Displaying 50 featured courses.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s19104/www.aecdaily.com/course/1056062
Good building envelope design provides a weathertight and insulated structure. However, additional attachments are often required for safety, aesthetic, or functional reasons. This course discusses the design and installation of snow retention systems and mounting systems for solar panels that maintain roof integrity, contribute to a long-lasting building envelope system, and support solar energy and safety.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1025181
While frequently chosen for aesthetics and durability, clay brick is not often considered when energy efficiency is a primary concern, even though it historically played a significant role in occupant comfort before the widespread use of HVAC systems. This course discusses the basics of heat transfer, relevant energy code provisions for walls, and how current research by the National Brick Research Center demonstrates the role that brick veneer can play in meeting or exceeding energy requirements in modern wall assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/969021
A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/1121832
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1125667/www.aecdaily.com/course/1152569
In this course, we will review the history and evolution of synthetic turf, the most popular applications, and various types of turf intended for different uses. We will also review synthetic turf installation basics, present some insight into the manufacturing process, explore recent innovations, and conclude with detailed specifications for selecting the right type of turf.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/869476
Resiliency is a growing necessity. It is important to understand the impacts on the built environment resulting from natural and manmade disasters and disturbances and to design for those impacts now. Presented in this course is an overview of the benefits of using steel doors as part of a resilient design strategy for applications requiring resistance to blasts, tornadoes, and ballistics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1051417/www.aecdaily.com/course/1061717
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/893368
An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/957597
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/899778
Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. Choosing the right insulation and putting it in the right location is becoming one of the most important decisions in design, construction, and retrofit. Reviewed in this course are the features, benefits, and design and installation considerations related to mineral wool continuous insulation.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/924606
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multistory building. Fire can spread not only from floor to floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and ASTM E2874.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062
Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1067507
This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water-resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. The course also addresses code compliance in light of recent material changes, code changes, and additional testing.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1119498
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/857032
It's time to stop thinking of only vertical pickets, horizontal rails, or glass panels when it comes to railing infill. Today's cable railing infill options are durable, versatile, attractive, low maintenance, easy to use, and virtually invisible. This course provides an overview of the advantages of stainless steel cable railing assemblies including frame design options and essential cable assembly components. It continues with a review of code requirements and concludes with a discussion of installation processes for custom cable assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/899008
Railings are often one of the most important parts of a deck or stair project because of the safety and security they provide, but they can offer character, style, and beauty as well as functionality. Today's railing systems present many possibilities to create a unique design perfectly suited to the project needs. This course examines high-strength, powder-coated aluminum railings, from code considerations to installation and maintenance. It presents the versatile, mix-and-match capability of finishes, top rail styles, lighting, and infill options that offer long-lasting, easy-to-install solutions for residential and commercial applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/1115032
Elevate your railing designs with a premanufactured system without compromising aesthetics or adaptability to site conditions. When you choose a manufacturer with design and engineering capabilities, you can customize premanufactured systems to meet safety standards AND enhance a project’s design. In this course, we discuss how a railing manufacturer helped three architects create unique solutions from premanufactured components.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7000/www.aecdaily.com/course/999504
Parking in buildings can be challenging to design because of space constraints. Automated parking lets architects design better buildings by maximizing parking capacity, using fewer resources, and providing a better parking experience for users. This course explains the different types of automated parking, their benefits and limitations, and what to consider when choosing automated parking for a project.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13250/www.aecdaily.com/course/909350
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s431285/www.aecdaily.com/course/1106562
Vinyl membrane decking can prolong the life cycle of various building components; however, performance and durability depend on vinyl membrane selection, specification, and installation. Fortunately, vinyl membrane manufacturers can support architects, contractors, and specifiers through all phases of the project to ensure a successful outcome. This course examines walkable, waterproof roof deck membranes and roofing systems and includes discussions on system characteristics, design considerations, and how to properly specify roof deck membrane systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s677063/www.aecdaily.com/course/897991
It is an expectation that today’s buildings have to be more than just aesthetically pleasing: they have to provide measurable environmental benefits. This course outlines how insulated concrete forms (ICFs) help meet sustainable design objectives and examines the advantages that ICFs and ICF technology have over conventional construction materials for building envelopes in all building types.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s677063/www.aecdaily.com/course/1104741
Designing beautiful, sustainable, high-performance buildings can help your structures leave a lasting impression and positive impact. Insulating concrete forms (ICFs) accomplish that while providing innovative design possibilities for single or multistory projects. Learn about the features and advantages of building with ICFs designed as a cost-effective, energy-efficient solution that offers substantial benefits over traditional construction methods.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s738062/www.aecdaily.com/course/886441
Today's gas fireplaces make a stylish, modern design statement while providing a safe and efficient option for supplemental heat. This course explores the benefits of direct vent, electronic ignition gas fireplaces over other fuel and venting options, with a focus on the innovative features and design possibilities offered by frameless fireplaces suitable for any residential or commercial space. The benefits of a frameless fireplace design, cool wall technology, a heat control system, and integration of the modern fireplace into a home automation system are discussed, and occupant safety features such as double glass heat safety barriers are explained.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s780799/www.aecdaily.com/course/974036
Elevators are integral to accessible, smooth, and efficient operations in many applications. For low-rise buildings, hydraulic elevators or gearless machine room-less (MRL) elevators are most common; this course compares the two in terms of sustainability and cost. Also presented are the history of the elevator, types of elevators suitable for installation in a range of buildings, the distinctions between proprietary and nonproprietary elevator systems, and recommendations on how to specify a nonproprietary system to maximize its long-term benefits.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/961769
Synthetic or artificial grass bears virtually no resemblance to its early version produced over fifty years ago. The current product is much more aesthetically pleasing, safer, softer, and durable, made with environmentally friendly materials, highly customizable to suit many indoor and outdoor uses, and recyclable and nonflammable. This course details the many sustainable attributes of this material; its benefits, construction, and certifications; and numerous sample installations.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/991722
The implementation of synthetic surfacing for leisure and performance applications is rapidly growing. Artificial materials such as synthetic turf (grass), synthetic green walls, and poured-in-place and court surfacing often outperform their natural counterparts. Additionally, increased safety standards and design expectations have accelerated innovation in the materials available to designers. This course outlines synthetic surfacing options and examines synthetic turf systems, detailing their design considerations, performance features, sustainability and health benefits, and associated return on investment (ROI).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1044992
Communities need accessible, versatile surfaces for play and relaxation for people of all ages and abilities. Modern landscape synthetic turf options are specifically formulated for public recreation spaces frequented by adults, children, and pets. This course reviews the health benefits of being outdoors, the history and fabrication of synthetic turf, the design considerations for various recreation applications, and synthetic turf’s performance and sustainability characteristics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967
As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1134203
As cities continue to grow, incorporating synthetic surfacing into rooftop spaces offers a safe, practical, and innovative solution to creating more livable, attractive, and resilient urban environments. The course explores synthetic rooftop surfacing, including its applications; environmental, health, and safety benefits; and product, manufacturer, and installer certifications. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1009358/www.aecdaily.com/course/1034437
Paint in its various forms is an older material whose composition has constantly evolved, even in modern times. This evolution has included the identification and removal of certain hazardous ingredients. Similarly, paint removers have also evolved and improved their ability to deal with a wide range of old and new paint formulas while remaining safe for the occupant, the worker, and the environment at large. This course examines state-of-the-art nontoxic paint removers that are effective in removing as many as thirty coats of paint in one safe and efficient operation.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1021711/www.aecdaily.com/course/1044026
Anytime a facility has people working on a roof, their safety and protection must be the priority. Even under the best conditions, working on a rooftop is dangerous due to the roof’s elevation, slope, and edge, as well as other hazards created by weather conditions, electricity, and power tools. This course reviews the hazards of the rooftop environment and the relevant Occupational Safety and Health Administration (OSHA) regulations to aid designers, property owners, and facility managers in selecting safe access and fall protection systems for their buildings.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1049844
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1043551/www.aecdaily.com/course/1065168
The fireplace has always been a focal point in any home, providing warmth and a place for friends and family to gather. Today’s wood-burning fireplaces, inserts, and stoves have become increasingly efficient and clean burning. This course examines using wood as a fuel source and discusses the many characteristics that can affect heat production, efficiency, and burn time. New burning technologies that meet EPA certification requirements for released particulate matter are summarized, as are design and installation specifications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1101245/www.aecdaily.com/course/1111000
Incorporating sustainable building materials into design practices is essential for creating environmentally responsible, healthy, and resilient built environments. Thermal modification is a tested and proven chemical-free process for increasing the dimensional stability and long-term performance of wood while preserving its natural beauty. Presented are the thermal modification process, the attributes, applications, and favorable environmental impacts of thermally modified wood, and how thermally modified wood can contribute to achieving certification in LEED® v4.1 Building Design and Construction and Interior Design and Construction, Sustainable SITES Initiative® v2, the WELL Building Standard™ version 2, and the Living Building Challenge (LBC).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1103477/www.aecdaily.com/course/1114079
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/959390
Sound control is a critical element in a building’s design. We all think of the walls, ceiling, and floor when discussing sound attenuation, but without the proper acoustic door, the sound-control goals in an acoustic plan may not be met. This course reviews healthy sound levels and how to test and identify target STC ratings. Also discussed are the elements of acoustic door assemblies and how they address fire ratings and ADA compliance, contribute to LEED® certification and green building, and provide security for classified files and electronic data.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5057/www.aecdaily.com/course/888587
Building owners value daylighting and views but face security and safety challenges with large amounts of glazing. Thermoplastic sheet products offer a variety of glazing solutions that resist security threats while providing transparency, strength, and durability. This course introduces the grades and characteristics of acrylic and polycarbonate sheet products and discusses how they meet the requirements for protection against forced entry and ballistics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s18665/www.aecdaily.com/course/931898
The durability of a home is affected by how well it is protected from moisture. This course reviews the methods of preventing and managing moisture in walls, the installation considerations of moisture management products, and the required tests and acceptance criteria for water-resistive barriers.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s749821/www.aecdaily.com/course/1033512
Not only is standing seam metal roofing (SSMR) robust and durable, but the seam itself also provides a convenient anchorage point for the mounting of rooftop equipment. This course reviews the features and advantages of SSMR in terms of durability and sustainability, and the appropriate attachment solutions for mounting equipment. The course focuses on nonpenetrating roof seam clamps and design considerations for their use with snow retention and solar panel systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s859/www.aecdaily.com/course/935794
Fixed access ladders are a part of almost all commercial buildings, and yet their design and installation are often ignored or forgotten until the last stage of building inspection. An improperly designed and installed ladder can lead to safety concerns for the building's occupants. This course reviews different types of fixed access ladders and the corresponding safety codes and standards that ensure users' welfare. Ladder design features and materials required for safe fabrication and installation are discussed and various case studies are examined.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1633/www.aecdaily.com/course/986550
Architectural precast concrete products are versatile, sustainable, affordable, and resilient. This course examines the advantages of building with them and discusses the production process, unique characteristics, and installation of architectural precast concrete’s three main product groups.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2451/www.aecdaily.com/course/923199
Birds, bird droppings, and nesting materials can detract from buildings' architectural features; more importantly, they can negatively impact the environment by creating health and safety risks. Eliminating a bird problem requires a strategic combination of preventive measures and proven bird control products. This course explores the characteristics of common birds, bird problem assessment, and the solutions designed to deter the roosting and nesting of pest birds.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2527/www.aecdaily.com/course/1022095
The Americans with Disabilities Act (ADA) sets the minimum requirements for newly designed and constructed or renovated state and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities. Many projects must also follow the provisions of the 2017 version of ICC A117.1, Standard for Accessible and Usable Buildings and Facilities . This course identifies the benefits of accessibility standards and the prescriptive requirements for accessible restrooms set by the ADA and ICC A117.1.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/826168
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/869438
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum thermal performance.