Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm....
This course discusses the code requirements for thermal and ignition barriers for spray polyurethane foam, the testing required, code requirements for vapor retarders depending on climate zone, and how these coatings are installed....
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Authorities having jurisdiction all over the world, including in all 50 US states, have mandated photoluminescent egress path markings to support safe evacuation of high-rise buildings in the case of total power failure. This course reviews photoluminescent egress path marking requirements in the model International Building Code® and International Fire Code® (2015, 2018, 2021) and identifies compliant photoluminescent path marking products. The course also discusses recommended best practices that exceed code requirements, which will reduce building operation costs and improve occupant and first responder safety....
View the Safe-T-Nose Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection....
View the DuPont Performance Building Solutions Course Library
The 2024 International Energy Conservation Code (IECC) fundamentally shifts how the thermal performance of building enclosures is designed and evaluated. In the 2024 IECC Chapter 4 Commercial Energy Efficiency, compliance now requires design teams to account for linear and point thermal bridging, as does ASHRAE 90.1-2022, which is incorporated by reference. This impact will notably change how design professionals consider typical building details like parapets, cladding attachments through continuous insulation, window perimeters, and more. Through a side-by-side review of previous and current requirements, this course will bolster design professionals’ understanding of the steps needed to address thermal bridges and how to incorporate these results in prescriptive path, performance path, and COMcheck compliance calculations. By examining the updated air leakage testing requirements codified in the 2024 IECC, professionals will learn to decipher whether whole-building air leakage is mandatory or if the air barrier design and verification approach will apply to their project. This course will explore the practical impacts of the new energy code requirements, reveal strategies for meeting compliance, and share tools that can help design professionals stay ahead in a rapidly changing energy code landscape. This course welcomes both new and experienced design professionals alike. Those with a basic understanding of building enclosure-related heat transfer and fundamental calculation methods will benefit most from this course....
With the coming of the 2009 and 2012 International Energy Conservation Codes (IECC), insulating sheathing has played a growing role in the drive to make homes more energy efficient and comfortable for their occupants. The pressure is on for builders, home designers, and architects to find cost-effective construction methods and materials to meet these ever-growing performance standards. Educating one’s self and remaining current on building science trends, technologies and materials has proven to be a powerful measure of success in today’s residential construction markets. The following presentation “Why Use Insulating Sheathing”, aims to educate attendees on the flexibility of using foam sheathing in various Type V construction assemblies in order to meet stricter energy code minimums. Additional learning takeaways from this presentation include investigating common faults in Type V wood-framed walls from a framing, moisture, thermal bridging, and air sealing perspective; and how insulating sheathing can help correct these faults. Attendees will walk away with a thorough understanding of the advantages of using insulating sheathing in residential walls and be able to effectively communicate these advantages to their customers. Additionally, attendees will also leave with a solid understanding of the basic science behind any insulating material and how to better utilize these materials in various environments....
View the DuPont Performance Building Solutions Course Library
It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Magnesium oxide (MgO) products are panelized construction products that can be used as a direct replacement for other panels, such as gypsum, plywood, and OSB. This course aims to provide insight into MgO products, equipping building professionals with the knowledge and tools to select and specify them correctly, which in turn impacts occupant safety. We will also explore their performance characteristics, features, and purported issues, as well as relevant building code provisions and the evaluation process required for product compliance. Finally, we’ll look at the types of testing data for building materials and the importance of using certified products to ensure occupants’ life safety....
View the NEXGEN Building Products Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Mass timber, a type of building material and structural framing style, was recently adopted by the 2021 International Building Code, and as such is a rapidly growing building trend in the United States. When it comes to building systems in mass timber structures, product decisions must be thoroughly thought out early in design, allowing for efficient design modeling and a speedy construction phase. This course provides designers an overview of the updated IBC as it relates to mass timber building, as well as the many applications and challenges designers face when it comes to providing code-compliant and aesthetically pleasing power, data/communication, and AV throughout the building space....
The presentation will the concept of Consolidated Control Layer Design and how to use it to determine the materials that will make the most efficient wall for your customers. We will define the Control Layers, discuss the Code Requirements for each layer, explain the Building Science behind the code requirements, and how that layer is related to the other (Thermal to Moisture, Moisture to Air, Air to Vapor, etc.) We will then discuss the Fire considerations that Impact Control layer design with today’s codes, including NFPA 285 Brief Overview as it has changed the way we design our above grade wall systems and types of continuous insulations that influence the design considerations with respect to fire and NFPA-285. Finally, solutions for consolidating these 4 layers for simplified design, superior performance, and long-lasting durability will be covered....
View the DuPont Performance Building Solutions Course Library
The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines)....
Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
Maximizing Envelope Performance with IMP-Integrated Components explores an advanced insulated metal composite panel building envelope system, components that have been engineered to integrate with the system - including windows, daylighting panels, sunshades, and louvers - and how the IMP system and integrated components combine to create a high-performance building envelope....
This course reviews the importance of weather-resistive barriers (WRBs): why they are critical and the technology considerations specifiers should use when evaluating WRB’s performance. It will also outline several of the most important building code and industry requirements related to air barriers and what they mean....
Fire safety and suppression are essential design features for building projects. This course explores how innovative water mist fire suppression systems can enhance occupant safety in homes while preserving aesthetics and minimizing water damage. Key design principles of electronically controlled water mist systems are examined, and their installation and maintenance are described. Also discussed is guidance for dealing with code officials when using these systems as an alternative to traditional fire sprinklers....
View the Plumis Manufacturers of Automist Course Library
Plumis Manufacturers of Automist
This course is part of one or more "Course Collections". Click here to view the details.
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality....
Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course discusses the benefits of PL safety products and the codes and testing standards related to PL way-finding systems....
View the Ecoglo Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
Roofing is one of the most common renovation projects on commercial buildings. Upgrading a roof assembly to meet current building standards provides an opportunity to save energy and maintain the necessary fire and structural performance. This course reviews the code requirements for commercial reroofing and discusses how reroofing can improve a building’s energy efficiency....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
The design of laser-cut steel, thermally broken windows and doors was fueled by the need to produce a steel window and door that would meet the ever increasingly stringent energy efficiency building codes of today and tomorrow, while not losing any of the “classic-timeless” aesthetics that steel windows and doors have become known for. This course examines the fabrication, thermal performance, and design and finish options of steel windows and doors....
Residential building envelope assemblies need to deliver a wide range of benefits – from reducing energy waste to maintaining occupant comfort to providing critical shelter during severe weather events. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used as part of residential envelope assemblies. This includes serving as the insulation layer in steep slope roofs, above grade walls, and below grade foundation assemblies. Topics include designing building and energy code-compliant residential envelope assemblies, solving performance challenges like reducing thermal-bridging and managing the threat of moisture intrusion, as well as reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
This course will provide an overview of resilient design and discuss how resilient design is not covered by typical building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. There will be examples given in the presentation of resilient design strategies....
This short version course introduces attendees to the basic materials and equipment used to create spray polyurethane foam. It will also discuss the safety aspect related to spray foam in terms of its application as well as its proper use to ensure code compliance. Lastly, it discusses the different kinds of spray foam commonly used and which material works best in different areas of a building....
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes....
View the Pacific Stair Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Displaying 164 - 188 of 341 results.
FIRST PREV [114-138] [139-163] [164-188] [189-213] [214-238] NEXT LAST