Building Knowledge and Connections
Displaying 1 - 25 of 53 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1009358/www.aecdaily.com/course/1034437
Paint in its various forms is an older material whose composition has constantly evolved, even in modern times. This evolution has included the identification and removal of certain hazardous ingredients. Similarly, paint removers have also evolved and improved their ability to deal with a wide range of old and new paint formulas while remaining safe for the occupant, the worker, and the environment at large. This course examines state-of-the-art nontoxic paint removers that are effective in removing as many as thirty coats of paint in one safe and efficient operation.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1178510
Concrete masonry units (CMUs) are made from dry-cast concrete, which uses less cement and sequesters carbon at a faster and greater rate than wet-cast concrete. This course begins with an overview of concrete products and the differences between dry- and wet-cast concrete, then explores the relationship between concrete and the carbon cycle, recent research into CMU sequestration rates, and the results of mini life-cycle assessments comparing different wall systems. Finally, some practical strategies for further reducing embodied carbon are reviewed.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1025181
While frequently chosen for aesthetics and durability, clay brick is not often considered when energy efficiency is a primary concern, even though it historically played a significant role in occupant comfort before the widespread use of HVAC systems. This course discusses the basics of heat transfer, relevant energy code provisions for walls, and how current research by the National Brick Research Center demonstrates the role that brick veneer can play in meeting or exceeding energy requirements in modern wall assemblies.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1166505
Segmental retaining walls (SRWs) are used in many landscaping applications, including small residential backyards and large commercial and transportation situations. This course provides an overview of segmental retaining wall systems and materials, including SRW terminology, soils, geosynthetics, general uses, and potential site issues. This program is best suited for those with little to no background in segmental retaining wall systems or materials or those desiring a refresher course in segmental retaining walls.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/839272
Concrete is often the substrate for both new and existing floors. Transforming the surface into a finished floor is far more sustainable than consuming additional flooring materials, adhesives, and transportation-related energy to install a floor covering. This course discusses the stages and options of the concrete polishing process, recognizes benefits of recent advances in concrete densification chemistry, and provides an overview of the limitations and possibilities for concrete floor finishes.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/903646
Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated.
https://redirect.aecdaily.com/s890910/www.aecdaily.com/course/959066
Hidden access covers blend utility access covers with the surface continuity of streetscape, hardscape, and landscape designs. This course reviews the functions, product types, and specification and installation considerations of hidden access cover solutions.
https://redirect.aecdaily.com/s1073957/www.aecdaily.com/course/1101030
Slate has been used for centuries as a long-lasting building material, and its natural beauty is unsurpassed. Today, rainscreen cladding systems have been developed to adapt natural slate to new architectural demands for sustainable building design approaches. This course explores the energy efficiency and moisture management benefits of a rainscreen system in combination with the durability and versatility of slate. The different designs and fastening systems are reviewed, and case studies demonstrate the advantages and possibilities for sustainable and beautiful slate projects.
https://redirect.aecdaily.com/s549530/www.aecdaily.com/course/563571
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes.
https://redirect.aecdaily.com/s9572/www.aecdaily.com/course/962747
Air barriers improve the health and comfort of building occupants, improve energy efficiency, and prevent premature degradation of materials, increasing the structure’s life cycle. A successful air and moisture barrier system means under-slab, below-grade, and above-grade systems must work together to provide a continuous barrier. This course looks at above-grade air barrier systems and their types and components. Continuity and compatibility, specification, and installation challenges are also considered.
https://redirect.aecdaily.com/s4860/www.aecdaily.com/course/1108432
Stucco is a popular and durable finishing material that offers many benefits, combining safety and affordability while satisfying aesthetic needs. It can be applied to various surfaces using a lath system, which provides support for stucco. However, the quality of the stucco lath embedment can greatly affect its performance. This course covers the proper technique for achieving lath embedment, the different types of metal lath and their various applications, and regional material preferences.
https://redirect.aecdaily.com/s671504/www.aecdaily.com/course/1172154
Stone has long been valued for its durability, reliability, and beauty. Today, natural thin stone veneer offers these benefits with reduced weight, cost, and environmental impact. This course explores its applications in commercial and residential settings, covering aesthetics, performance, and key specification standards. It also examines the sustainability profile of thin stone veneer compared to full natural and manufactured stone, highlighting an industry-wide LCA, responsible quarrying and processing, and how collaboration with fabricators can reduce environmental impact while preserving quality and design integrity.
https://redirect.aecdaily.com/s789181/www.aecdaily.com/course/990198
Concrete is an essential part of modern buildings. As net zero energy buildings become more common, it is crucial to find ways to reduce concrete’s carbon footprint without losing the performance characteristics that make it valuable to the building team. This course explains the sources of concrete’s carbon footprint and explores strategies for reducing embodied carbon and operational carbon in precast sandwich wall panels and insulated architectural cladding.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/895029
As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/977173
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements.
https://redirect.aecdaily.com/s7816/www.aecdaily.com/course/1009125
The inherent properties of concrete masonry, including strength, durability, and fire safety, have been well documented, though a perception of high cost persists. Due to significant changes to codes and standards that increased the flexibility of concrete masonry structural design, this construction method may also offer cost-effective and energy-efficient alternative solutions. This course reviews changes to ASTM C90 and the masonry design standard and includes a discussion on the benefits and opportunities these requirements bring.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/845810
The materials we use have a significant impact on the environment, our communities, and our health. Consequently, material transparency—wherein manufacturers disclose vital sustainability information about their products—is an increasingly necessary element of modern life. This course examines the tools and resources that are available for both manufacturers and the A&D community that effectively communicate transparency information and optimization of building products. Also reviewed are the benefits of the new-generation insulated metal panels (IMPs) designed to achieve a trusted range of health and wellness certifications.
https://redirect.aecdaily.com/s1131176/www.aecdaily.com/course/1148652
This course explores insulating concrete forms (ICFs) as part of a sustainable construction system by covering their benefits, applications, and design considerations. The course delves into the structural properties, energy efficiency, and environmental impact of ICFs. Also presented are best practices for integrating ICFs into various architectural projects and a concise overview of installation steps.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1056832
Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/1049838
This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, effective air sealing improves the durability of the structure and occupant comfort, health, and safety. This course includes a detailed look at sources of air leakage and the various methods available to address this infiltration. Several real-world examples demonstrate the importance of identifying the source of air leakage, investigating existing conditions, and proper detailing.
https://redirect.aecdaily.com/s707154/www.aecdaily.com/course/969691
Throughout history, concrete mixes and carved natural stone have combined to create substance, beauty, and longevity in our architecture. Glass fiber reinforced concrete (GFRC) was created to ensure that the attributes of concrete and stone continue to be enjoyed but with efficiency in the application that is expected in today's world of design. This course covers the creation of GFRC, its components, fabrication, applications, and design capabilities. It compares GFRC to other types of architectural concrete and presents GFRC performance and sustainable design advantages.
https://redirect.aecdaily.com/s792355/www.aecdaily.com/course/803054
Homeowners are looking for alternatives to traditional cladding materials that are affordable and long lasting and require little or no upkeep. Advances in technology and manufacturing techniques mean cellular PVC cladding products can meet all these requirements without sacrificing aesthetics. This course reviews the benefits of cellular PVC as a cladding material and discusses how cellular PVC rebutted and rejointed (R&R) prefinished shingles can provide the look and feel of wood shingles with an extended level of durability and low maintenance.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/938747
Le besoin d’évaluer les ponts thermiques dans la conception et le rendement d’un bâtiment a gagné en importance en raison des exigences grandissantes en matière d’efficience énergétique des bâtiments. Ce cours sert d’introduction aux ponts thermiques, aux exigences du code de l’énergie et à l’usage de barrières thermiques conçues pour améliorer l’efficience énergétique de l’enveloppe du bâtiment.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
