Assesses the urban environmental issues of stormwater runoff and heat islands and describes how their damaging impacts can be mitigated by blue, white, and green roofs. The considerations and additional benefits of each roof type are also discussed....
The perimeter roof edge is the first line of defense against wind events and costly issues. Learn about why using a proper perimeter roof edge system is critical....
Wood is not only visually appealing; it plays a vital role in shaping acoustics. This course examines the acoustic properties of wood and its applications in wood-based architectural solutions, focusing on how acoustic wood products can help control noise in commercial and residential environments. Also reviewed is how these products support sustainable design objectives, including their role in meeting the criteria of the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems, as well as the WELL Building Standard™ v2. The presentation features design strategies and case studies that illustrate the effectiveness of acoustic wood products in achieving superior performance....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
A high-performance building envelope, such as one made with architectural insulated metal panels (IMPs), serves as the building’s primary defense against environmental elements and protects the health and well-being of its occupants. This course reviews the components and benefits of IMPs, which offer all four control layers—air, vapor, thermal, and water—within a single component, delivering superior thermal performance and high-end design....
This course explains the design of adhered masonry wall systems typical of today’s best practices. It utilizes familiar masonry cavity wall design to show why proper ventilation and drainage typical in this wall type must also be used in adhered masonry veneer wall design, and explores the design differences and similarities between masonry cavity wall systems and adhered masonry veneer systems. It shows the results of improper wall design, common errors in adhered masonry installation techniques and product selection, and the correct techniques and products necessary for constructing sustainable, energy-efficient adhered masonry veneer walls that will remain free of water damage for the life of the building....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
This is a Product SpotLight Presentation. Want spring performance without the complexity? Learn how the RSIC®-ADAPT works, where it excels, and why it’s the next revolution in high-performance sound isolation. Whether you’re an architect, engineer, contractor, or acoustics professional, this session focuses on the key benefits, real-world applications, and performance advantages that make RSIC®-ADAPT a game-changing solution. Spring performance with the installation simplicity of RSIC-1....
At their root, metal roofs and walls made from steel, copper, zinc, or aluminum have a lower environmental impact because of their ability to be recycled and reused. This course focuses on the green aspects of standing seam metal roofs, and in particular, their cool roof characteristics. Also addressed are the implications of heat islands, what constitutes construction of cool roofs/walls and how they work, some rules of thumb for understanding cool metal roofing, roof slope impacts on performance, and codes, ratings, and standards that apply to designing cool roofs/walls....
Roofing technologies have come a long way from labor-intensive systems that achieved water tightness through redundancy. Today’s single-ply thermoplastic membrane systems are lightweight, consistently manufactured, and efficient to install. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations. It also identifies the important factors to consider when selecting a roof system, including fastening techniques, warranties, safety, and sustainability....
As more companies invest in solar to generate clean power for their operations, meet environmental goals, or save money on electrical bills, architects and building owners may need to be prepared to accommodate rooftop photovoltaic (PV) systems in both existing and new buildings. This course provides an introduction to rooftop PV systems, including a discussion of modules, components, and attachments, and best practices for a durable roof and PV system....
This course introduces expanded polystyrene (EPS) underslab insulation and examines its role in energy performance, moisture management, thermal control, vapor management, radon mitigation, and hydronic heating in residential and commercial buildings. The course supports project teams working toward LEED® v5 Building Design and Construction (BD+C) or Interior Design and Construction (ID+C) requirements by outlining how underslab insulation decisions influence compliance with thermal envelope provisions, energy modeling pathways, and material considerations within the rating systems....
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
A high-performance building envelope, such as one made with architectural insulated metal panels (IMPs), serves as the building’s primary defense against environmental elements and protects the health and well-being of its occupants. This course reviews the components and benefits of IMPs, which offer all four control layers—air, vapor, thermal, and water—within a single component, delivering superior thermal performance and high-end design....
The performance and durability of a roof are critical to the health, welfare, and safety of both building occupants and the building itself. This course examines the construction, materials, and best detailing practices that ensure the proper long-term performance of steep-pitch roofs. It describes and details layout options for assemblies of steep-pitch roofs and the key characteristics of roofing systems that help to prevent roof deterioration and damage. It then highlights best practices in detailing and constructing steep-pitch roof systems that mitigate water, ice, snow, fire, or wind damage to the roof....
This program compares the choices for single ply roofing attachment based on the materials, energy considerations, goals of installation, and weather considerations. It reviews legacy attachment methods and discusses newer potentially more cost effective and less weather sensitive options....
Modular metal panels (MMPs) integrate advanced technology with modern aesthetics, providing high-performance building envelopes that enhance design and durability. This course explores the evolution of MMPs and what distinguishes them from other building products. You will examine the key components that make up the system and its fundamental principles and best practices. Finally, the course demonstrates how these elements combine in real-world applications, showcasing various design options....
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. Now, in the wake of implementing pandemic protocols, our acoustic comfort in these spaces is greatly challenged. This course examines the impacts of poor soundscapes in educational facilities and introduces innovative solutions for improving acoustics in these areas while keeping us comfortable and safe from exposure to emerging viruses....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
A comprehensive plant tour at our Rmax Facility. Observe the insulation manufacturing process step by step from the initial order to the finished product by observing the raw material used, the manufacturer of the panels on the production line, panel cutting and stacking, panel wrapping and storage....
View the Rmax - A Division of the Sika Corporation Course Library
Wall system applications are becoming more and more common in the building envelope industry today. Explore the science behind wall systems and the tangible benefits of incorporating this technology into building structures. There is an emphasis on the differences between air barriers that are impermeable to vapor drive and air barriers that are vapor permeable and which is the best in each climate and wall assembly....
Design guidelines for sustainable MVM buildings, Including product innovations and industry related education....
Provides an overview of the performance characteristics and benefits of using multi-layer, cellular PVC decking—a durable decking material that replicates the unique beauty of exotic hardwood....
The course is designed to teach attendees the differences between the insulation used in insulated vinyl siding....
Having an up to date specification starts with understanding what is in the building code. This course reviews the requirements that steel framing must meet to be compliant to IBC 2021. It covers the standards for manufacturing tolerances, minimum thickness and protective coatings. Participants will also review fire-rated partitions...
Displaying 101 - 125 of 526 results.
FIRST PREV [51-75] [76-100] [101-125] [126-150] [151-175] NEXT LAST