The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance....
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection....
View the DuPont Performance Building Solutions Course Library
Modular metal panels (MMPs) integrate advanced technology with modern aesthetics, providing high-performance building envelopes that enhance design and durability. This course explores the evolution of MMPs and what distinguishes them from other building products. You will examine the key components that make up the system and its fundamental principles and best practices. Finally, the course demonstrates how these elements combine in real-world applications, showcasing various design options....
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multi-story residential, commercial, and multi-purpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment....
Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considerations and embodied carbon; and key considerations for choosing the right trim. Finally, the course applies these concepts to several design scenarios and identifies the appropriate trim option for each....
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
This course explores design choices to meet energy code and thermal insulation selection strategies to maximize long term building performance. Factors influencing the performance of an insulation in its application include production, R-values, moisture, temperature, aging, and quality of installation will be discussed....
View the DuPont Performance Building Solutions Course Library
This course reviews the importance of weather-resistive barriers (WRBs): why they are critical and the technology considerations specifiers should use when evaluating WRB’s performance. It will also outline several of the most important building code and industry requirements related to air barriers and what they mean....
Architectural railing systems offer safety, durability, strength, and design flexibility for a variety of indoor and outdoor applications. This course provides an overview of the important factors that need to be considered when selecting and specifying a railing system for a commercial or residential building project. Topics include materials and finishes, fabrication and installation, and relevant building codes and standards....
View the Lavi Industries Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Building fires claim nearly 4,000 lives each year in the U.S. It is the responsibility of building designers to do their utmost to prevent such fires and their accompanying loss of life. Often, the difference between life and death is as simple as a fire door that functions properly. This course focuses on describing how design professionals can reinforce their ability to ensure that fire doors are specified, installed, inspected, and maintained properly and that they meet or exceed all relevant code requirements....
This course is part of one or more "Course Collections". Click here to view the details.
This course offers detailed information about modern redwood timberland management approaches that contribute to the species’ long-term sustainability as a building material. The course also provides insight into how third-party certification helps the redwood industry communicate environmental stewardship. The course details how wood is created through the process of photosynthesis and how carbon is sequestered long-term in wood products, drawing a connection between sustainably sourced redwood lumber products and the ability to achieve carbon-neutral standards. Lastly, the course defines redwood grades and performance characteristics and describes how these properties achieve building code acceptance....
All the new energy codes are requiring or moving towards exterior insulation for exterior walls to increase energy efficiency and reduce the energy losses due to thermal bridging. This class examines how to design and build high performance wall assemblies that deliver significant increases in energy efficiency and do not lead to trapping water and moisture related failures. The class will also show practical approaches to advanced framing as well as specific installation protocols to prevent insulation installation related degradation which is 30% for typical installations. Steve Easley will use pictures from real world installations to illustrate the do’s and don’ts to building high performance wall assemblies that are affordable and cost effective. This interactive class is designed to sort through the myriad of insulation system options in order to match the best insulation system to the type of structure. This class also will show latest FMA/AAMA/WDMA 500-16 installation standards for integrating exterior insulation with weather barriers and window flashing. Additional content will provide information on water, air and vapor barrier code requirements in order to develop appropriate specifications to meet these new codes and create buildings that perform with better real-world results....
View the DuPont Performance Building Solutions Course Library
Reducing noise between occupied spaces isn’t just needed for occupant comfort and productivity, it is sometimes required by building code. This presentation is an overview of noise control principals, construction composites, and design methodology for ceilings, floors, and partitions. A special emphasis is placed on performance-oriented designs requiring third party consultants....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Learn about how Wood Look Aluminum is a strong and durable yet environmentally friendly choice as an alternative to wood building materials. Find out how Wood Look Aluminum is made and how every step of the process is approached with methods that are eco-friendly with a low carbon footprint. Understand the codes and standards that are met to provide this reliable, long lasting, building material that is green enough to qualify for LEED points....
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants....
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings....
View the Panasonic Industrial Devices, Building Materials Group Course Library
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency....
As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an exterior continuous insulation, and significantly reduce the risk of condensation and subsequent mold/corrosion damage in all climate zones....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Course will cover where FRT wood is specified in the codes, definition of FRT wood, and the use of coatings as an equivalent solution to FRT wood in various construction types....
This presentation focuses on Florida's wind design requirements for commercial low-slope roofing. The presentation covers new building code requirements, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course discusses the benefits of PL safety products and the codes and testing standards related to PL way-finding systems....
View the Ecoglo Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Conventional building practice consists of single functional materials combined to serve the building design needs. For example, an air barrier is a distinct and separate layer, and water resistive barrier is often a separate layer. New designs concepts where multiple functionality, such as air and water barriers, can be met at the same layer per building code will be discussed. In particular, if insulated foam sheathing is used, appropriate joint treatment can enable compliance as air, water, and thermal barriers. Both conventional solid (peel and stick), and new fluid applied flashing and barriers will be discussed. Participants will also gain an understanding of material options and impact of application techniques on long term building performance....
View the DuPont Performance Building Solutions Course Library
Displaying 155 - 179 of 342 results.
FIRST PREV [105-129] [130-154] [155-179] [180-204] [205-229] NEXT LAST