As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Modern roof systems and envelope assemblies (both commercial and residential) may need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the building envelope has an important role to play, including the insulation layer. This presentation introduces the key benefits and attributes of polyiso roof insulation products, polyiso continuous insulation products used for above grade wall assemblies and below grade applications, and continuous insulation products used as part of residential envelope assemblies (steep slope roofs, above grade walls, and below grade foundation). Topics covered include: • Designing building and energy code-compliant roof assemblies and commercial and residential envelope assemblies. • Solving performance challenges like ponding water on roofs. • Solving performance challenges like thermal bridging and managing the threat of moisture and air intrusion in commercial and residential building envelope assemblies. • Reducing the environmental impacts of buildings with roof systems and envelope assemblies that contain polyiso insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the full-time inspector of record (IOR). We’ll review the historical context and qualifications of the IOR, when a project may benefit from an IOR, and the impact of using an IOR on life safety and property damage....
View the AEC Daily Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Modular metal panels (MMPs) integrate advanced technology with modern aesthetics, providing high-performance building envelopes that enhance design and durability. This course explores the evolution of MMPs and what distinguishes them from other building products. You will examine the key components that make up the system and its fundamental principles and best practices. Finally, the course demonstrates how these elements combine in real-world applications, showcasing various design options....
Restrooms and other plumbing applications must comply with accessibility regulations, but do you know exactly how to do that? This course is a handy reference that explains what codes and regulations you must satisfy, when those requirements apply to new construction and alterations, and how to select and install fixtures to meet accessibility standards and the requirements of the LEED® v5 for Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
View the Zurn Elkay Water Solutions Course Library
This course is part of one or more "Course Collections". Click here to view the details.
We will discuss how Polyiso Continuous Insulation will improve the thermal performance of walls of Steel Stud Construction. In addressing the advantages of continuous insulation, we will also address the disadvantages of using steel studs without continuous insulation. We will discuss what Sustainability is related to and how it is measured, including factors that are involved in addressing Building Longevity, and how these concepts impact making buildings more energy efficient. We will look at various types of products used to achieve code-compliant designs with a perspective that addresses sustainable construction. Looking towards the future we will discuss the actions being undertaken in conjunction with energy conservation and construction codes, building science organizations, and other groups in pushing proper building envelope design. We will also look at the history of Polyiso and how this product is produced from raw chemicals, creating a completed board stock product....
View the Rmax - A Division of the Sika Corporation Course Library
The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems....
There are a multitude of building envelope products used and a variety of methods taken for achieving energy and building code requirements. Understanding the different roles a product plays in the envelope simplifies its design. In this course, we take a look at the code requirements for buildings classified as IBC Types I–IV, paths to achieving compliance, and the number of roles polyisocyanurate insulation plays in meeting these requirements....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
This course will provide attendees with valuable information and context endeavoring to help improve a practical understanding of the International Wildland-Urban Interface Code (IWUIC) and its implications on the uses of certain combustible building materials in the building envelope. The course will discuss how the International Wildland-Urban Interface Code (IWUIC) is designed and structured to supplement other I-Codes (e.g., the International Building Code (IBC) and International Residential Code (IRC)) as opposed to exist as a stand-alone code. Course content will include helpful background and theory behind the wildfire hazards the IWUIC is intended to mitigate. Most importantly, the course will provide attendees with understanding and examples of how combustible building materials and assemblies are suitable, viable options for use in construction under the IWUIC and capable of complying with the applicable requirements....
View the North American Modern Building Alliance Course Library
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope....
It is imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
Stairs are an important component in buildings, facilitating traffic flow and serving as a means of egress in emergencies. They can also pose a safety risk if not designed and outfitted properly. In this course, we address the safety aspects of stair design and specification, providing an overview of anti-slip products for new and existing stairways. Also discussed are the various codes and standards related to stair design and photoluminescent egress path markings and the available solutions to ensure code compliance and the subsequent well-being of users. Finally, we look at installation and anchorage options....
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes....
View the Owens Corning Course Library
This course is part of one or more "Course Collections". Click here to view the details.
The federal government, more and more states and local jurisdictions are enacting regulations and building codes mandating the installation of solar PV or solar-ready design on new building construction. This will result in an accelerated growth of rooftop solar with an intent to reduce costs and maximize the energy output of solar installations. The key to complying with solar mandates is mastering solar and building integration. This means considering the roof and solar as a single system, as well as non-traditional design elements focused on the anticipation of rooftop solar installations. All structural analysis must include all the system elements and full load path, including solar mounting systems and roof structures. And finally, a look at case studies, storms and testing....
This course reviews the importance of weather-resistive barriers (WRBs): why they are critical and the technology considerations specifiers should use when evaluating WRB’s performance. It will also outline several of the most important building code and industry requirements related to air barriers and what they mean....
The planet is currently in a water scarcity crisis, which is significantly affected by toilet water usage. This course examines the current plumbing codes, standards, and regulations that address toilet water usage, the need for and benefits of going beyond current standards, and the goals of a variety of beyond-the-code voluntary standards and rating systems, such as LEED v4 BD+C and ICC 700 National Green Building Standard®. It explains the various types of low-flow and ultra-low-flow toilets, their pros and cons, and their selection criteria. It concludes with a sampling of successful cost- and water-saving installations....
View the Niagara Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
A rainscreen is a type of assembly applied to an exterior wall consisting of an outer layer, inner layer, and a ventilated cavity between the two. These systems have been used extensively in other markets but are relatively new to the US. As codes evolve, and building science advances, rainscreens are becoming a popular way of enclosing buildings. They greatly increase performance while simultaneously enabling designers to achieve new and striking designs....
Provides an overview of the Industry Standards, as well as Code References, for the flashing materials used for the installation of Windows & Doors. The Code referenced material standards for window & door flashings are summarized and compared, as well as the Installation Standard practices that have been developed by the three main Fenestration Industry organizations. The Window & Door installation standards and principles presented, are also demonstrated through hands-on application using standard flashing materials with a focus on Commercial and Multi-Family Buildings....
View the DuPont Performance Building Solutions Course Library
Understanding the performance of building materials in real-world conditions is key to a successful building design. Recent studies have shown that the commonly reported R-values of polyisocyanurate foams at room temperature may overstate their real-world performance in cooler temperatures. This decline in R-value is driven by complex phase change mechanisms, which modify the foam's insulation performance. Insulations not performing to the expected levels may result in gaps in designed building enclosure assembly performance and quality. In this course, through a theoretical framework and empirical data, it is shown that optimized polyisocyanurate foam insulation results in better insulation performance leading to improved energy savings and reduced potential for condensation. Participants are encouraged to explore innovative insulation materials, understand differences between them, and match optimal materials to specific applications, while meeting modern construction codes and regulations. By matching the right insulation materials to the application, architects can contribute to energy-efficient and cost-conscious construction practices, and help buildings reduce their impact on the environment...
View the DuPont Performance Building Solutions Course Library
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements....
View the Rmax - A Division of the Sika Corporation Course Library
This course covers two widely used acoustic metrics, the STC and IIC ratings. Although these ratings are required by building codes and frequently used, they are still often poorly understood and there are many myths and misconceptions around their use. This course looks “under the hood” of the STC and IIC ratings to get a better understanding of what they are, how they work, and what they do and don’t tell us. Importantly, this course covers shortcomings of the STC and IIC ratings that if not understood can lead to poor designs for noise control. In that vein, this course also looks at two new acoustic ratings, HIIC and LIIC, that provide a better insight into the impact-noise reduction provided by floor/ceiling assemblies. Finally, the course uses the knowledge gained about ratings to discuss general methods of improving the acoustic performance of floor/ceiling assemblies....
With the global rise in natural disasters and the increasing need for sustainable environments, resiliency has become a necessity in the design and building industries. This course provides an overview of resilient design, how it relates to building codes and standards, and the role it plays in ensuring the safety and sustainability of the built environment. It examines the role masonry construction plays in meeting resilient design goals and the inherent properties of masonry that make it resilient and provides examples and case studies of resilient design strategies....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Displaying 116 - 140 of 343 results.
FIRST PREV [66-90] [91-115] [116-140] [141-165] [166-190] NEXT LAST