Concrete structures often face some of the most challenging environments, where chemical reactions can rapidly cause erosion and reduced service life. This course explores how acid attack, microbially induced corrosion (MIC), and carbonation compromise the structural integrity of concrete. It covers the origins and damaging effects of these processes, such as cracking, spalling, and corrosion. Learners will discover waterproofing strategies that prevent deterioration through performance-based admixtures that combine antimicrobial and crystalline technologies, along with a visual detection system for on-site verification. Designers will be better equipped to specify protective measures that extend the service life of concrete structures, reduce long-term maintenance, and lower the project’s carbon footprint....
The purpose of this program is to educate Architects on the differences between metal roofing products and how they compare to other steep slope roofing options. Upon Completion of this presentation architects will be able to Recognize the most common roof materials used in steep slope roofing and understand various types of metal roofing substrates. Identify different metal roofing configurations, coatings, and fastening applications. Analyze the importance of roof system components and testing standards along with assessing the development of design plans for regional impacts affecting metal roofing systems....
An educational session exploring innovative floor coating systems, their applications, and how they contribute to sustainability and durability in modern architecture. Attendees will learn about advancements in materials, the importance of proper installation methods, and the role of floor coatings in enhancing the functionality of commercial and residential spaces....
At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region....
New technology and improvements in masonry veneer installation can help your team save time and money in the construction process while providing superior results. In this course, you'll learn how cutting-edge technology is helping masons move beyond traditional lath and scratch and be introduced to the principles behind enhanced masonry veneer installation systems (EMVIS). Learn how to create permanent, high-strength installations for residential, commercial, and industrial applications using EMVIS with fortified mortars and innovative waterproofing barrier membranes that protect against air and water penetration....
Concrete is a very versatile and fundamental building material; however, because it is porous and wicks water through its matrix, concrete has water-related design challenges. This program examines the sustainable benefits of integral concrete waterproofing and analyzes traditional waterproofing methods as compared to integral methods in terms of performance, durability, risk, cost, and construction timeline....
This course is designed to provide an understanding the importance of continuous insulation relative to mass wall of Concrete and CMU, and how the continuous insulation can help leverage the mass wall properties to stabilize the building environment. In addition, we will address how specific types of continuous insulation can function as the Air and Water Resistive Barrier System, leading to better indoor environment....
View the Rmax - A Division of the Sika Corporation Course Library
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems....
High rise fires are not new to us. In fact, we have seen an increase in fire incidents in Asia, Europe, and the Middle East in the last 5-10 years that have amplified awareness on fire safety performance of taller structures. High rise buildings present a greater risk with an increased number of occupants that have a limited means of escape in the event of a fire. That is why the time element for containing a fire is so critical. Also, as we have seen in actual fires, vertical fire spread at the exterior façade can rapidly overwhelm fire fighters means of interceding the fire from ground level. As the fire accelerates and upward spread progresses, it often reaches a height beyond the reach of fire services water streams. That is why containing a fire and preventing if from spreading vertically is so critical for both occupant and first responder safety....
Noise negatively impacts human health, making sound control crucial in multifamily housing and various commercial applications. This course reviews airborne and impact sound, the key elements of soundproofing, and the role of high-performance wood fiber soundproofing products in providing effective noise control. Additionally, it discusses how these solutions contribute to meeting requirements of the LEED® v5 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C) rating systems and the WELL Building Standard version 2....
Composite roofing materials have been available for over a decade, providing a cost-effective alternative to traditional slate and shake roofing systems. In this course, design professionals can thoroughly explore the sustainable and versatile characteristics of composite roofing solutions. Also discussed are the benefits of composite roofing systems, such as their long life cycle, durability, and adaptability for various applications and environments....
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency....
This course introduces expanded polystyrene (EPS) underslab insulation and examines its role in energy performance, moisture management, thermal control, vapor management, radon mitigation, and hydronic heating in residential and commercial buildings. The course supports project teams working toward LEED® v5 Building Design and Construction (BD+C) or Interior Design and Construction (ID+C) requirements by outlining how underslab insulation decisions influence compliance with thermal envelope provisions, energy modeling pathways, and material considerations within the rating systems....
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. The impact on students’ academic achievement, social adaptation and mental health can be vast and long lasting. In this class we will examine impact of different sound problems and how introduce solutions to mitigate them. Learn about solutions that create synergy between the architecture and the classroom environment to optimize student learning, student recruitment, and teacher retention....
When designing the building enclosure from the substrate to the cladding, architects and designers face a host of challenges, from energy code and NFPA 285 fire testing compliance, to ensuring aesthetically pleasing façade design. This course, featuring a panel of four different industry experts, explains design trade-off complexities and strategies to maximize flexibility while maintaining code compliance—and ultimately build a dependable, robust building façade. First, experts will review the challenges of choosing and placing an air and weather barrier. Secondly, codes and thermal bridging will be analyzed to determine insulation and thermal spacer selection. Finally, we will explore critical challenges associated with continuous insulation and the requirements of a rainscreen cladding system....
This is a Product SpotLight Presentation. SOPRANATURE TOUNDRA BOX combines all the necessary components of a green roofing system into a modular tray. Each tray includes built in drainage slots, filter fabric, growing medium and pre-grown plants protected by a removable retention frame. Suitable for both small and large surfaces, these lightweight, easy-to-carry trays are easily assembled in minutes to create an instant green roof....
Architectural insulated metal panels (IMPs) are an increasingly popular choice for building developers and architects, presenting a compelling solution that combines functionality, efficiency, and aesthetic appeal. This course reviews the architectural IMP, its applications and benefits, and comparisons to other materials. It explores current trends and developments that are paving the way for increased aesthetic possibilities and building envelope performance....
This live course is offered as part of the DuPont Building Science Master Summit May 25, 2023 starting at 11am ET. Presented by: Keith P. Nelson, NCARB, AIA, CDT, BCxP, and Gabriel Acevedo, DuPont The trend toward sustainable building design took on new dimensions during the pandemic and concurrent supply chain crisis. Coupled with the ongoing dilution of skilled labor in the construction trades, there emerged an increased urgency and opportunity in specifying and installing sustainable roofing systems....
Moisture related flooring failures cost the flooring industry and associated stakeholders billions of dollars annually. Understanding the issues provides a path for solutions related to floor covering choices, mitigation products, and industry standards. This course identifies the issues, outcomes, industry standards, and best solutions available for design professionals....
Rough openings are holes in the building enclosure, fitted with fenestrations that leak or will leak. It is critical to properly direct those leaks out of the enclosure. Designs for rough opening specify; tapes, sealants or flashing materials that are water, air, water vapor tight or vapor open. When detailed and installed correctly, most of these materials prevent water from entering into the interstitial wall cavities, allow the “leaks” to drain out of the building enclosure. Tapes, sealants and flashing components can fail over time or are improperly installed allowing water intrusion, trapping the water is vapor impermeable. By utilizing vapor open systems for rough opening materials, water that once trapped by impermeable flashing systems can escape via vapor diffusive drying. This presentation will describe failures, correct installation and testing of rough opening flashing and address current research on vapor open rough opening systems and how permeability enhances rough opening assembly performance....
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
The use of sustainable materials and products during building design will become the standard within the construction industry, and environmental product declarations (EPDs) and Health Product Declarations (HPDs) help architects and owners make informed decisions for their projects. Insulated metal panels— a prime example of a sustainable product—are one of the most cost-effective solutions to reduce energy and greenhouse gases....
As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Displaying 126 - 150 of 526 results.
FIRST PREV [76-100] [101-125] [126-150] [151-175] [176-200] NEXT LAST