Threat Mitigation: Protecting People and Property ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1151436/www.aecdaily.com/course/1165305

In today’s rapidly evolving world, safety is a critical factor in architectural design. This course examines how fenestration systems enhance building protection through bullet resistance, fortified glazing, and advanced barrier solutions. Learn how potential threats influence the selection of these systems and how they integrate seamlessly into architectural projects.

Introduction to Architectural Paving & Segmental Retaining Walls ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s14751/www.aecdaily.com/course/957549

Paving products comprise an important part of both the functionality and aesthetic of exterior spaces, including urban plazas, streetscapes, walkways, patios, and amenity spaces. This course provides an overview of architectural paving and segmental retaining walls (SRWs) as two primary applications of hardscaping products in these spaces. The course introduces architectural paving and its components, manufacturing, and products and then focuses on the benefits, construction, and available types of SRWs. Case study examples of both architectural paving and SRWs are provided to engage and inspire learners as to the applications, functionality, and aesthetic possibilities of hardscaping products.

Acoustical Concepts ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s907623/www.aecdaily.com/course/922905

The acoustical comfort level in the workplace is a key measure of the quality of the indoor environment for building occupants. This course explores key concepts and characteristics of sound, as well as speech intelligibility and privacy and their associated acoustical remedies. Also presented is the use of sound absorbers and diffusers as acoustical solutions to noise problems.

Adapting Water Management to Evolving Conditions: Part 2 ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1110658

Water management is a complex and significant process affecting all levels of planning and building design and is tasked with solving a number of new and emerging issues. This course reviews current stormwater and wastewater management issues and current practices and then takes a look at a number of new and emerging issues that water management plans need to address.

Thermoplastic Roofing: Materials & Systems ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5147/www.aecdaily.com/course/853451

Roofing technologies have come a long way from labor-intensive BUR systems that achieved watertightness through redundancy. Today’s single-ply membranes are thin, light and reliable, and installation is safe and efficient. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations as well as the important factors to consider when selecting a roof system, ranging from fastening techniques to warranties to sustainability.

New Technologies for Tiling Decks and Balconies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/975033

Outdoor living space has become an important residential design consideration in the last several years. Decks create welcoming spaces to relax and entertain with family and friends, and a well-built deck can add more living space and value to a home. This course discusses deck surfaces, maintenance, and costs and explores porcelain tile as an alternative to wood and composite deck surfaces that is well suited to exterior environments. Also discussed is how porcelain tile can be used with a new pultruded fiberglass and composite underlayment, called structural ribbed self-supporting boards, and the sustainable features of this technology.

Thermal Breaks in Cladding Support Attachment Assemblies (Recorded Webinar) ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s988795/www.aecdaily.com/course/999840

Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm.

Standing Seam Metal Roofing: Prepainted Architectural and Structural Panel Systems ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/969021

A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.

Colored Concrete: Why Design With It, Why Specify It ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13218/www.aecdaily.com/course/938725

Color is often used functionally across many design elements; this can also be done with concrete by simply dosing standard concrete mix designs with pigment. Using pigment, concrete can be transformed from a plain, common material into a beautiful, sustainable, and enduring building element. Adding pigments to concrete elevates a project's quality and impact. This course presents basic knowledge of how concrete pigments are manufactured and how they are measured and dispensed to produce the desired color hue and intensity capable of elevating a project to the next level.

Pest Bird Deterrent Solutions ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s2451/www.aecdaily.com/course/923199

Birds, bird droppings, and nesting materials can detract from buildings' architectural features; more importantly, they can negatively impact the environment by creating health and safety risks. Eliminating a bird problem requires a strategic combination of preventive measures and proven bird control products. This course explores the characteristics of common birds, bird problem assessment, and the solutions designed to deter the roosting and nesting of pest birds.

Demystifying EPDs in Sustainable Design ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1051417/www.aecdaily.com/course/1061717

Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®).

Decorative Beams, Panels, Truss Systems, Mantels, and Column Covers ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s981888/www.aecdaily.com/course/999635

Adding wood, stone, or masonry accents can dramatically change the look of a space, but time, cost, or even structural requirements can interfere. This course reviews the use of realistic, lightweight, cost-effective, and easy-to-install options for decorative faux elements. The performance, design options, and installation of high-density polyurethane panels, beams, truss systems, mantels, and column covers are examined.

Snow Management Systems: Form Follows Function ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s783922/www.aecdaily.com/course/1055654

Installing snow retention systems on rooftop applications improves the safety of building occupants and can decrease the risk of property damage. This course identifies different snow guard styles and explains how each contributes to snow retention. Installation techniques are reviewed, and layout designs that maximize occupant safety and minimize hazards are also discussed.

Secret Spaces: Designing Hidden Entrances with Invisible Hinges ( ~ 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s13254/www.aecdaily.com/course/1047947

Secret doors and spaces have been used throughout history to protect valuables, hide people, conceal activities, and provide amusement. This course examines some historic examples before discussing contemporary uses for hidden doors and rooms. Suggested design strategies and hardware specifications are discussed, and safety guidelines, common design mistakes that might expose the existence of a secret door, and some inspirational case studies are reviewed.

Vegetative & Protected Roof Membrane Assemblies: What Lies Beneath ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062

Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.

Defining Spaces for Synthetic Turf: Applications, Installation, and Specification ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1125667/www.aecdaily.com/course/1152569

In this course, we will review the history and evolution of synthetic turf, the most popular applications, and various types of turf intended for different uses. We will also review synthetic turf installation basics, present some insight into the manufacturing process, explore recent innovations, and conclude with detailed specifications for selecting the right type of turf.

Sliding Door Locking Solutions for Commercial Spaces ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s452302/www.aecdaily.com/course/1114751

The use of sliding doors in commercial applications is increasing at an exponential rate as facilities embrace the ability to reclaim previously unused space and create wider paths of travel. This course is designed to provide architects, designers, and specifiers with a comprehensive understanding of sliding door locking solutions in commercial spaces and the role of door hardware in ensuring safety, security, and accessibility. By analyzing case studies and exploring the features and benefits of sliding door locking solutions, participants will be able to make informed decisions when specifying sliding door systems for commercial spaces.

Engineered Nonproprietary Elevator Solutions ( ~ 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s780799/www.aecdaily.com/course/974036

Elevators are integral to accessible, smooth, and efficient operations in many applications. For low-rise buildings, hydraulic elevators or gearless machine room-less (MRL) elevators are most common; this course compares the two in terms of sustainability and cost. Also presented are the history of the elevator, types of elevators suitable for installation in a range of buildings, the distinctions between proprietary and nonproprietary elevator systems, and recommendations on how to specify a nonproprietary system to maximize its long-term benefits.

Spray Polyurethane Foam (SPF) Applications and Safety ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s356556/www.aecdaily.com/course/1003714

This course aims to educate learners about the chemistry of spray-applied polyurethane foam (SPF), its various applications in the construction industry, safe handling and installation, and its contribution to sustainable design. The advantages of using SPF are highlighted in terms of its benefits to energy conservation and fire safety. Its role as a high-performance air barrier that satisfies code and LEED® criteria and complies with various standards is also discussed.

Sustainable Building Envelope Performance with Self-Sealing Fasteners & Anchors ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1075056/www.aecdaily.com/course/1110425

Sustainable building envelopes demand high performance from and proper installation of continuous insulation and air, water, and vapor control layers. What happens when thousands of holes are made in these materials as they are installed with blind fasteners, one layer on top of another by different subcontractors? Sequencing issues can generally not be avoided; instead, this course focuses on self-sealing fasteners as a solution to avoid damage and thermal bridging in insulation and control layers. Various fasteners and anchors are described, and recommendations are presented for how to specify and what testing data to look for.

Structural Steel: Sustainability & Fireproofing ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s753464/www.aecdaily.com/course/844146

With the ever-increasing focus on the sustainable built environment, building owners, architects, engineers, and contractors are incorporating structural steel into their designs. Presented here is a comprehensive view of the cradle-to-cradle structural steel supply chain from a sustainability perspective. Also discussed are steel production and design, steel’s potential contribution to LEED v4 credits, thermal capacity, and the environmental and life cycle benefits of prefabricated fireproof steel columns.

Lessons in Paint Technology, and LEED® Requirements for a Sustainable Future ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s5089/www.aecdaily.com/course/1046540

Sustainable design and green practices have raised consumer awareness about the potential dangers lurking in buildings and homes from products such as paints and coatings. Environmental sustainability has influenced architects and interior designers to approach their projects in ways that boost health, lower consumption of nonrenewable resources, and minimize waste. This course looks at the evolution of sustainable design, ways to measure the environmental impact of volatile organic compounds (VOCs), how paints and coatings can contribute toward satisfying LEED® credits, and how these products may play a role in designing for well-being.

Current Approaches to Sustainable Community Planning, Part 1 ( ~ 1 hour, 15 minutes ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/968977

The tools, techniques, and approaches to sustainable community planning (SCP) have evolved substantially in the last few decades, turning it from an abstract notion into a most comprehensive and beneficial planning approach. Part 1 of this two-part course examines the basic principles that these tools and approaches are based on, the local and global issues that they must address to be effective, and the nature and structure of the tools themselves. The review includes numerous links to the sources of these tools.

Noise Control for Floor-Ceiling Assemblies ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/1068347

The demand for noise control is increasing due to a growing population, greater expectations of sound privacy, and an increasing awareness of the harmful effects of noise pollution. Noise control is a key component of design because it affects occupant privacy and well-being. This course reviews the design of floor-ceiling assemblies to improve acoustics and occupant wellness.

Specifying the Correct Floor for Dance and Performing Arts ( ~ 1 hour ) 

Take This Course Mobile!

Scan this code with your mobile device camera to take this page on-the-go!

https://redirect.aecdaily.com/s1217/www.aecdaily.com/course/1107482

Dancers and performers require a safe performance environment that minimizes the risk of injury. Hard sports floors and multipurpose stages have a strong risk of causing severe dance injuries that can affect a performer’s career. Choosing the wrong type of floor also carries the risk of extra costs down the road if it requires replacement. Sprung floors (also known as floating floor systems) are specifically designed for dance and other performance needs and provide a safer space to work. This course looks at the advantages of sprung floors and how they are used in performance venues.