Enhancing Building Performance with Fiberglass Fenestration ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/1121148

In response to a stronger emphasis on natural resources, building efficiencies, and occupant welfare, manufacturers continue to improve design service offerings, product performance, and installation solutions. Fiberglass fenestration meets these demands for residential and commercial design in the built environment. This course explores the performance attributes of fiberglass fenestration, energy efficiency and structural benefits, testing and verification processes, and contributions to healthy building occupancy.

The Advantages of Polyiso Insulation in Below-Grade Installations ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s12209/www.aecdaily.com/course/1028782

Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system.

Building Engineering for Infection Control ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1063182/www.aecdaily.com/course/1146146

The Medical University of South Carolina (MUSC) health system is among the nation’s top comprehensive academic health sciences centers. Infection and contamination control are critical to the hospital’s infrastructure to protect not only patients but also their providers during the delivery of care. Well-designed building engineering systems play a key role in ensuring air supply and circulation, pressurization, hazardous exhaust, and plumbing systems have all been optimized for comfort, health, and safety. MUSC worked with RMF Engineering on two recent renovation projects––the Ashley River Tower bone marrow transplant outpatient clinic and the Hollings Cancer Center chemo pharmacy––that both highlight best practices in infection and contamination control for today while preparing for the potential of tomorrow.

Wash Your Hands One More Time ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/921739

The importance of handwashing in regard to personal health is well understood, and most people feel they know how to do it properly. However, the places where and methods by which hands are washed are not always as healthy and safe as they should or appear to be. This course outlines the proper handwashing techniques, especially for healthcare and food preparation contexts; explains how germs, viruses, and bacteria are spread and where sanitation problems with sinks may reside; and describes how to select and specify the most appropriate washup, infection prevention, and scrub sinks, countertops, and fitments.

High-Performance Insulated Metal Panel Façade Systems ( ~ 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064

A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.

Elevated: The Benefits of Configurable Elevator Interior Systems (CEISs) ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s779980/www.aecdaily.com/course/1165069

This course explores design strategies for tailoring elevator interiors to project-specific needs, compares original equipment manufacturer (OEM) elevator interiors, bespoke elevator interiors, and configurable elevator interior systems (CEISs), and examines best practices for specifying CEISs to enhance safety, performance, and visual continuity.

Current Trends in Healthcare Plumbing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/1083088

Healthcare facilities are striving to meet the needs of all patients and caregivers by offering healthy, safe, and inclusive spaces that can be repurposed quickly if needed. This course reviews innovations in plumbing design, such as vacuum plumbing and its applications, and explores how these design innovations support trending healthcare needs, including infection prevention, behavioral healthcare, and bariatric applications, and fulfill ADA requirements. Several case studies showcasing successful examples are also covered.

Glazing Strategies for Sound Control ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/958335

Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.

How Building Partitions and Floors Attenuate Sound ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s746194/www.aecdaily.com/course/892298

Today, architects and designers need to give special consideration to building acoustics when developing plans for new and newly renovated construction projects. Excessive noise in any environment is considered a serious problem that can negatively impact occupant comfort, leading to learning difficulties, sleep deprivation, delayed recovery from illness, and lack of privacy. Sound basics are discussed in this course, and STC, IIC, and sound attenuation (reduction) techniques are explained. Various case studies are examined to develop further understanding of the performance of common sound abatement assemblies that are essential for occupant well-being and comfort.

Top-Down Design for Green Streets ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s935013/www.aecdaily.com/course/944205

Trees are essential for the health of the urban environment, mitigating the heat island effect, cleaning the air, reducing stormwater runoff, and improving residents’ health and well-being. But cities are often inhospitable to trees, where their growth may be stunted or their roots may damage surrounding infrastructure. This course explores ways to design successful projects incorporating green infrastructure by understanding the principles behind tree growth, proper type and amount of soil, water management, and the role of soil vault systems in helping urban trees thrive.

Specifying Modern Vinyl ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s658378/www.aecdaily.com/course/1166706

Vinyl is suitable for many building materials and is often the best selection when durability, aesthetics, and value are vital. This course is intended to help designers and specifiers make the most informed decisions about vinyl product selection. It describes the realities and improvements of today’s vinyl product manufacturing, discusses the latest information about the safety and sustainability of vinyl products, and presents a verification standard for responsible vinyl manufacturing.

Advantages of Cold-Applied Roofing Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13250/www.aecdaily.com/course/623569

When the asphalt fumes, open flame, and kettles that accompany hot-applied roofing are not permissible, cold-applied roofing is an option. There are a variety of types of cold-applied roofing that offer easy portability of materials to the roof, smaller roofing crews, ease of application, and a low-VOC option. In this course, we focus on the adhesive application of modified bitumen membranes using bituminous cold-process adhesives, the adhesive types, their components and characteristics, application methods, and design and use considerations.

EPS Insulation for Innovative Roofing Applications ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s20141/www.aecdaily.com/course/1145493

Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency.

Universal Design: Applied to Bathroom and Kitchen ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s8547/www.aecdaily.com/course/915899

Universal design is not a new concept; however, it is time for a paradigm shift. Considering ADA design, universal design, and living in place, should designers now be offering universal design solutions to all clients, regardless of age or ability? This course reviews both ADA and universal design guidelines and discusses compelling reasons for recommending universal design in your kitchen and bathroom projects. Various kitchen and bathroom applications are discussed in detail.

Glass Fiber Reinforced Concrete (GFRC) ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s707154/www.aecdaily.com/course/969691

Throughout history, concrete mixes and carved natural stone have combined to create substance, beauty, and longevity in our architecture. Glass fiber reinforced concrete (GFRC) was created to ensure that the attributes of concrete and stone continue to be enjoyed but with efficiency in the application that is expected in today's world of design. This course covers the creation of GFRC, its components, fabrication, applications, and design capabilities. It compares GFRC to other types of architectural concrete and presents GFRC performance and sustainable design advantages.

Uniting Sustainability and Aesthetics: Wood-Plastic Composite Cladding for Rainscreen Assemblies, Decks, & Railings ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s951401/www.aecdaily.com/course/964377

Today’s building professionals seeking better moisture management and energy efficiency from the exteriors of their projects are turning to rainscreens as a solution to both. Wood-plastic composite (WPC) provides a durable and long-lasting material suitable for use in rainscreen systems, decks, railings, and more. Reviewed in this course are the manufacturing process, performance and green benefits, and installation of WPC cladding that is fully capped with a polymeric plastic “shield,” providing long-term resistance to moisture, staining, and fading.

Noise Control Solutions: Resilient Sound Isolation Clips ( ~ 1 hour, 30 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589

Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.

An Overview of Commercial Rolling Door Products ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s10851/www.aecdaily.com/course/890158

Rolling doors are used in heavy-duty, medium-duty, and light-duty applications for a wide range of commercial, industrial, and construction environments. This course provides a review of the features, components, options, and applications of various types of commercial rolling door products.

Power and Charging Solutions for Today’s Commercial Spaces ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/836152

Power and charging needs in hotels, offices, and lobbies have changed due to emerging trends in how people use their electronic devices. Modern users require more and better access to charging. This need combined with the rise of the USB-Type C Standard, new furniture-based power technology, and the challenges of open space design requires designers to apply a new strategy for power/charging outlets. This course discusses how to employ furniture power distribution units (FPDUs) to meet the needs of users, hotel operators, and facility managers.

NFPA 285: What We’ve Learned, What’s Changed, and What We Thought We Knew ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1067507

This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water-resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. The course also addresses code compliance in light of recent material changes, code changes, and additional testing.

Resilient Exteriors ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18901/www.aecdaily.com/course/959803

Designing a structure that is resilient requires a strong understanding of material and building science. This course discusses the composition, performance, and application of engineered polymer siding and trim and capped polymer cladding to illustrate the benefits to home and building owners when construction materials are selected with resilience and sustainability in mind.

Bulletproof Glass and Bullet-Resistant Barriers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s455170/www.aecdaily.com/course/847332

Incorporating bulletproof glass into any facility is a sizable investment; however, it is a small price to pay for the protection of human lives. This course illustrates how to maximize that investment by selecting and installing the appropriate system for the threat level and the functional needs of the client. Discussed are UL protection level ratings; types of bullet-resistant barrier systems and their components; planning, production, and installation of systems; security window film vs. bullet-resistant glass; and project security checklists.

Outthinking the Outdoors: Capitalizing on Customizable Retractable Roofs ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1112878/www.aecdaily.com/course/1136083

Designers increasingly focus on creating environments that improve the health, welfare, and productivity of occupants. This includes providing the benefits of daylight, fresh air, and access to the outdoors. This course explores how retractable roofs can extend the use of outdoor spaces year-round by converting them to daylit indoor spaces seasonally or with sudden weather changes. It explains the economic benefits, structure, and operation of various retractable roof types and how they can be customized to suit multiple site sizes and types, including rooftops. The course concludes with a series of case studies.

Basics of Insulated Metal Panels ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/1158278

A high-performance building envelope, such as one made with architectural insulated metal panels (IMPs), serves as the building’s primary defense against environmental elements and protects the health and well-being of its occupants. This course reviews the components and benefits of IMPs, which offer all four control layers—air, vapor, thermal, and water—within a single component, delivering superior thermal performance and high-end design.

Water Conservation: Initiatives and Standards ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s6403/www.aecdaily.com/course/1080220

Water is one of our most valuable resources, yet many states suffer water shortages due to preventable problems such as overuse and leakages. This course discusses the increased need for water conservation and examines the requirements in CALGreen and the LEED® v4.1, Green Globes®, and BREEAM In-Use green building rating systems. The EPA’s WaterSense® initiative is also discussed, along with case studies explaining the benefits of concealed toilet systems and their contribution to water conservation. This course is one of two identical courses titled Water Conservation: Initiatives and Standards . You will receive credit for taking only one of these courses.