The Nova Scotia Association of Architects

The Nova Scotia Association of Architects (NSAA) is a self-governing professional association established in 1932, and mandated by the Province of Nova Scotia under The Architects Act to regulate the practice of architecture in the province.

Click to Learn More About the Nova Scotia Association of Architects

Visit www.nsaa.ns.ca and Join Now!

Displaying 1 - 25 of 28 results.

FIRST [1-25] [26-28] NEXT LAST SHOW ALL

  • ( ~ 1 hour ) 

    Third-party environmental product declarations (EPDs), using a life-cycle analysis (LCA) approach, provide a comprehensive analysis and quantification of a product’s sustainability. This course examines how EPDs can inform sustainable site furniture selection and how the use of sustainable site furniture can contribute to meeting various credit requirements of LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 30 minutes ) 

    As cities continue to grow, incorporating synthetic surfacing into rooftop spaces offers a safe, practical, and innovative solution to creating more livable, attractive, and resilient urban environments. The course explores synthetic rooftop surfacing, including its applications; environmental, health, and safety benefits; and product, manufacturer, and installer certifications. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    A hybrid paving system is an outdoor flooring solution that combines timeless design, lasting durability, and installation efficiency. This course introduces hybrid paving systems and compares them to traditional paving materials. Best practices for installation, including base preparation and drainage considerations, are presented. The course explores residential and commercial applications and highlights how material selection and installation impact long-term performance, life-cycle costs, safety, and sustainability.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The design of behavioral healthcare facilities should address the therapeutic and safety needs of patients and staff while meeting the applicable codes and regulations. Reviewed in this course are ligature-resistant products developed for patient rooms and bathrooms that strike the balance between providing the safest design solutions and creating a noninstitutional environment.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Masonry wall types have evolved from self-supporting mass walls to cavity walls and veneers that require wall ties or anchors. Over time, anchors can fail and masonry wall systems can become unstable and require repair. This course discusses how to recognize unstable façades, how retrofit anchors can be used to repair these instabilities, the different types of anchors available, and how to determine the proper repair procedure.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Exterior walls are exposed to solar radiation throughout the day, yet their contribution to heat gain is often overlooked, even though it affects energy use, occupant comfort, and facade durability. This course explores the science of infrared reflectance, key performance metrics, and coating technologies that reduce wall heat gain in new and existing buildings. Participants will learn how reflective wall strategies support building performance goals, energy code compliance, and LEED® v5 Building Design and Construction sustainability objectives.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour, 30 minutes ) 

    Masonry is an ideal sustainable building construction material as it is extremely durable, recyclable, and reusable. It allows for extraordinary design versatility, so it can meet both aesthetic and functional requirements. This course looks at the design elements, components, and construction techniques that characterize sustainable masonry cavity wall building envelopes.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In the last couple of decades, houses have become progressively more airtight due to energy efficiency and cost concerns. While air infiltration and exfiltration rates have been significantly reduced, the need for an efficient ventilation system has become extremely important. This course evaluates different types of mechanical ventilation systems and discusses why heat recovery ventilation (HRV) and energy recovery ventilation (ERV) systems are characterized by a high level of energy efficiency and as an effective means for improving indoor air quality.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 30 minutes ) 

    As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In food and beverage, food processing/distribution, and cold storage facilities, it is important to use doors that can provide speed, safety, separation, and security. High-speed, high-cycle, roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The specification criteria, design, and installation considerations for high-performance doors are also discussed.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course examines moisture control in wet-area assemblies, with emphasis on waterproofing materials, drainage components, and the details that connect them to surrounding construction. It explains how water moves through building assemblies and how waterproofing and drainage help protect materials that can be damaged by prolonged exposure. The course reviews the standards and testing methods used to evaluate performance and highlights detailing practices that help reduce the risk of leaks, mold growth, structural deterioration, and interior damage that can affect occupant health, safety, and welfare.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In designing successful interior building spaces that positively impact their occupants, it is critical to have knowledge of the principles of acoustics and noise control and link them to design methodology. This course explores these principles, with a special emphasis on common building types where acoustics and noise control are often required and noise can have detrimental effects on users, such as athletic facilities and performance spaces.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Le besoin d’évaluer les ponts thermiques dans la conception et le rendement d’un bâtiment a gagné en importance en raison des exigences grandissantes en matière d’efficience énergétique des bâtiments. Ce cours sert d’introduction aux ponts thermiques, aux exigences du code de l’énergie et à l’usage de barrières thermiques conçues pour améliorer l’efficience énergétique de l’enveloppe du bâtiment.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The operation of mechanical equipment generates vibration and noise, which, if left untreated, can damage the building structure and the equipment itself and be a source of discomfort for building occupants. This course examines HVAC equipment vibration and the specification of isolation solutions. It provides discussions on each of the ASHRAE isolator and base types and describes some acoustical floor treatments.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This introductory course on spray polyurethane foam (SPF) covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction, as well as safe SPF installation practices. Participants will come away with a strong knowledge of how the proper use and application of spray foam can improve the indoor environment and the durability of the built environment.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Moisture and soil gas beneath concrete slabs can cause a myriad of problems in both residential and commercial applications. The causes and consequences of these problems are reviewed in this course, along with a discussion on the types and characteristics of under-slab water vapor and soil gas barriers.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    The selection of windows and doors for a particular project must satisfy its aesthetic and functional requirements. However, we also want windows and doors to be safe, durable, leak-free, and energy efficient and meet the needs of those with disabilities. The International Building Code® and related standards ensure that windows and doors support public health, safety, well-being, and energy efficiency. This course provides an overview of the codes and standards for doors and windows, including weather resistance, durability, egress, safety, and accessibility requirements.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Large vertical openings can enhance the functionality, flexibility, and occupant experience of residential and commercial spaces, but their design requires careful consideration of the means of operation, safety, energy and acoustic performance, materials, and environmental conditions. This course examines vertical lifting door types, operating systems, safety features, performance considerations, and design options. It also explores strategies that support energy efficiency, thermal and acoustic comfort, indoor air quality, daylighting, and connections to nature and contribute to requirements in the LEED® v5 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C) rating systems and the WELL Building Standard™ version 2.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 15 minutes ) 

    Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the full-time inspector of record (IOR). We’ll review the historical context and qualifications of the IOR, when a project may benefit from an IOR, and the impact of using an IOR on life safety and property damage.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    This course examines threats to window and door integrity in buildings, including forced entry, ballistic impact, storm debris, and blast pressure. It covers retrofit and replacement approaches that strengthen glazing systems, explains relevant testing protocols, and addresses misleading performance claims. The course concludes with guidance on how to assess existing conditions and specify solutions that support occupant safety, risk mitigation, and building resilience.

    ASK A QUESTION
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Communities need accessible, versatile surfaces for play and relaxation for people of all ages and abilities. Modern landscape synthetic turf options are specifically formulated for public recreation spaces frequented by adults, children, and pets. This course reviews the health benefits of being outdoors, the history and fabrication of synthetic turf, the design considerations for various recreation applications, and synthetic turf’s performance and sustainability characteristics.

    ASK A QUESTION
    SAVE FOR LATER

Displaying 1 - 25 of 28 results.

FIRST [1-25] [26-28] NEXT LAST SHOW ALL