Displaying 1 - 25 of 91 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s12474/www.aecdaily.com/course/926173
In commercial, industrial, and parking structures, it is important to use doors that can provide speed, safety, separation, and security. High-performance roll-up doors provide all these elements better than conventional doors. This course provides an in-depth discussion of the different types of high-performance doors—fabric, rigid, and rubber—along with their benefits and functions in different applications. The design and installation considerations for using these doors are also discussed.
https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/1143565
Often the largest access point in a building, sectional door systems play a significant role in controlling energy costs and supporting sustainable design in residential and commercial buildings. This course explores the specification considerations and the different types of sectional garage doors, as well as their role in enhancing the thermal performance of homes and commercial buildings.
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/881135
The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines).
https://redirect.aecdaily.com/s1063446/www.aecdaily.com/course/1073090
Implementing daylight in buildings reduces artificial lighting energy, costs, and CO2 emissions and improves the welfare and performance of occupants. This course examines the benefits of daylight and explains how tubular daylighting devices (TDDs) can efficiently and effectively supply it in an energy-efficient manner, how they optimize all levels of daylight, and how they avoid issues such as glare and heat gain associated with windows and conventional skylights. Applicable credits and features in LEED® v4.1 Building Design and Construction, Interior Design and Construction, and Operations and Maintenance and the WELL Building Standard™ version 2 are noted. The course concludes with several sample commercial installations.
https://redirect.aecdaily.com/s10851/www.aecdaily.com/course/574010
Upward-acting commercial sectional door systems can be a major contributor to controlling energy costs in buildings. This course evaluates the materials and construction of various door types and discusses the selection criteria and operation features that are available to enhance door performance for a range of applications.
https://redirect.aecdaily.com/s614935/www.aecdaily.com/course/903662
Originally developed to reduce solar heat gain from entering through a pane of glass, window films in today’s market provide UV protection, reduce glare, reduce fading, increase occupant comfort, offer safety and security, and yield energy savings. This course evaluates the performance of different types of solar control window films and offers daylighting strategies for commercial, retail, and residential building and architectural applications.
https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/440742
Commercial fenestration products including sectional doors, rolling sheet doors, and rolling steel doors can improve building performance and provide essential building/opening protection. This course discusses common door features, hardware, insulation, installation, and optional types of electric operators, and evaluates the performance criteria required for a specific dock or drive through opening.
https://redirect.aecdaily.com/s1009066/www.aecdaily.com/course/1027559
Whether for new construction or a retrofit, doors and openings play an integral role in defining how a space functions and can impact occupants in multiple ways, making door selection an important process. This course discusses the many benefits sliding and pocket doors offer, including aesthetics, space savings, improved occupant flow, accessibility, and ease of operation. Typical sliding and pocket door hardware types, methods of operation, and installation are also reviewed.
https://redirect.aecdaily.com/s1096186/www.aecdaily.com/course/1100786
The war in Ukraine has left thousands living in substandard housing conditions, insufficient for winter weather. This course reviews a solution developed by a British engineer that addresses the pressing problem of delivering replacement windows in a war zone to improve thermal comfort in Ukrainian homes.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/869476
Resiliency is a growing necessity. It is important to understand the impacts on the built environment resulting from natural and manmade disasters and disturbances and to design for those impacts now. Presented in this course is an overview of the benefits of using steel doors as part of a resilient design strategy for applications requiring resistance to blasts, tornadoes, and ballistics.
https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1060033
Some building parts may see minimal human contact or weathering. Doors and entryways, however, need to be able to stand up to heavy use, frequent direct contact from building occupants, and environmental impacts. In this regard, FRP doors and frames offer robust strength, reliability, and durability. They provide project versatility and customization in colors and textures, are excellent thermal insulators, and allow for easier installation and lower costs in construction projects. This course outlines the FRP door and frame components, manufacturing methods, and types and discusses the benefits of FRP products.
https://redirect.aecdaily.com/s20166/www.aecdaily.com/course/912597
Research indicates that the quality of light directly affects the quality of life in a space; access to daylight and outdoor views promotes happiness and productivity. Reviewed in this course are the features of polycarbonate sheeting systems and how they contribute to energy-efficient daylighting design, as well as the overall health and well-being of the building occupants.
https://redirect.aecdaily.com/s858139/www.aecdaily.com/course/880596
In a riot, burglary, or active shooter event, the importance of keeping an armed intruder out of a building cannot be underestimated. Examined here are fenestration security risks, considerations, and solutions for educational, religious, commercial, and retail applications, as well as applicable performance testing and standards. The course provides an in-depth discussion on new, retrofit access-denial glazing systems that provide maximum protection against forced entry and ballistic threats.
https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1121597
Door systems are an integral part of educational facilities. This course discusses their importance in creating a safe and secure learning environment and explores the different types of doors, frames, and hardware components. Also covered are industry standards, compliance requirements for fire and life safety, accessibility, and security measures that enhance the safety of the door assembly. The course concludes with some practical applications and case studies in educational settings.
https://redirect.aecdaily.com/s1151436/www.aecdaily.com/course/1165305
In today’s rapidly evolving world, safety is a critical factor in architectural design. This course examines how fenestration systems enhance building protection through bullet resistance, fortified glazing, and advanced barrier solutions. Learn how potential threats influence the selection of these systems and how they integrate seamlessly into architectural projects.
https://redirect.aecdaily.com/s795432/www.aecdaily.com/course/1012262
The design of behavioral healthcare facilities should address the therapeutic and safety needs of patients and staff while meeting the applicable codes and regulations. Reviewed in this course are ligature-resistant products developed for patient rooms and bathrooms that strike the balance between providing the safest design solutions and creating a noninstitutional environment.
https://redirect.aecdaily.com/s504914/www.aecdaily.com/course/611973
Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course discusses the benefits of PL safety products and the codes and testing standards related to PL way-finding systems.
https://redirect.aecdaily.com/s1072115/www.aecdaily.com/course/1102478
Daylighting has traditionally been considered a functional way to bring natural light into building design. This course explores innovative applications of daylighting using various methods to deliver natural light into spaces and create visually appealing natural lighting as part of an overall design. It also examines daylighting strategies, considerations, and material options for successful project planning. By incorporating daylighting into projects, architects can create innovative environments that meet the sustainability goals of the building and the health, safety, and welfare needs of its occupants. Applicable credits and features in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2 are noted.
https://redirect.aecdaily.com/s15358/www.aecdaily.com/course/693296
Specifying the right sectional door system for your commercial project can have a great effect on the health, safety, and welfare of building occupants. This course covers commercial sectional door systems, including the various types of doors available and their associated characteristics including energy efficiency and durability, along with a discussion on how to specify the correct door to meet project requirements.
https://redirect.aecdaily.com/s13254/www.aecdaily.com/course/1047947
Secret doors and spaces have been used throughout history to protect valuables, hide people, conceal activities, and provide amusement. This course examines some historic examples before discussing contemporary uses for hidden doors and rooms. Suggested design strategies and hardware specifications are discussed, and safety guidelines, common design mistakes that might expose the existence of a secret door, and some inspirational case studies are reviewed.
https://redirect.aecdaily.com/s1034450/www.aecdaily.com/course/1087787
Corrosion is a significant concern for interior and exterior metal doors and frames, primarily due to the constant exposure to environmental factors like moisture, humidity, salts, and chemicals. Corrosion not only affects the aesthetics of these structures but also compromises their structural integrity and performance. This presentation reviews the causes, types, impacts, and treatments of corrosion in metal doors and frames. It examines how preventive measures related to materials and door design and construction inhibit corrosion, contributing to a durable, safe, and functional entryway and exit.
https://redirect.aecdaily.com/s17282/www.aecdaily.com/course/888035
Can commercial overhead doors contribute to the sustainability goals of buildings requiring garage, drive-through, fire, dock, and service products? To meet these goals, commercial sectional and rolling doors should be engineered to provide energy efficiency and personnel protection, and to mitigate fire and wind damage. This course examines the sustainable attributes of commercial overhead doors and explores their design potential in LEED® compliant projects.
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/957597
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s831648/www.aecdaily.com/course/849407
The Americans with Disabilities Act (ADA) applies to all state and local government agencies, commercial facilities, and public entities that have “places of public accommodation.” Presented in this course are the fundamentals of what accessibility means in terms of architectural door hardware specification. Topics include available hardware technology, the criteria for interior and perimeter access, and the codes and guidelines pertaining to the ADA requirements that affect door hardware selection.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
