are capable of delivering the necessary quality and value. This course is a primer on contractor prequalification and describes who benefits from the process, the applicable project delivery methods, the role of the architect, the typical information requested of the contractor, and when to use prequalification and when not to.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1021076
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Power and charging requirements for hospitality facilities are changing radically and rapidly. This course examines the options for and benefits of supplying power and charging outlets in walls, furniture, headboards, nightstands, public seating, and public gathering spaces, including outdoor areas, as well as the applicable codes for furniture-based power outlets. The course concludes with an overview of the benefits of occupancy sensors and auto-off switches in guest rooms and the installation requirements to comply with energy and electrical codes.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1017988
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As we become more aware of the levels of toxins in our environment, we are realizing that the quality of air inside our homes is just as important as the quality of air outside our homes. This course outlines why indoor air quality is so important to our health and describes how to improve indoor air quality by using a balanced ventilation system.
https://redirect.aecdaily.com/s19871/www.aecdaily.com/course/699542
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Bamboo is a versatile building material that brings warmth and character to indoor applications such as flooring, furniture, and wall and ceiling panels; an innovative process also allows bamboo to be used outdoors in decks, soffits, and siding. This course reviews the material technologies that make bamboo products with reduced environmental impacts and better performance than traditional materials and discusses their potential to meet requirements of the LEED® v4.1 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s1036619/www.aecdaily.com/course/1065768
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Insulated metal wall panels (IMPs) offer a sleek, modern, and light-weight envelope system that is highly customizable. This course explores the characteristics of IMPs, including how they can offer a five-in-one design solution that provides the exterior finish, as well as the air, vapor, water, and thermal control layers. Discussions will also include design options, installation processes, code compliance, sustainability, and available warranties.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/834059
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The growth of EV (electric vehicle) adoption is accelerating and the behavior of EV drivers is increasing the demand for electric vehicle charging stations. This education course explains the different types of charging available and their suitable applications, and discusses the planning and installation considerations for electric vehicle supply equipment (EVSE).
https://redirect.aecdaily.com/s701406/www.aecdaily.com/course/858594
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Even with the profound shifts in how we think about and utilize the office, the essential need to communicate in writing remains unchanged. Creating spaces that foster teamwork and idea sharing rests in the hands of the individuals who design these workspaces. This course discusses the opportunities to establish spaces that invite innovative productivity by reviewing today’s available writing surfaces designed to provide teams with methods to keep up with the pace of collaboration in the new world of work.
https://redirect.aecdaily.com/s1017875/www.aecdaily.com/course/1054695
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Ensuring proper use of methods and materials allows masonry walls to perform well and enjoy a long life. Use of masonry joint reinforcement and accessories is an essential part of this. This course provides a brief history of solid masonry walls leading up to the modern cavity walls of today, including a discussion of the basic working knowledge of masonry joint reinforcing, structural codes, and moisture control in cavity wall construction.
https://redirect.aecdaily.com/s686798/www.aecdaily.com/course/884142
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A well-designed queuing system not only offers structure, efficiency, safety, and accessibility but also can enhance the aesthetics and visual appeal of an environment. This course presents an overview of the important factors that need to be considered when designing and specifying public queuing and pedestrian flow systems to facilitate a positive and orderly waiting experience.
https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1004301
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
It's time to stop thinking of only vertical pickets, horizontal rails, or glass panels when it comes to railing infill. Today's cable railing infill options are durable, versatile, attractive, low maintenance, easy to use, and virtually invisible. This course provides an overview of the advantages of stainless steel cable railing assemblies including frame design options and essential cable assembly components. It continues with a review of code requirements and concludes with a discussion of installation processes for custom cable assemblies.
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/857032
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Explosion relief systems reduce damage and loss when an explosion occurs within facilities where potentially dangerous material is being handled or produced. These systems function by immediately reducing pressure during an explosion and are imperative to protecting a company’s assets and employees. Explosion relief systems are also referred to as explosion relief panels, pressure relief panels, or explosion relief vents. This course discusses pressure relief in low-strength enclosures, industries requiring pressure relief venting, and the function, design, and installation of these systems.
https://redirect.aecdaily.com/s2955/www.aecdaily.com/course/808876
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
From classrooms to boardrooms to living rooms, hanging display systems enhance spaces and provide design freedom. This course examines wall hanging systems with a focus on integrating systems in the overall design of a project and includes discussions on system elements, selection criteria, specialty applications, and sustainable design.
https://redirect.aecdaily.com/s468281/www.aecdaily.com/course/888382
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Changing climate and land use patterns have necessitated a greater focus on stormwater management. The trench drain industry has developed in a rather fragmented way over the decades, with each manufacturer using their own unique reference points for dimension, load rating, and other criteria. The purpose of this course is to clear up the resulting confusion and provide best practices and a real-world understanding of the multiple variables at play on the project level.
https://redirect.aecdaily.com/s921773/www.aecdaily.com/course/1009739
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
From home offices to gyms to entertaining, homes have become multifunctional spaces. The use of smart technology provides innovative options for people to control and manage their homes for comfort and well-being on a daily basis. Smart home technology allows people to customize their homes. This course discusses how smart technology can interconnect household spaces to increase comfort, cleanliness, and well-being.
https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/963191
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Redwood Timbers are a safe, strong, and sustainable option for exterior and interior building projects where natural wood is desired. This course provides an overview of the properties of Redwood Timbers including insulation properties, grades, dimensions, fasteners, finishing options, and strength. It concludes with numerous case studies exploring the use of Redwood Timbers for post and beam construction, decorative elements, deck posts, and outdoor living structures.
https://redirect.aecdaily.com/s632921/www.aecdaily.com/course/836218
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Greenhouses are used in an array of applications from residential to commercial, institutional, or educational. This course describes the glazing options, accessories, environmental controls, and planning considerations that contribute to a successful greenhouse. Also presented are the configuration options and decorative details that make each greenhouse unique and ideally suited for its purpose.
https://redirect.aecdaily.com/s19829/www.aecdaily.com/course/887179
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In today’s building designs, considering the environmental impact of construction projects is of utmost importance. As a result, factors such as durability, installation speed, cost reduction, and long-term value have become crucial aspects of building designs. This course addresses these concerns in the context of nonresidential building renovations, focusing specifically on using state-of-the-art acoustical ceiling coatings as an alternative to removal and replacement with new materials. The course also examines how acoustical ceiling coatings may apply to several credits and features in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2.
https://redirect.aecdaily.com/s381226/www.aecdaily.com/course/1111932
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Strength and conditioning facilities are designed for high-performance athlete training at the professional, international, national, collegiate, and high school levels. These facilities are fundamentally different than commercial fitness centers (which focus on improving general fitness) and must be custom designed for the athletes' sport-specific training programs. This course reviews key design considerations for these facilities, including specialized flooring construction required for athlete safety and preservation of building structure.
https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/944271
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Solid surface is a popular material choice due to its beauty, durability, and ease of cleaning. Selecting a solid surface depends on the manufacturing process, the raw materials involved, and the material’s sustainability. This course examines solid surface as a decorative material, discusses its characteristics and attributes, and compares it with other hard surface materials
https://redirect.aecdaily.com/s15612/www.aecdaily.com/course/1029637
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
