Understanding Flooring Failures: Causes, Prevention, and Solutions

This course examines the key reasons flooring fails, from inadequate subfloor preparation to improper installation techniques. Covering a range of flooring types, the course identifies common pitfalls and best practices for durable, high-quality installations that enhance performance and safety. This course is designed for architects and industry professionals and offers guidance on selecting and specifying the right products and solutions to ensure long-lasting flooring success and occupant safety.

Upon completion of this course, the Learner should be able to:

Recall the impact of flooring failures on performance, durability, and occupant safety.
Identify common flooring types, their advantages and limitations, and typical installation methods.
Recognize the common causes of flooring failures, including moisture, inadequate subfloor preparation, improper installation techniques, lack of movement joints, and incorrect material or adhesive selection.
Examine symptoms of flooring failures and explore corrective measures and products that help prevent such issues.
Recall compatible flooring products used in surface preparation, installation, or maintenance to enhance flooring longevity, safety, and performance.

Approximately 1 hour. Delivered online, at your own pace.

Presented by Steve Bramhall on behalf of Proflex Products Inc.. View the Privacy Policy .

This course is registered with: 30 Industry Association(s)

Industry Association(s)

American Institute of Architects (AIA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

AIA/CES Learning units: 1

AIA approved course. This course qualifies for 1.0 LU/HSW Hour.

AEC Daily reports Learning Units on members' behalf.

Health, Safety, and Welfare (HSW)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Hours: 1

This course qualifies for HSW.

American Academy of Healthcare Interior Designers (AAHID)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CEU Hours: 1

This course may be recognized by the AAHID as long as subject matter is focused on appropriate healthcare interior design topics relating to your area of expertise, difficulty level and interest.

CEU's are self-reported to the NCIDQ.

American Construction Inspectors Association (ACIA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Credits: 1

This course is approved for ACIA RCI CEUs. This course qualifies for HSW.

ACIA members self-report to ACIA by submitting their certificate of completion to ACIA for RCI renewal.

American Institute of Building Design (AIBD)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CE Hours: 1

AIBD approved course. This course qualifies for HSW.

Learners self-report.

American Institute of Constructors (AIC)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CPD Hours: 1

AIC approved course.

Hours must be self-reported to the AIC.

Building Owners and Managers Institute - Continuing Professional Development (BOMI CPD)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CPD Hours: 1

BOMI approved course. This program qualifies for BOMI Institute Continuing Professional Development (CPD) credit for RPA, FMA, and/or SMA graduates. This course qualifies for HSW.

Members must self-report CPD hours.

California Council for Interior Design Certification (CCIDC)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CE Hours: 1

CCIDC approved course. This course qualifies for HSW.

Members must self-report CEU hours to CCIDC.

Decorator and Designers Association (DDA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CEUs: 0.1

Members must self-report CEUs to DDA.

DDA will accept all IDCEC-approved courses.

Florida Board of Professional Engineers (FBPE)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Provider Number: 0004278, Sequence Number 0000031

PDHs: 1

FBPE approved provider.

International Design Continuing Education Council Inc. (IDCEC)

Course Number/ID: AEC2114:1

Approval ID: CC-124044-1000

CEUs: 0.1

Health, Safety, Welfare

This CEU is registered with the International Design Continuing Education Council Inc. (IDCEC) for continuing education credits. This credit will be accepted by the American Society of Interior Designers (ASID), International Interior Designers Association (IIDA) and Interior Designers of Canada (IDC). The content included is not deemed or construed to be an approval or endorsement by IDCEC of any material or construction or any method or manner of handling, using, distributing or dealing in any material or product. Questions related to specific materials, methods and services should be directed to the instructor or provider. This program is registered for CEUs (continuing education credits).

The International Association of Certified Home Inspectors (InterNACHI)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CE Hours: 1

InterNACHI approved course. This course qualifies for HSW.

Members must self-report CE hours to InterNACHI.

Oregon Construction Contractors Board (CCB)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Hour(s) 1

The course is approved by the State of Oregon Construction Contractors Board.

Members must self-report.

Louisiana State Board of Examiners of Interior Designers (LSBID)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CEU 0.1

This course qualifies for HSW.

LSBID approved course. Members self-report their credit to the Louisiana State Board of Interior Designers.

National Association of Home Builders (NAHB)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CE Hours: 1

This program meets NAHB's continuing education requirements for one or more of the following designations: Certified Graduate Associate (CGA), Certified Graduate Builder (CGB), Certified Graduate Remodeler (CGR), Certified Green Professional (CGP), Graduate Master Builder (GMB), Graduate Master Remodeler (GMR), Certified Aging-In-Place Specialist (CAPS)

National Association of the Remodeling Industry (NARI)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CEUs: 0.1

NARI approved course.

0.1 CEU toward certification renewals. 1 Hour toward certification application.

National Kitchen & Bath Association (NKBA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

CEUs: 0.1

NKBA approved course.

NKBA members must self-report CEUs to NKBA.

Registered Continuing Education Program (RCEP)

Course Number/ID: AEC2114:1

Approval ID: 194033

PDH: 1

AEC Daily is an RCEP-approved continuing education provider.

Credit earned on completion of this program will be reported to RCEP.

Rocky Mountain Masonry Institute (RMMI)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Credit Per Hour: 1

This is a RMMI approved course.

RMMI will confirm certification credit upon receipt of Certificate of Completion (members must self-report).

The Alberta Association of Architects (AAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Provider No.: A-002

Learning hours: 1

This course is approved as a Structured Course.

AAA Members must self-report their learning hours to AAA.

AANB + ALBNL + NSAA (AANB + ALBNL + NSAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Core Hours: 1

This course is EPP approved.

Members must self-report their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts

Architects Association of Prince Edward Island (AAPEI)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Learning hours: 1

This course is approved as a Core Learning Activity.

Members must self-record their learning hours on the RAIC|Architecture Canada Transcript Database, https://raic.org/transcripts.

Architectural Institute of British Columbia (AIBC)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Learning units: 1

AIBC members may self-report this learning activity for consideration of AIBC learning units.

Canadian Association of Home and Property Inspectors (CAHPI)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

MRC Hours 1

CAHPI approved course, MRC Hours.

Members must self-report MRC hours to CAHPI.

Construction Specifications Canada (CSC)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

PDE Hours: 1

CSC approved course. This course qualifies for HSW.

Members must self-report PDE hours to CSC.

Newfoundland & Labrador Association of Architects (NLAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Learning units: 1

This course is approved as a core course.

Members must self-report LUs through the MCET National Con Ed reporting website. (www.architranscripts.ca/default.htm)

Northwest Territories Association of Architects (NWTAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Learning Hours: 1

This course is approved as a Structured course.

Members must self-report Learning Hours through the National Con Ed reporting website at https://www.raic.org/transcripts/default.htm

Ontario Association of Architects (OAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Hours: 1

This course may apply to both OAA structured and unstructured learning as long as it addresses the required subject matter topics.

Members must self-report activity to OAA and retain your Certificate of Completion.

Ordre des architectes du Québec (OAQ)

Course Number/ID: AEC2114 / Cours # AEC2114

Approval ID: AEC2114 / Cours # AEC2114

Hours / Nombre d’heures: 1

This course qualifies for self-directed learning activity with the OAQ. / Ce cours est reconnu par l’OAQ comme activité d’auto-apprentissage.

Members must self-report hours to OAQ. / Les membres doivent rapporter eux-mêmes leurs heures à l'OAQ.

Saskatchewan Association of Architects (SAA)

Course Number/ID: AEC2114:1

Approval ID: AEC2114:1

Provider No.: 1036

Learning units: 1

This course is approved as a core course.

Members must self-report LUs through the RAIC National Con Ed reporting website. http://raic.org/transcripts.

ASK A QUESTION!

SAVE FOR LATER

Proflex Products Inc.

Proflex Products Inc.

Understanding Flooring Failures: Causes, Prevention, and Solutions

Presenter Information

Industry Association(s)

Take This Course Mobile!