As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
Provides an overview of the Industry Standards, as well as Code References, for the flashing materials used for the installation of Windows & Doors. The Code referenced material standards for window & door flashings are summarized and compared, as well as the Installation Standard practices that have been developed by the three main Fenestration Industry organizations. The Window & Door installation standards and principles presented, are also demonstrated through hands-on application using standard flashing materials with a focus on Commercial and Multi-Family Buildings....
View the DuPont Performance Building Solutions Course Library
For some applications, building codes provide for the use of fire-retardant-treated (FR) wood products as an alternative to noncombustible materials. To ensure that FR wood products are properly specified, it is important to understand how these products are made, their formulations, and the building code references that guide their use in construction. This course offers a review of FR wood products, including their manufacture, the applications and types of fire retardants that are available, and the factors that must be considered to ensure FR wood products are properly specified for code compliance....
View the Western Wood Preservers Institute Course Library
Western Wood Preservers Institute
This course is part of one or more "Course Collections". Click here to view the details.
Understanding the performance of building materials in real-world conditions is key to a successful building design. Recent studies have shown that the commonly reported R-values of polyisocyanurate foams at room temperature may overstate their real-world performance in cooler temperatures, potentially resulting in gaps in designed building enclosure assembly performance and quality. Through a theoretical framework and empirical data, this course shows that optimized polyisocyanurate foam insulation results in better performance, leading to improved energy savings and reduced potential for condensation. Participants are encouraged to explore innovative insulation materials, understand differences between them, and match optimal materials to specific applications while meeting modern construction codes and regulations. By matching the right insulation materials to the application, architects can contribute to energy-efficient and cost-conscious construction practices and help buildings reduce their impact on the environment....
View the DuPont Performance Building Solutions Course Library
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of materials classified by the IBC requiring NFPA 285 testing is increasing. Combined with more stringent energy code requirements, the use of combustible materials is also growing in exterior walls. The most common contributing factors to non-compliance of designs requiring NFPA 285 assembly testing include: −Lack of understanding of applicability of test on exterior wall assemblies. −Recent building and energy code changes causing new triggers for the test. −Lack of understanding of assembly vs. product results for NFPA 285 tests. This seminar will discuss the impact of the NFPA 285 Test on buildings using IBC-2018, the parameters and history of NFPA 285, which building envelope components are combustible and require NFPA 285 testing per IBC, and the paths to NFPA 285 code compliance that a designer can take. These elements all combine to integrate NFPA 285 compliant assemblies into building envelope systems....
View the DuPont Performance Building Solutions Course Library
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope....
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
The increase in building energy efficiency requirements has led to the use of exterior continuous insulation (CI) to improve the performance of the building envelope. This presentation reviews the benefits of polyiso continuous insulation and then examines in detail the NFPA 285 test standard and fire safety requirements of the 2021 International Building Code for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I–IV)....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
Modern building envelope assemblies need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used for above grade wall assemblies as well as below grade applications. Topics covered include designing building and energy code-compliant commercial envelope assemblies, solving performance challenges like thermal bridging and moisture barrier and air barrier requirements, and reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
The federal government, more and more states and local jurisdictions are enacting regulations and building codes mandating the installation of solar PV or solar-ready design on new building construction. This will result in an accelerated growth of rooftop solar with an intent to reduce costs and maximize the energy output of solar installations. The key to complying with solar mandates is mastering solar and building integration. This means considering the roof and solar as a single system, as well as non-traditional design elements focused on the anticipation of rooftop solar installations. All structural analysis must include all the system elements and full load path, including solar mounting systems and roof structures. And finally, a look at case studies, storms and testing....
Metal roofing offers longevity, durability, and visual appeal. Today, a range of color and finish options are available that afford specifiers broad design flexibility. This course explores key solar reflectance and sustainability considerations when evaluating metal roofing colors and how selection relates to requirements in codes and green building programs such as LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2. Case studies demonstrate how metal roofing colors have been used to meet design and sustainability objectives....
The Builders Hardware Manufacturers Association (BHMA®) is the only organization accredited by the American National Standards Institute (ANSI) to develop and maintain builders hardware standards with cycling, operational, strength, security, and finish test requirements. This course explores the performance standards and the certification program related to commercial architectural hardware....
View the Builders Hardware Manufacturers Association Course Library
Builders Hardware Manufacturers Association
This course is part of one or more "Course Collections". Click here to view the details.
The purpose of this session will focus on what an engineered façade system should provide. Project teams are seeking a complete single-source system from the studs to exterior finish. We will discuss types of testing and approvals Façade systems offer to meet national and international building codes such as FM, NFPA, and others. Further discussion will be on performance warranties for leakage, system integrity, material performance similar to a roofing warranty. From the designer’s role, where you place the insulation and how do you attach the cladding can be the most critical decision when working with a building façade. We will explore both questions from a building science perspective to give clarity and certainty this is done properly....
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance....
What are you doing to address the urban heat island effect? This hot topic in the design industry has led to local governments following LEED and amending their building codes to combat the effect of traditional roofing materials. In this session, you'll discover materials and techniques that will help you bring sustainable roofing into your practice - meeting both the latest building codes and the demands of increasingly eco-conscious clients. Discover how "cool roofing" and "green roofing" can help elevate sustainability while also maintaining performance and controlling costs....
This course provides an introduction to code compliance requirements for low-slope roofing systems as it relates to Wind Uplift, Impact Resistance, and Fire Resistance. Participants will explore the relevant provisions of the 2021 International Building Code (IBC), with emphasis on the referenced standards outlined in Chapters 15 and 16. Participants will review real-world documentation used to demonstrate compliance, enhancing their ability to specify and design roofing systems that meet regulatory standards....
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information....
View the Legrand Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Fire safety and suppression are essential design features for building projects. This course explores how innovative water mist fire suppression systems can enhance occupant safety in homes while preserving aesthetics and minimizing water damage. Key design principles of electronically controlled water mist systems are examined, and their installation and maintenance are described. Also discussed is guidance for dealing with code officials when using these systems as an alternative to traditional fire sprinklers....
