Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
The 2024 International Energy Conservation Code (IECC) fundamentally shifts how the thermal performance of building enclosures is designed and evaluated. In the 2024 IECC Chapter 4 Commercial Energy Efficiency, compliance now requires design teams to account for linear and point thermal bridging, as does ASHRAE 90.1-2022, which is incorporated by reference. This impact will notably change how design professionals consider typical building details like parapets, cladding attachments through continuous insulation, window perimeters, and more. Through a side-by-side review of previous and current requirements, this course will bolster design professionals’ understanding of the steps needed to address thermal bridges and how to incorporate these results in prescriptive path, performance path, and COMcheck compliance calculations. By examining the updated air leakage testing requirements codified in the 2024 IECC, professionals will learn to decipher whether whole-building air leakage is mandatory or if the air barrier design and verification approach will apply to their project. This course will explore the practical impacts of the new energy code requirements, reveal strategies for meeting compliance, and share tools that can help design professionals stay ahead in a rapidly changing energy code landscape. This course welcomes both new and experienced design professionals alike. Those with a basic understanding of building enclosure-related heat transfer and fundamental calculation methods will benefit most from this course....
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of materials classified by the IBC requiring NFPA 285 testing is increasing. Combined with more stringent energy code requirements, the use of combustible materials is also growing in exterior walls. The most common contributing factors to non-compliance of designs requiring NFPA 285 assembly testing include: −Lack of understanding of applicability of test on exterior wall assemblies. −Recent building and energy code changes causing new triggers for the test. −Lack of understanding of assembly vs. product results for NFPA 285 tests. This seminar will discuss the impact of the NFPA 285 Test on buildings using IBC-2018, the parameters and history of NFPA 285, which building envelope components are combustible and require NFPA 285 testing per IBC, and the paths to NFPA 285 code compliance that a designer can take. These elements all combine to integrate NFPA 285 compliant assemblies into building envelope systems....
View the DuPont Performance Building Solutions Course Library
Gain an overall understanding of how wind and wind codes affect overhead doors and how these codes help to ensure the health, safety, & welfare of building occupants....
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes....
View the Owens Corning Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Mass timber, a type of building material and structural framing style, was recently adopted by the 2021 International Building Code, and as such is a rapidly growing building trend in the United States. When it comes to building systems in mass timber structures, product decisions must be thoroughly thought out early in design, allowing for efficient design modeling and a speedy construction phase. This course provides designers an overview of the updated IBC as it relates to mass timber building, as well as the many applications and challenges designers face when it comes to providing code-compliant and aesthetically pleasing power, data/communication, and AV throughout the building space....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations....
Rooftop HVAC equipment, waste receptacles, and other necessary but unsightly equipment are common in today’s commercial industries. Rooftop and ground screening can provide a solution for meeting code requirements while improving building aesthetics. In addition, screens may improve a property’s safety and security and establish privacy boundaries. This course offers an in-depth discussion of rooftop and ground screening, the various ways to screen, and considerations when selecting a screen. Different installation techniques and comparative characteristics of traditional screening methods versus unit-attached and modular screening methods are also discussed....
View the CityScapes Architectural Innovations Course Library
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems....
The trend toward greater resilience in roof design has come into sharp focus in recent years. The forces driving this trend include the decline in skilled labor among roofing contractors and allied trades; changes in the building code that have been influenced by severe weather patterns; and the increasing application of sustainable and “green" technologies. The urgency of this trend has challenged both design and construction professionals to find both human and technological solutions in a dynamic work environment. This presentation will explore how the trend toward greater roof resilience has affected the application and performance of roofing systems over time. It will also discuss ways to meet the changing demands....
Learn about how Wood Look Aluminum is a strong and durable yet environmentally friendly choice as an alternative to wood building materials. Find out how Wood Look Aluminum is made and how every step of the process is approached with methods that are eco-friendly with a low carbon footprint. Understand the codes and standards that are met to provide this reliable, long lasting, building material that is green enough to qualify for LEED points....
One hour seminar detailing the use of Expansion Joint Covers. Designed to broaden knowledge of joint movement and proper joint sizing to ensure there is no structural damage or life safety issue. Contains an overview of both interior and exterior Expansion Joint Covers and which are most appropriate for certain conditions. Fire barriers are discussed and what's important to know regarding current testing requirements and how to specify them to meet current building codes....
Roofing is one of the most common renovation projects on commercial buildings. Upgrading a roof assembly to meet current building standards provides an opportunity to save energy and maintain the necessary fire and structural performance. This course reviews the code requirements for commercial reroofing and discusses how reroofing can improve a building’s energy efficiency....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes....
This course provides an introduction to code compliance requirements for low-slope roofing systems as it relates to Wind Uplift, Impact Resistance, and Fire Resistance. Participants will explore the relevant provisions of the 2021 International Building Code (IBC), with emphasis on the referenced standards outlined in Chapters 15 and 16. Participants will review real-world documentation used to demonstrate compliance, enhancing their ability to specify and design roofing systems that meet regulatory standards....
This presentation focuses on Florida's wind design requirements for commercial low-slope roofing. The presentation covers new building code requirements, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
This program is designed to provide the design community with an understanding of how energy efficiency impacts water management in wall systems and how to address the control layers of the envelope. The presentation will cover building science, code for bulk water, air, thermal, and vapor, and practical solutions for WRBs, drainage, and flashing....
View the DuPont Performance Building Solutions Course Library
This course defines and explains building science behind the code for the four control layers of the building envelope: water, air, thermal, and vapor. Participants will then explore typical design principles as well as alternative system assembly approaches to exterior wall design. In addition, presentation covers common attachment strategies for various types of claddings, including masonry, rain screen veneers, and applied/adhered veneers....
View the DuPont Performance Building Solutions Course Library
This course explores design choices to meet energy code and thermal insulation selection strategies to maximize long term building performance. Factors influencing the performance of an insulation in its application include production, R-values, moisture, temperature, aging, and quality of installation will be discussed....
View the DuPont Performance Building Solutions Course Library
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
This course will provide an overview of resilient design and discuss how resilient design is not covered by typical building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. There will be examples given in the presentation of resilient design strategies....
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
Provides an overview of the Industry Standards, as well as Code References, for the flashing materials used for the installation of Windows & Doors. The Code referenced material standards for window & door flashings are summarized and compared, as well as the Installation Standard practices that have been developed by the three main Fenestration Industry organizations. The Window & Door installation standards and principles presented, are also demonstrated through hands-on application using standard flashing materials with a focus on Commercial and Multi-Family Buildings....
View the DuPont Performance Building Solutions Course Library
This course provides an overview of cable assemblies used as infill on residential and commercial railings. The course will explain the uses and advantages of building with stainless steel cable railing assemblies; identify and evaluate important railing frame design requirements, considerations, and options; discuss safety and code related issues, classify and describe the cable assembly components; outline the installation process of prefabricated cable kits and custom cable assemblies; and provide valuable insight for determining the best choice of cable and fittings for a successful cable railing installation....
Displaying 150 - 174 of 352 results.
FIRST PREV [100-124] [125-149] [150-174] [175-199] [200-224] NEXT LAST