Building knowledge and connections
Sponsored By: ISE Logik Industries, Inc.
Description: Finish elements such as the floorcovering system have a great impact on the final aesthetics of a structure. Floorcovering specification sections often do not address the compatibility of the floorcovering system with the type of application and intended service use. This is not done intentionally; rather, it is an innate result of a misunderstanding of sufficient compatibilities of the various types of floorcovering systems with their installed environments. This course discusses published floorcovering system installation standards and specifications that aid in the strengthening of 09 sections to avoid these incompatibilities. In addition, identification and categorization of various floorcovering system failures, immediate and latent, are presented, as well as how to properly prevent these failures from occurring during the design process for a successful floorcovering system installation.
Presented by: David Seland and Dean Craft, ISE Logik Industries, Inc.
Name: David Seland and Dean Craft
Title: David Seland, Principal and Dean Craft, Principal, ISE Logik Industries, Inc.
David Seland is a Principal and Founder of ISE Logik Industries. Over the past 35 years he has worked in a wide range of positions in the building products industry including floorcoverings, coatings, and substrates. As one of the top independent building products failure analysts focused on coverings and coatings applied to substrates, David directed over 5,000 on site field inspections throughout the Americas for product manufacturers, project owners, and construction managers. David is a Master Certified Floorcovering Installer and a Master Certified Floorcovering Inspector.
Dean Craft is the principal author and technical chair of ASTM F3191-16, “Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring,” and completed his doctoral work in 2017 with a dissertation entitled “Fallacy of Current Industry Approach to Assessing Concrete Moisture Before Flooring Installation.” Since 2009, he has presented more than a thousand times on how the issue of concrete moisture that causes flooring installation delays can be proactively addressed in design, as opposed to incurring project delays and cost overruns as the work approaches substantial completion.
Privacy Policy: ISE Logik Industries, Inc. Privacy Policy
HSW Eligibility: Yes
Association Information: View Association Details
AIA/CES Info: Course# AEC1592:1
AIA/CES Learning units: 1.00
AIA approved course. This course qualifies for 1.0 LU/HSW Hour.
AEC Daily reports Learning Units on members’ behalf.
HSW Info: Course# AEC1592:1
Hours: 1.00
This course qualifies for HSW.
ACIA Info: Course# AEC1592:1
Credits: 1.00
This course is approved for ACIA RCI CEUs. This course qualifies for HSW.
ACIA members self-report to ACIA by submitting their certificate of completion to ACIA for RCI renewal.
AIBD Info: Course# AEC1592:1
CE Hours: 1.00
AIBD approved course. This course qualifies for HSW.
AEC Daily reports Learning Units on members’ behalf.
AIC Info: Course# AEC1592:1
CPD Hours: 1.00
AIC approved course.
Hours must be self-reported to the AIC.
BOMI Info: Course# AEC1592:1
CPD Hours: 1.00
BOMI approved course. This program qualifies for BOMI Institute Continuing Professional Development (CPD) credit for RPA, FMA, and/or SMA graduates. This course qualifies for HSW.
Members must self-report CPD hours.
CCIDC Info: Course# AEC1592:1
CE Hours: 1.00
CCIDC approved course. This course qualifies for HSW.
Members must self-report CEU hours to CCIDC.
FBPE Info: Provider Number 0004278, Sequence Number 0000031. Course# AEC1592:1
PDHs: 1.00
FBPE approved provider.
IDCEC Info: Course# AEC1592:1
IDCEC Approved CEU: 0.1 HSW - 1 hour program
Course Code: CC-113827-1000
Subject Code: 5.8
Classification: Basic
This CEU is registered with the International Design Continuing Education Council Inc. (IDCEC) for continuing education credits. This credit will be accepted by the American Society of Interior Designers (ASID), International Interior Designers Association (IIDA) and Interior Designers of Canada (IDC). The content included is not deemed or construed to be an approval or endorsement by IDCEC of any material or construction or any method or manner of handling, using, distributing or dealing in any material or product. Questions related to specific materials, methods and services should be directed to the instructor or provider. This program is registered for 0.1 CEU (continuing education credit).
InterNACHI Info: Course# AEC1592:1
CE Hours: 1.00
InterNACHI approved course. This course qualifies for HSW.
Members must self-report CE hours to InterNACHI.
LSBAE Info: Course# AEC1592:1
Hours: 1.00
LSBAE approved course.
Credit hours will be reported through cebroker.com
LSBID Info: Course# AEC1592:1
CEU 0.10
This course qualifies for HSW.
LSBID approved course. Members self-report their credit to the Louisiana State Board of Interior Designers.
NAHB Info: Course# AEC1592:1
CE Hours: 1.00
This program meets NAHB's continuing education requirements for one or more of the following designations: Certified Graduate Associate (CGA), Certified Graduate Builder (CGB), Certified Graduate Remodeler (CGR), Certified Green Professional (CGP), Graduate Master Builder (GMB), Graduate Master Remodeler (GMR), Certified Aging-In-Place Specialist (CAPS)
NARI Info: Course# AEC1592:1
CEUs: 0.10
NARI approved course.
0.1 CEU toward certification renewals. 1 Hour toward certification application.
NKBA Info: Course# AEC1592:1
CEUs: 0.10
NKBA approved course.
NKBA members must self-report CEUs to NKBA.
RCEP Info: Course# AEC1592:1
PDH: 1.00
AEC Daily is an RCEP-approved continuing education provider.
Credit earned on completion of this program will be reported to RCEP.
RMMI Info: Course# AEC1592:1
Credit Per Hour: 0.10
This is a RMMI approved course.
RMMI will confirm certification credit upon receipt of Certificate of Completion (members must self-report).
AAA Info: Provider No. A-002. Course# AEC1592:1
Learning hours: 1.00
This course is approved as a Structured Course.
AAA Members must self-report their learning hours to AAA.
AANB Info: Course# AEC1592:1
Core Hours: 1.00
This course is EPP approved.
Members must self-report their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
AAPEI Info: Course# AEC1592:1
Learning hours: 1.00
This course is approved as a Core Learning Activity.
Members must self-record their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.
AIBC Info: Course# AEC1592:1
Learning units: 1.00
AIBC members may self-report this learning activity for consideration of AIBC learning units.
CAHPI Info: Course# AEC1592:1
MRC Hours 1.00
CAHPI approved course, MRC Hours.
Members must self-report MRC hours to CAHPI.
CSC Info: Course# AEC1592:1
PDE Hours: 1.00
CSC approved course. This course qualifies for HSW.
Members must self-report PDE hours to CSC.
NLAA Info: Course# AEC1592:1
Learning units: 1.00
This course is approved as a core course.
Members must self-report LUs through the MCET National Con Ed reporting website. (www.architranscripts.ca/default.htm)
NWTAA Info: Course# AEC1592:1
Learning Hours: 1.00
This course is approved as a Structured course.
Members must self-report Learning Hours through the National Con Ed reporting website at https://www.raic.org/transcripts/default.htm
OAA Info: Course# AEC1592:1
Hours: 1.00
This course may apply to both OAA structured and unstructured learning as long as it addresses the required subject matter topics.
Members must self-report activity to OAA and retain your Certificate of Completion.
OntarioACHI Info: Course# AEC1592:1
CEU/CPD Hours: 1.00
This course has been accredited for continued development towards the Canadian-Certified Home Inspection (CCHI) Designation.
Members must upload the certificate of completion to their profile for this training to be recognized: https://ontarioachi.ca/members/member-profile
OAQ Info: Course# AEC1592:1 / Cours # AEC1592:1
Hours / Nombre d’heures: 1.00
This course qualifies for self-directed learning activity with the OAQ. / Ce cours est reconnu par l’OAQ comme activité d’auto-apprentissage.
Members must self-report hours to OAQ. / Les membres doivent rapporter eux-mêmes leurs heures à l’OAQ.
SAA Info: Provider No. 1036. Course# AEC1592:1
Learning units: 1.00
This course is approved as a core course.
Members must self-report LUs through the RAIC National Con Ed reporting website. http://raic.org/transcripts.
MCE Information:
Contact your respective governmental licensing and regulatory agency.
Additional Information: All Courses from This Company | Company Information