An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain ...
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of mater...
View the DuPont Performance Building Solutions Course Library
This program is designed to provide the design community with an understanding of how energy efficiency impacts water management in wall systems and how to address the control layers of the envelope. The presentation will cover building science, code for bulk water, air, thermal, and vapor, and practical solutions for WRBs, drainage, and flashing....
View the DuPont Performance Building Solutions Course Library
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design gu...
Newer energy codes require that homes be sealed and tested to 3-5 air changes per hour. Good home design and the right spec’s go along way to making that happen. Proper air sealing saves energy and reduces moisture and mold problems. In this advanced session 1 hour session building science expert Steve Easley uses pictures from the real world exa...
View the DuPont Performance Building Solutions Course Library
This course defines and explains building science behind the code for the four control layers of the building envelope: water, thermal, air and vapor. There will be a detailed overview of air leakage, why it matters in a sustainable envelope and why air barrier continuity is critical to building performance. Participants will be asked to explore ty...
View the DuPont Performance Building Solutions Course Library
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and Internation...
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Railing systems perform various functions, meeting safety requirements and serving as a key component of a building’s aesthetic. This course includes a discussion of the strengths and weaknesses of aluminum and structural vinyl railing systems, how they are made, and how they are used in the building industry, including a detailed summary of how ...
View the rdi Railing Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multi-story residential, commercial, and multi-purpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, wit...
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, app...
This course covers how to comply with the most stringent Energy Code requirements using pre-fabricated wall panels and components featuring next generation concrete masonry unit designs....
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-eng...
The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corp...
View the Construction Specialties Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed....
This course explores the below-grade use of polyisocyanurate (POLYISO) insulation to meet energy code and maximize thermal performance of the building foundation. Let us help dispel the myths that have been created relative to POLYISO insulation while discussing its thermal performance, water absorption, and load capacity – the three primary char...
View the Rmax - A Division of the Sika Corporation Course Library
The trend toward building with mass timber across the US and beyond is accelerating, requiring design professionals to understand the why, when, and how of designing a mass timber structure. The industry is dynamic and evolving along with the building codes that dictate mass timber system requirements and limits. This course identifies the conside...
This presentation will cover what civil engineers need to know when utilizing segmental retaining walls for grade separation in their site development plans. The presentation will introduce participants to the National Concrete Masonry Association’s Best Practices Guide for Segmental Retaining Walls focusing on recommendations relevant to Civil E...
All the new energy codes are requiring or moving towards exterior insulation for exterior walls to increase energy efficiency and reduce the energy losses due to thermal bridging. This class examines how to design and build high performance wall assemblies that deliver significant increases in energy efficiency and do not lead to trapping water and...
View the DuPont Performance Building Solutions Course Library
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create ...
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Conventional building practice consists of single functional materials combined to serve the building design needs. For example, an air barrier is a distinct and separate layer, and water resistive barrier is often a separate layer. New designs concepts where multiple functionality, such as air and water barriers, can be met at the same layer per b...
View the DuPont Performance Building Solutions Course Library
This course is aimed to define what exactly continuous insulation is, and the key benefits of using it. The course will also show participants how continuous insulation complies with building and energy code requirements within that field....
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the...
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between the...
Metal roofing offers longevity, durability, and visual appeal. Today, a range of color and finish options are available that afford specifiers broad design flexibility. This course explores key solar reflectance and sustainability considerations when evaluating metal roofing colors and how selection relates to requirements in codes and green buildi...
This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in s...
Displaying 151 - 175 of 225 results.
FIRST PREV [101-125] [126-150] [151-175] [176-200] [201-225] NEXT LAST