Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
The federal government, more and more states and local jurisdictions are enacting regulations and building codes mandating the installation of solar PV or solar-ready design on new building construction. This will result in an accelerated growth of rooftop solar with an intent to reduce costs and maximize the energy output of solar installations. The key to complying with solar mandates is mastering solar and building integration. This means considering the roof and solar as a single system, as well as non-traditional design elements focused on the anticipation of rooftop solar installations. All structural analysis must include all the system elements and full load path, including solar mounting systems and roof structures. And finally, a look at case studies, storms and testing....
As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285....
View the North American Modern Building Alliance Course Library
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
The selection of windows and doors for a particular project must satisfy its aesthetic and functional requirements. However, we also want windows and doors to be safe, durable, leak-free, and energy efficient and meet the needs of those with disabilities. The International Building Code® and related standards ensure that windows and doors support public health, safety, well-being, and energy efficiency. This course provides an overview of the codes and standards for doors and windows, including weather resistance, durability, egress, safety, and accessibility requirements....
View the Pella Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Explore specialized materials, code compliance, and the unique environmental demands of mission-critical facilities to optimize energy efficiency and building resilience. Learn about the unique fire risks and environmental demands of data center operations. Evaluate how product solution choices affect energy efficiency, installation, maintenance, and risk management....
3M - Building Protection - Air Barrier, Fire Barrier, and Insulation Moisture Barrier/Jacketing
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques....
Discover the science of wind uplift; how it is changing. Learn how the changes are impacting codes and roof material choices. Learn about testing and specification techniques for metal roof options and accessories to improve wind uplift resistance providing a safer building at a lower cost....
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
Helps provide the design community with a better understanding of the model energy code requirements for insulation in metal buildings, how codes are changing, including requirements for continuous insulation and air barriers along with considerations when selecting the right insulation....
View the DuPont Performance Building Solutions Course Library
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of materials classified by the IBC requiring NFPA 285 testing is increasing. Combined with more stringent energy code requirements, the use of combustible materials is also growing in exterior walls. The most common contributing factors to non-compliance of designs requiring NFPA 285 assembly testing include: −Lack of understanding of applicability of test on exterior wall assemblies. −Recent building and energy code changes causing new triggers for the test. −Lack of understanding of assembly vs. product results for NFPA 285 tests. This seminar will discuss the impact of the NFPA 285 Test on buildings using IBC-2018, the parameters and history of NFPA 285, which building envelope components are combustible and require NFPA 285 testing per IBC, and the paths to NFPA 285 code compliance that a designer can take. These elements all combine to integrate NFPA 285 compliant assemblies into building envelope systems....
View the DuPont Performance Building Solutions Course Library
This presentation includes information on continuous insulation performance and specific detail on polyisocyanurate insulation, an overview of the history of foam plastic insulation in the building codes, and a detailed review of the 2021 International Building Code’s fire safety requirements for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I-IV), including the NFPA 285 fire test standard....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes....
View the Pacific Stair Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed....
The use of life safety dampers is driven by requirements in various building codes. There are many different applications for which fire, fire/smoke, smoke, and/or ceiling radiation dampers can be used, each having its own specific purpose and unique installation requirements. This course gives an in-depth look at the different types of dampers and explains how and where they're each used and installed....
View the Mestek Commercial Damper and Louver Group Course Library
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance....
How to Achieve Superior Building Envelope Performance in Rainscreen Wall Design explores rainscreen wall design theory, how rainscreen walls control hygrothermal loads, and shortcomings of today’s multi-component backup wall assemblies used in rainscreen wall construction. The course will compare and contrast the common multi-component backup wall assembly with the single-component insulated metal composite backup wall system, and demonstrate how the latter overcomes deficiencies of the former in creating a building envelope with superior performance as well as other key benefits....
Restrooms and other plumbing applications must comply with accessibility regulations, but do you know exactly how to do that? This course is a handy reference that explains what codes and regulations you must satisfy, when those requirements apply to new construction and alterations, and how to select and install fixtures to meet accessibility standards and the requirements of the LEED® v5 for Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
View the Zurn Elkay Water Solutions Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Learn how Spray Polyurethane Foam (SPF) insulation can be safely used in California residential construction to optimize cost efficiency while complying with Title 24 energy code and improving comfort, durability, and strength of homes and buildings....
What are you doing to address the urban heat island effect? This hot topic in the design industry has led to local governments following LEED and amending their building codes to combat the effect of traditional roofing materials. In this session, you'll discover materials and techniques that will help you bring sustainable roofing into your practice - meeting both the latest building codes and the demands of increasingly eco-conscious clients. Discover how "cool roofing" and "green roofing" can help elevate sustainability while also maintaining performance and controlling costs....
Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considerations and embodied carbon; and key considerations for choosing the right trim. Finally, the course applies these concepts to several design scenarios and identifies the appropriate trim option for each....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations. ...
The purpose of this course is to educate architects and designers on the ideal ways of incorporating entrance flooring into commercial buildings to promote a safe and clean environment. The course explains codes, regulations and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate and other commercial settings....
Displaying 106 - 130 of 358 results.
FIRST PREV [56-80] [81-105] [106-130] [131-155] [156-180] NEXT LAST