Building knowledge and connections
Sponsored By: STEP Warmfloor
Description: With a radiant heat system, the temperature profile associated with a forced-air system is switched around, and the entire floor becomes the radiator. The heat radiates from the floor, warming all of the objects in the room, and everything in the room gains a warm, comfortable feel to it. This course evaluates self-regulating polymer technology and the performance benefits of using PTC (positive temperature coefficient) heaters for energy-efficient floor warming, primary heating, snow melting, and roof deicing.
Presented by: Monica Irgens, Electro Plastics, Inc. / STEP Warmfloor
Name: Monica Irgens
Title: President, Electro Plastics, Inc. / STEP Warmfloor
Monica is President of Electro Plastics, Inc. - manufacturer of STEP Warmfloor® heating systems: a patented, low-voltage, self-regulating, PTC semi-conductive flat and thin heater. Monica has been active in the radiant heating industry for over 20 years. She was a member of the Radiant Panel Association for 15 years, including 8 years on the RPA Board of Directors and chairperson of the Electric Committee and the Green Committee. She wrote and presented the Electric Radiant Course for the RPA, a course on PTC Heating Technology for Architects, and the STEP Warmfloor Handbook. Monica is a certified IICRC Senior Floor Inspector and ATF Hard Surface Inspector. Monica is also a member of the USGBC and has been involved in the design of their company owned building which is LEED registered. She keeps updated on all issues concerning green sustainability and energy efficiency, including IAQ and the environment. Monica is a member and working with UL and CSA on the standard committees for electric radiant heating. Monica is fluent in English, French, and Spanish.
Privacy Policy: STEP Warmfloor Privacy Policy
HSW Eligibility: Yes
Association Information: View Association Details
AIA/CES Info: Course# AEC1453
AIA/CES Learning units: 1.00
AIA approved course. This course qualifies for 1.0 LU/HSW Hour.
AEC Daily reports Learning Units on members’ behalf.
GBCI Info: Course# AEC1453
GBCI CE Hours: 1.00
USGBC/GBCI approved for GBCI General CE Hours. Course approval #920021736
AEC Daily reports Learning Units on members’ behalf.
HSW Info: Course# AEC1453
Hours: 1.00
This course qualifies for HSW.
AIBD Info: Course# AEC1453
CE Hours: 1.00
AIBD approved course. This course qualifies for HSW.
AEC Daily reports Learning Units on members’ behalf.
AIC Info: Course# AEC1453
CPD Hours: 1.00
AIC approved course.
Hours must be self-reported to the AIC.
ASHRAE Info: Course# AEC1453
PDHs: 1.00
Course meets ASHRAE guidelines for acceptable Professional Development Hours (PDHs) for recertification purposes. Ensure this course content is related to ASHRAE certification practice area: BEAP, BEMP, CPMP, HBDP, HFDP & OPMP.
BOMI Info: Course# AEC1453
CPD Hours: 1.00
BOMI approved course. This program qualifies for BOMI Institute Continuing Professional Development (CPD) credit for RPA, FMA, and/or SMA graduates. This course qualifies for HSW.
Members must self-report CPD hours.
CCIDC Info: Course# AEC1453
CE Hours: 1.00
CCIDC approved course. This course qualifies for HSW.
Members must self-report CEU hours to CCIDC.
FBPE Info: Provider Number 0004278, Sequence Number 0000031. Course# AEC1453
PDHs: 1.00
FBPE approved provider.
IDCEC Info: Course# AEC1453
IDCEC Approved CEU: 0.1 HSW - Sustainability - 1 hour program.
Course Code: CC-103307R1-1000
Subject Code: 5.6
Classification: Basic
This CEU is registered with the International Design Continuing Education Council Inc. (IDCEC) for continuing education credits. This credit will be accepted by the American Society of Interior Designers (ASID), International Interior Designers Association (IIDA) and Interior Designers of Canada (IDC). The content included is not deemed or construed to be an approval or endorsement by IDCEC of any material or construction or any method or manner of handling, using, distributing or dealing in any material or product. Questions related to specific materials, methods and services should be directed to the instructor or provider. This program is registered for 0.1 CEU (continuing education credit).
InterNACHI Info: Course# AEC1453
CE Hours: 1.00
InterNACHI approved course. This course qualifies for HSW.
Members must self-report CE hours to InterNACHI.
LSBAE Info: Course# AEC1453
Hours: 1.00
LSBAE approved course.
Credit hours will be reported through cebroker.com
NAHB Info: Course# AEC1453
CE Hours: 1.00
This program meets NAHB's continuing education requirements for one or more of the following designations: Certified Graduate Associate (CGA), Certified Graduate Builder (CGB), Certified Graduate Remodeler (CGR), Certified Green Professional (CGP), Graduate Master Builder (GMB), Graduate Master Remodeler (GMR), Certified Aging-In-Place Specialist (CAPS)
NARI Info: Course# AEC1453
CEUs: 0.10
NARI approved course.
0.1 CEU toward certification renewals. 1 Hour toward certification application.
RCEP Info: Course# AEC1453
PDH: 1.00
AEC Daily is an RCEP-approved continuing education provider.
Credit earned on completion of this program will be reported to RCEP.
RMMI Info: Course# AEC1453
Credit Per Hour: 1.00
This is a RMMI approved course.
RMMI will confirm certification credit upon receipt of Certificate of Completion (members must self-report).
AAA Info: Provider No. A-002. Course# AEC1453
Learning hours: 1.00
This course is approved as a Structured Course.
AAA Members must self-report their learning hours to AAA.
AANB + ALBNL + NSAA Info: Course# AEC1453
Core Hours: 1.00
This course is EPP approved.
Members must self-report their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
AAPEI Info: Course# AEC1453
Learning hours: 1.00
This course is approved as a Core Learning Activity.
Members must self-record their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
AIBC Info: Course# AEC1453
Learning units: 1.00
AIBC members may self-report this learning activity for consideration of AIBC learning units.
CAHPI Info: Course# AEC1453
MRC Hours 1.00
CAHPI approved course, MRC Hours.
Members must self-report MRC hours to CAHPI.
CSC Info: Course# AEC1453
PDE Hours: 1.00
CSC approved course. This course qualifies for HSW.
Members must self-report PDE hours to CSC.
NLAA Info: Course# AEC1453
Learning units: 1.00
This course is approved as a core course.
Members must self-report LUs through the MCET National Con Ed reporting website. (www.architranscripts.ca/default.htm)
NWTAA Info: Course# AEC1453
Learning Hours: 1.00
This course is approved as a Structured course.
Members must self-report Learning Hours through the National Con Ed reporting website at https://www.raic.org/transcripts/default.htm
OAA Info: Course# AEC1453
Hours: 1.00
This course may apply to both OAA structured and unstructured learning as long as it addresses the required subject matter topics.
Members must self-report activity to OAA and retain your Certificate of Completion.
OntarioACHI Info: Course# AEC1453
CEU/CPD Hours: 1.00
This course has been accredited for continued development towards the Canadian-Certified Home Inspection (CCHI) Designation.
Members must upload the certificate of completion to their profile for this training to be recognized: https://ontarioachi.ca/members/member-profile
OAQ Info: Course# AEC1453 / Cours # AEC1453
Hours / Nombre d’heures: 1.00
This course qualifies for self-directed learning activity with the OAQ. / Ce cours est reconnu par l’OAQ comme activité d’auto-apprentissage.
Members must self-report hours to OAQ. / Les membres doivent rapporter eux-mêmes leurs heures à l’OAQ.
SAA Info: Provider No. 1036. Course# AEC1453
Learning units: 1.00
This course is approved as a core course.
Members must self-report LUs through the RAIC National Con Ed reporting website. http://raic.org/transcripts.
MCE Information:
Contact your respective governmental licensing and regulatory agency.
Additional Information: All Courses from This Company | Company Information