Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an over...
This session will explore the most common issues that are alleged in construction defect cases. The presentation will guide the attendees through construction basics from the roof to the foundation. The most common defects in each area will be discussed, along with building code requirements, accepted industry standards, consequences and/or damages...
Railing systems perform various functions, meeting safety requirements and serving as a key component of a building’s aesthetic. This course includes a discussion of the strengths and weaknesses of aluminum and structural vinyl railing systems, how they are made, and how they are used in the building industry, including a detailed summary of how ...
View the rdi Railing Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Rooftop HVAC equipment, waste receptacles, and other necessary but unsightly equipment are common in today’s commercial industries. Rooftop and ground screening can provide a solution for meeting code requirements while improving building aesthetics. In addition, screens may improve a property’s safety and security and establish privacy boundar...
View the CityScapes Architectural Innovations Course Library
Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the f...
View the AEC Daily Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control...
The spread of smoke in mid- and high-rise building fires is recognized as a major threat to the safety of the building occupants and responding fire personnel and the effectiveness of firefighting operations. This course explains how smoke migrates in a multistory building fire and discusses how building codes have evolved to address this danger an...
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and co...
This course covers how to comply with the most stringent Energy Code requirements using pre-fabricated wall panels and components featuring next generation concrete masonry unit designs....
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as...
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, bo...
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that ...
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meet...
Exterior trim plays a crucial role in both the function and appearance of a building, which in turn impacts occupant safety and well-being. This course provides an overview of exterior trim functions and common material options available today. Also discussed are product evaluation reports and their role in code compliance; sustainability considera...
Stairs are an important component in buildings, facilitating traffic flow and serving as a means of egress in emergencies. They can also pose a safety risk if not designed and outfitted properly. In this course, we address the safety aspects of stair design and specification, providing an overview of anti-slip products for new and existing stairway...
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain ...
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and w...
View the Resilient Floor Covering Institute Course Library
Resilient Floor Covering Institute
This course is part of one or more "Course Collections". Click here to view the details.
One hour seminar detailing the use of Expansion Joint Covers. Designed to broaden knowledge of joint movement and proper joint sizing to ensure there is no structural damage or life safety issue. Contains an overview of both interior and exterior Expansion Joint Covers and which are most appropriate for certain conditions. Fire barriers are discuss...
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create ...
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
There are a multitude of building envelope products used and a variety of methods taken for achieving energy and building code requirements. Understanding the different roles a product plays in the envelope simplifies its design. In this course, we take a look at the code requirements for buildings classified as IBC Types I–IV, paths to achieving...
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Dual-flush wall-mounted toilets help create modern, stylish bathrooms that strike a balance between sustainable water efficiency, flexible design, and space savings. This course compares this style with other traditional types of toilets, discusses how wall-mounted toilets benefit commercial and residential users, and explains how they satisfy the ...
Insulating concrete form (ICF) products use a cost-effective and robust structural material option (reinforced concrete) to turn a building envelope into a high-performing thermal, moisture, and air enclosure with disaster resistance and built-in compliance with energy code requirements. As a result of ICF performance, building owners can complete ...
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-eng...
View the Pacific Stair Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Helps provide the design community with a better understanding of the model energy code requirements for insulation in metal buildings, how codes are changing, including requirements for continuous insulation and air barriers along with considerations when selecting the right insulation....
View the DuPont Performance Building Solutions Course Library
Demand for safety, energy efficiency, and contemporary aesthetics is driving building envelope design that incorporates increased amounts of combustible material in cladding, insulation, and water-resistive barriers. This course outlines the difference between insulated metal panels (IMPs) and aluminum composite material (ACM) panels, discusses rea...
Displaying 171 - 195 of 218 results.
FIRST PREV [96-120] [121-145] [146-170] [171-195] [196-218] NEXT LAST