The federal government, more and more states and local jurisdictions are enacting regulations and building codes mandating the installation of solar PV or solar-ready design on new building construction. This will result in an accelerated growth of rooftop solar with an intent to reduce costs and maximize the energy output of solar installations. The key to complying with solar mandates is mastering solar and building integration. This means considering the roof and solar as a single system, as well as non-traditional design elements focused on the anticipation of rooftop solar installations. All structural analysis must include all the system elements and full load path, including solar mounting systems and roof structures. And finally, a look at case studies, storms and testing....
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants....
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements....
The presentation reviews a brief history of architectural IMP’s, current trends with comparisons to other materials and explores developments which will lead to future aesthetic possibilities and performance enhancements....
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings....
View the Panasonic Industrial Devices, Building Materials Group Course Library
Maximizing Envelope Performance with IMP-Integrated Components explores an advanced insulated metal composite panel building envelope system, components that have been engineered to integrate with the system - including windows, daylighting panels, sunshades, and louvers - and how the IMP system and integrated components combine to create a high-performance building envelope....
Recent changes in North America energy codes for the building envelope include higher insulation R-values, continuous insulation, and continuous air barriers for air leakage control. New, code compliant wall assembly design options may be susceptible to increased moisture sensitivity due to lower drying rates, which are inherent to energy efficient assemblies but could be further impacted by design detailing and materials choices. Improved energy efficiency does not need to come at the expense of the long term performance and durability of buildings. This seminar will address design options and materials choices for energy efficient and durable wall design. Design tools for advanced moisture analysis (WUFI®, Wärme und Feuchte Instationär, or Transient Heat and Moisture Analysis) will be used to show how to predict performance of untested new assemblies, how materials substitution could impact the overall performance of the building envelope, and how design detailing could increase moisture management capabilities....
View the DuPont Performance Building Solutions Course Library
This course will provide an overview of resilient design and discuss how resilient design is not covered by typical building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. There will be examples given in the presentation of resilient design strategies....
Newer energy codes require that homes be sealed and tested to 3-5 air changes per hour. Good home design and the right spec’s go along way to making that happen. Proper air sealing saves energy and reduces moisture and mold problems. In this advanced session 1 hour session building science expert Steve Easley uses pictures from the real world examples to illustrate what works and what doesn’t. Trying to fix a home that does meet these requirements is costly and time consuming, and improper sealing techniques can also lead to serious mold and moisture problems. Learn how to do it right the first time at the lowest cost, how to achieve the ”biggest bang for the buck" when prioritizing labor, and the best methods and materials to meet the newer code requirements....
View the DuPont Performance Building Solutions Course Library
The 2024 edition of the International Building Code® (IBC®) contains significant, helpful, and useful updates to fire safety provisions for exterior wall assemblies containing combustible components and combustible exterior wall coverings. Key changes include new and revised defined terms, new provisions clarifying when vertical and lateral flame propagation testing (NFPA 285) is required and provides three (3) prescriptive compliance methods. Several New sections were added for building materials such as Insulated Metal Panel systems (IMPs) and Building Integrated Photovoltaic (BIPV) systems for exterior wall coverings. Additionally, significant reorganization and revisions of Section 104 Duties and Powers of the Building Official were made that provide the building official with more clear guidance and tools to both interpret and enforce the building code. This presentation will combine an overview of fire safety requirements for exterior wall assemblies based on the 2021 IBC with explanations regarding updates that were made to the 2024 IBC....
View the North American Modern Building Alliance Course Library
Stairs are an important component in buildings, facilitating traffic flow and serving as a means of egress in emergencies. They can also pose a safety risk if not designed and outfitted properly. In this course, we address the safety aspects of stair design and specification, providing an overview of anti-slip products for new and existing stairways. Also discussed are the various codes and standards related to stair design and photoluminescent egress path markings and the available solutions to ensure code compliance and the subsequent well-being of users. Finally, we look at installation and anchorage options....
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
This course covers two widely used acoustic metrics, the STC and IIC ratings. Although these ratings are required by building codes and frequently used, they are still often poorly understood and there are many myths and misconceptions around their use. This course looks “under the hood” of the STC and IIC ratings to get a better understanding of what they are, how they work, and what they do and don’t tell us. Importantly, this course covers shortcomings of the STC and IIC ratings that if not understood can lead to poor designs for noise control. In that vein, this course also looks at two new acoustic ratings, HIIC and LIIC, that provide a better insight into the impact-noise reduction provided by floor/ceiling assemblies. Finally, the course uses the knowledge gained about ratings to discuss general methods of improving the acoustic performance of floor/ceiling assemblies....
When daylighting a space, there are endless ways to go about it. With the power of daylight simulation, you can make informed decisions about material selections, placement and opening sizes, as well as building geometries. Modeling allows you to compare multiple designs to see how they will perform, while verifying light levels, potential glare and code compliance. Learn how we can help....
It is imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Explore specialized materials, code compliance, and the unique environmental demands of mission-critical facilities to optimize energy efficiency and building resilience. Learn about the unique fire risks and environmental demands of data center operations. Evaluate how product solution choices affect energy efficiency, installation, maintenance, and risk management....
3M - Building Protection - Air Barrier, Fire Barrier, and Insulation Moisture Barrier/Jacketing
When considering the building enclosure, fire safety is an important design factor and needs to be considered hand-in-hand with energy code requirements. The NFPA 285 “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components” is a critical consideration with modern building assemblies incorporating combustible materials in non-combustible construction. This presentation will review the history and scope of the NFPA 285 test standard, and its adoption within the International Building Code (IBC). It will outline the criteria for compliance, as well as identify triggers and contributors under the standard. The presentation will review how the selection building components such as insulation, air/water resistive barriers and claddings, can affect the fire performance of an assembly, and identify solutions and common paths for compliance....
View the DuPont Performance Building Solutions Course Library
All the new energy codes are requiring or moving towards exterior insulation for exterior walls to increase energy efficiency and reduce the energy losses due to thermal bridging. This class examines how to design and build high performance wall assemblies that deliver significant increases in energy efficiency and do not lead to trapping water and moisture related failures. The class will also show practical approaches to advanced framing as well as specific installation protocols to prevent insulation installation related degradation which is 30% for typical installations. Steve Easley will use pictures from real world installations to illustrate the do’s and don’ts to building high performance wall assemblies that are affordable and cost effective. This interactive class is designed to sort through the myriad of insulation system options in order to match the best insulation system to the type of structure. This class also will show latest FMA/AAMA/WDMA 500-16 installation standards for integrating exterior insulation with weather barriers and window flashing. Additional content will provide information on water, air and vapor barrier code requirements in order to develop appropriate specifications to meet these new codes and create buildings that perform with better real-world results....
View the DuPont Performance Building Solutions Course Library
The presentation will the concept of Consolidated Control Layer Design and how to use it to determine the materials that will make the most efficient wall for your customers. We will define the Control Layers, discuss the Code Requirements for each layer, explain the Building Science behind the code requirements, and how that layer is related to the other (Thermal to Moisture, Moisture to Air, Air to Vapor, etc.) We will then discuss the Fire considerations that Impact Control layer design with today’s codes, including NFPA 285 Brief Overview as it has changed the way we design our above grade wall systems and types of continuous insulations that influence the design considerations with respect to fire and NFPA-285. Finally, solutions for consolidating these 4 layers for simplified design, superior performance, and long-lasting durability will be covered....
View the DuPont Performance Building Solutions Course Library
This course reviews the evolution of accessible restrooms and the recent, sudden prominence of universal (or adult) changing tables. We’ll examine how new changes to both the International Building Code® and statewide legislation affect public restroom design, and the profound impact universal changing tables can have on the lives of people with disabilities and their caregivers....
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an overview of expanded polystyrene (EPS) insulation and innovative roof systems that are designed to enhance building efficiency....
Polyisocyanurate (polyiso) insulation is one of North America’s most widely used, readily available, and cost-effective insulation products. While polyiso is currently most commonly known for its use on roofs and walls, this course focuses on the many benefits of using it in below-grade installations in order to meet energy codes, maximize the building foundation’s thermal performance, and extend the overall life of the structure. The course explores the requirements for three primary characteristics of any below-grade insulation—thermal performance, water absorption, and load capacity—and describes how polyiso meets or exceeds those requirements and protects the foundation waterproofing system....
View the Rmax - A Division of the Sika Corporation Course Library
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
Birds provide billions to our economy, yet bird populations are crashing, with collisions with glass a primary cause. Whether looking through glass at habitat beyond, or flying towards reflected habitat, birds collide at flight speed with fatal results, often days later, from internal injuries. Birds collide with glass on structures of every size, from shacks to skyscrapers, in urban, suburban and rural areas. Advances in technology are increasing use of glass curtain walls and other large glass features, increasing the rate of mortality. We will describe materials that can make buildings safe for birds without sacrificing light, appearance or view clarity. In 2011, San Francisco was the first U.S. city to require bird-friendly design for some new construction. The LEED Pilot Library added a credit for reducing bird collisions the same year and that has since been added to the primary credit system. Over 20 jurisdictions at levels from state to town, have now mandated bird-friendly construction and more are pending. Notably New York City, in 2019, adopted code requiring bird-friendly design for all new construction. We review use of the LEED credit and important features of legislation across the U.S. and Canada. This class explains how to recognize and remediate hazards to birds in the built environment. We illustrate how many strategies for controlling heat and light, and even security, can also reduce bird mortality. Techniques now in use for evaluating the relative threat level to birds of different materials are described, along with typical results. Resources, like American Bird Conservancy’s searchable database of bird-friendly materials are reviewed....
Displaying 165 - 189 of 342 results.
FIRST PREV [115-139] [140-164] [165-189] [190-214] [215-239] NEXT LAST