This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
This program is designed to provide the design community with an understanding of how energy efficiency impacts water management in wall systems and how to address the control layers of the envelope. The presentation will cover building science, code for bulk water, air, thermal, and vapor, and practical solutions for WRBs, drainage, and flashing....
View the DuPont Performance Building Solutions Course Library
Residential building envelope assemblies need to deliver a wide range of benefits – from reducing energy waste to maintaining occupant comfort to providing critical shelter during severe weather events. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used as part of residential envelope assemblies. This includes serving as the insulation layer in steep slope roofs, above grade walls, and below grade foundation assemblies. Topics include designing building and energy code-compliant residential envelope assemblies, solving performance challenges like reducing thermal-bridging and managing the threat of moisture intrusion, as well as reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
With the coming of the 2009 and 2012 International Energy Conservation Codes (IECC), insulating sheathing has played a growing role in the drive to make homes more energy efficient and comfortable for their occupants. The pressure is on for builders, home designers, and architects to find cost-effective construction methods and materials to meet these ever-growing performance standards. Educating one’s self and remaining current on building science trends, technologies and materials has proven to be a powerful measure of success in today’s residential construction markets. The following presentation “Why Use Insulating Sheathing”, aims to educate attendees on the flexibility of using foam sheathing in various Type V construction assemblies in order to meet stricter energy code minimums. Additional learning takeaways from this presentation include investigating common faults in Type V wood-framed walls from a framing, moisture, thermal bridging, and air sealing perspective; and how insulating sheathing can help correct these faults. Attendees will walk away with a thorough understanding of the advantages of using insulating sheathing in residential walls and be able to effectively communicate these advantages to their customers. Additionally, attendees will also leave with a solid understanding of the basic science behind any insulating material and how to better utilize these materials in various environments....
View the DuPont Performance Building Solutions Course Library
When daylighting a space, there are endless ways to go about it. With the power of daylight simulation, you can make informed decisions about material selections, placement and opening sizes, as well as building geometries. Modeling allows you to compare multiple designs to see how they will perform, while verifying light levels, potential glare and code compliance. Learn how we can help....
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method....
View the North American Modern Building Alliance Course Library
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course provides a comprehensive introduction to the design and specification of transaction systems that ensure safe, secure, and convenient interactions with customers. Participants will learn how to evaluate and select solutions for a variety of applications—from drive-thru and ticket windows to transaction drawers, package receivers, and ballistic-rated products. The course also examines the codes, regulations, and industry standards that influence design decisions, equipping attendees with the knowledge to design buildings with compliant, effective, and user-friendly transaction systems....
This presentation explores exterior wall design performance; energy code requirements; influences of air, moisture, thermal, and vapor barriers; and actual project case studies are presented. This program will be an interactive session that encourages feedback and questions....
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
Knowing your building’s ideal water pressure and how to achieve that pressure is essential to your overall plumbing effectiveness and safety, patrons’ health and safety, and your water conservation efforts. Determining ideal water pressure is not straightforward and many factors should be considered including building use, physical characteristics, codes, and plumbing components. Many of today’s innovative plumbing products can contribute to water conservation and cost savings but it’s also essential that specific water pressure levels are provided for optimal operation....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Learn how Spray Polyurethane Foam (SPF) insulation can be safely used in California residential construction to optimize cost efficiency while complying with Title 24 energy code and improving comfort, durability, and strength of homes and buildings....
How to Achieve Superior Building Envelope Performance in Rainscreen Wall Design explores rainscreen wall design theory, how rainscreen walls control hygrothermal loads, and shortcomings of today’s multi-component backup wall assemblies used in rainscreen wall construction. The course will compare and contrast the common multi-component backup wall assembly with the single-component insulated metal composite backup wall system, and demonstrate how the latter overcomes deficiencies of the former in creating a building envelope with superior performance as well as other key benefits....
This course defines and explains building science behind the code for the four control layers of the building envelope: water, air, thermal, and vapor. Participants will then explore typical design principles as well as alternative system assembly approaches to exterior wall design. In addition, presentation covers common attachment strategies for various types of claddings, including masonry, rain screen veneers, and applied/adhered veneers....
View the DuPont Performance Building Solutions Course Library
This course provides an overview of cable assemblies used as infill on residential and commercial railings. The course will explain the uses and advantages of building with stainless steel cable railing assemblies; identify and evaluate important railing frame design requirements, considerations, and options; discuss safety and code related issues, classify and describe the cable assembly components; outline the installation process of prefabricated cable kits and custom cable assemblies; and provide valuable insight for determining the best choice of cable and fittings for a successful cable railing installation....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
Course will cover where FRT wood is specified in the codes, definition of FRT wood, and the use of coatings as an equivalent solution to FRT wood in various construction types....
Displaying 124 - 148 of 351 results.
FIRST PREV [74-98] [99-123] [124-148] [149-173] [174-198] NEXT LAST