The planet is currently in a water scarcity crisis which is significantly affected by toilet water usage. This course examines the current plumbing codes, standards, and regulations that address toilet water usage, the need for, and benefits of, going beyond current standards as well as the goals of a variety of beyond the code voluntary standards and rating systems. It explains the various types of low and ultra-low flow toilets, their pros and cons, and their selection criteria. It concludes with a sampling of successful cost and water-saving installations....
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification....
View the ASSA ABLOY Entrance Systems Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285....
View the North American Modern Building Alliance Course Library
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
Discover the correct selection, specification, engineering, and design process to create safe and permanent roof attachments for various needs. Learn how to properly identify rooftop thermal cycling and manage the correct installation process. Identify correct installation practices of any rooftop penetration to maintain weathertightness warranties. Learn how to meet local and national building code requirements and other safety specifications for various rooftop accessories. Discover the ease of installing rooftop safety equipment and accessories safely without voiding roof manufacturer warranties on metal roofs....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
This course offers detailed information about modern redwood timberland management approaches that contribute to the species’ long-term sustainability as a building material. The course also provides insight into how third-party certification helps the redwood industry communicate environmental stewardship. The course details how wood is created through the process of photosynthesis and how carbon is sequestered long-term in wood products, drawing a connection between sustainably sourced redwood lumber products and the ability to achieve carbon-neutral standards. Lastly, the course defines redwood grades and performance characteristics and describes how these properties achieve building code acceptance....
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance....
View the Western Wood Preservers Institute Course Library
Western Wood Preservers Institute
This course is part of one or more "Course Collections". Click here to view the details.
Vacuum insulation panels (VIP) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R Values for the enclosures required by the energy codes without having to increase the thickness of walls roofs or floors. This course discusses how VIPs work, why they are effective and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIP's as thermal insulation in the design of energy-efficient buildings...
View the Panasonic Industrial Devices, Building Materials Group Course Library
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum thermal performance....
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly. This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions . You will receive credit for taking only one of these courses. ...
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection....
View the DuPont Performance Building Solutions Course Library
Fire safety and suppression are essential design features for building projects. This course explores how innovative water mist fire suppression systems can enhance occupant safety in homes while preserving aesthetics and minimizing water damage. Key design principles of electronically controlled water mist systems are examined, and their installation and maintenance are described. Also discussed is guidance for dealing with code officials when using these systems as an alternative to traditional fire sprinklers....
View the Plumis Manufacturers of Automist Course Library
Plumis Manufacturers of Automist
This course is part of one or more "Course Collections". Click here to view the details.
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants....
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements....
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties....
The 2024 International Energy Conservation Code (IECC) fundamentally shifts how the thermal performance of building enclosures is designed and evaluated. In the 2024 IECC Chapter 4 Commercial Energy Efficiency, compliance now requires design teams to account for linear and point thermal bridging, as does ASHRAE 90.1-2022, which is incorporated by reference. This impact will notably change how design professionals consider typical building details like parapets, cladding attachments through continuous insulation, window perimeters, and more. Through a side-by-side review of previous and current requirements, this course will bolster design professionals’ understanding of the steps needed to address thermal bridges and how to incorporate these results in prescriptive path, performance path, and COMcheck compliance calculations. By examining the updated air leakage testing requirements codified in the 2024 IECC, professionals will learn to decipher whether whole-building air leakage is mandatory or if the air barrier design and verification approach will apply to their project. This course will explore the practical impacts of the new energy code requirements, reveal strategies for meeting compliance, and share tools that can help design professionals stay ahead in a rapidly changing energy code landscape. This course welcomes both new and experienced design professionals alike. Those with a basic understanding of building enclosure-related heat transfer and fundamental calculation methods will benefit most from this course....
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality....
Discover the characteristics, benefits and design options for commercial and industrial buildings using insulated metal panels (IMPs). Recognize the factors affecting panel spans and the relationship of these to structural supports. Gain knowledge of IMP code compliance....
With the global rise in natural disasters and the increasing need for sustainable environments, resiliency has become a necessity in the design and building industries. This course provides an overview of resilient design, how it relates to building codes and standards, and the role it plays in ensuring the safety and sustainability of the built environment. It examines the role masonry construction plays in meeting resilient design goals and the inherent properties of masonry that make it resilient and provides examples and case studies of resilient design strategies....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Dual-flush wall-mounted toilets help create modern, stylish bathrooms that strike a balance between sustainable water efficiency, flexible design, and space savings. This course compares this style with other traditional types of toilets, discusses how wall-mounted toilets benefit commercial and residential users, and explains how they satisfy the Americans with Disabilities Act (ADA) and other accessibility and building code requirements....
The demand for mass timber construction has increased significantly in recent years due to its numerous benefits, including sustainability, strength, faster construction times, cost savings, and a natural wood aesthetic. However, a major drawback of mass timber construction is its poor acoustical performance. This course examines the various mass timber construction types and provides acoustical solutions to meet and surpass building codes....
Single-skin metal roofing systems combine structural efficiency with verified wind, fire, and energy performance. This course examines how panel profiles, substrate metals, coatings, and fastening methods contribute to building durability and environmental performance. Learners explore industry standards, testing protocols, and detailing strategies that support code compliance and optimize long-term results. The program also addresses fabrication quality, installation practices, and warranty provisions that influence life-cycle value and alignment with green building objectives under the LEED® v4.1 Building Design and Construction rating system....
Displaying 105 - 129 of 356 results.
FIRST PREV [55-79] [80-104] [105-129] [130-154] [155-179] NEXT LAST