Conventional building practice consists of single functional materials combined to serve the building design needs. For example, an air barrier is a distinct and separate layer, and water resistive barrier is often a separate layer. New designs concepts where multiple functionality, such as air and water barriers, can be met at the same layer per building code will be discussed. In particular, if insulated foam sheathing is used, appropriate joint treatment can enable compliance as air, water, and thermal barriers. Both conventional solid (peel and stick), and new fluid applied flashing and barriers will be discussed. Participants will also gain an understanding of material options and impact of application techniques on long term building performance....
View the DuPont Performance Building Solutions Course Library
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques....
The purpose of this session will focus on what an engineered façade system should provide. Project teams are seeking a complete single-source system from the studs to exterior finish. We will discuss types of testing and approvals Façade systems offer to meet national and international building codes such as FM, NFPA, and others. Further discussion will be on performance warranties for leakage, system integrity, material performance similar to a roofing warranty. From the designer’s role, where you place the insulation and how do you attach the cladding can be the most critical decision when working with a building façade. We will explore both questions from a building science perspective to give clarity and certainty this is done properly....
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum thermal performance....
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants....
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
When designing the building enclosure from the substrate to the cladding, architects and designers face a host of challenges, from energy code and NFPA 285 fire testing compliance, to ensuring aesthetically pleasing façade design. This course, featuring a panel of four different industry experts, explains design trade-off complexities and strategies to maximize flexibility while maintaining code compliance—and ultimately build a dependable, robust building façade. First, experts will review the challenges of choosing and placing an air and weather barrier. Secondly, codes and thermal bridging will be analyzed to determine insulation and thermal spacer selection. Finally, we will explore critical challenges associated with continuous insulation and the requirements of a rainscreen cladding system....
Reducing noise between occupied spaces isn’t just needed for occupant comfort and productivity, it is sometimes required by building code. This presentation is an overview of noise control principals, construction composites, and design methodology for ceilings, floors, and partitions. A special emphasis is placed on performance-oriented designs requiring third party consultants....
The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems....
Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considerations and embodied carbon; and key considerations for choosing the right trim. Finally, the course applies these concepts to several design scenarios and identifies the appropriate trim option for each....
This course explores how understanding disability can guide the creation of accessible and inclusive spaces. It examines access opportunities in educational and public environments, with an emphasis on strategies that go beyond code compliance. These approaches can help meet credit requirements in the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2 by improving usability, promoting occupant well-being, and reducing long-term barriers through design solutions....
This course provides a general overview of air barriers- their role in building performance, the material options, and design considerations. Building code requirements and verification testing will be reviewed for an understanding of how to meet or exceed today’s performance requirements. General considerations will also be discussed to aid in selecting the best system and installation methods for specific projects....
Attic ventilation is an important component in proper structural design. By encouraging airflow, attic ventilation plays a key role in maintaining structural integrity, ensuring roof component durability, providing a healthy indoor environment, and minimizing energy consumption. Additionally, proper attic ventilation hinders or prevents mold growth, reduces interior pollutants, and acts as a pivotal fire prevention tool. This course looks at how attic ventilation systems work, the benefits they provide, and the associated building codes and regulations. ...
Discover the science of wind uplift; how it is changing. Learn how the changes are impacting codes and roof material choices. Learn about testing and specification techniques for metal roof options and accessories to improve wind uplift resistance providing a safer building at a lower cost....
Presented by a subject matter expert on behalf of CENTRIA, a Nucor company. As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
Modular metal panel (MMP) wall systems allow for an array of different exterior and interior building designs due to their wide range of panel sizes, planes, and layout configurations. This course covers the attributes of MMPs, including the available substrates, their fabrication and ease of installation, and their ability to deliver a simple, constructible concealed-fastener rainscreen system....
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
Security entrance control is essential to manage the flow of visitor and authorized user traffic through secured or restricted areas. A wide range of products with multiple types of technologies are available, and a host of buzz words describing their operation abound in this industry. Join us as we journey through the range of products, their operation, the level of security they provide, and both building code and ADA compliance. Security entrance control enhances the safety and peace-of-mind for of employees, residents, passengers, customers, visitors, etc. by providing automatic security screening of those who try to enter and exit the secured space. This secured space may be a campus, an entire building, or designated area within the building. Security entrance control occurs at office and residential buildings, healthcare facilities, entertainment complexes, transportation facilities, campuses, shopping locations, and anywhere that people enter and exit. The security entrance combined with credentialing equipment and software that limits use to only authorized personnel, make for a seamless passage into a secure area. Not only do security entrances control access and/or egress, they provide a visual presence that serves as a deterrent. SECURITY IS A MUST IN TODAY’S WORLD....
Dual-flush wall-mounted toilets help create modern, stylish bathrooms that strike a balance between sustainable water efficiency, flexible design, and space savings. This course compares this style with other traditional types of toilets, discusses how wall-mounted toilets benefit commercial and residential users, and explains how they satisfy the Americans with Disabilities Act (ADA) and other accessibility and building code requirements....
Insulated metal panels (IMPs) are lightweight composite exterior wall and roof panels with superior insulating properties. Commercial and industrial buildings benefit from their energy efficient insulation, lightweight construction, durability, and cost-effective, timely installation. This course discusses IMPs in terms of their design options, appropriate support structure, installation, function, code compliance, and warranties....
This course explores how understanding disability can guide the creation of accessible and inclusive spaces. It examines access opportunities in educational and public environments, with an emphasis on strategies that go beyond code compliance. These approaches can help meet credit requirements in the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ version 2 by improving usability, promoting occupant well-being, and reducing long-term barriers through design solutions....
Review the physics of building envelopes, including hygrothermal loads, control layers, climate zones and cladding functions. The importance of control layer continuity at wall, roof and slab connections is studied. We look at how IMPs perform the same functions as multi-component wall systems through the use of panels joints, sealants and an insulating core. Emphasis is placed on the concept of the Perfect/Universal Wall, and how utilizing the proper ordering of wall components can greatly simplify wall design in all climate zones. Energy codes are also touched on, including their impact on the use of Perfect/Universal Wall designs. This course reduces a relatively complex subject to a level that teaches practical concepts for the building designer....
Explore specialized materials, code compliance, and the unique environmental demands of mission-critical facilities to optimize energy efficiency and building resilience. Learn about the unique fire risks and environmental demands of data center operations. Evaluate how product solution choices affect energy efficiency, installation, maintenance, and risk management....
3M - Building Protection - Air Barrier, Fire Barrier, and Insulation Moisture Barrier/Jacketing
Displaying 163 - 187 of 340 results.
FIRST PREV [113-137] [138-162] [163-187] [188-212] [213-237] NEXT LAST