When considering the building enclosure, fire safety is an important design factor and needs to be considered hand-in-hand with energy code requirements. The NFPA 285 “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components” is a critical consideration with modern building assemblies incorporating combustible materials in non-combustible construction. This presentation will review the history and scope of the NFPA 285 test standard, and its adoption within the International Building Code (IBC). It will outline the criteria for compliance, as well as identify triggers and contributors under the standard. The presentation will review how the selection building components such as insulation, air/water resistive barriers and claddings, can affect the fire performance of an assembly, and identify solutions and common paths for compliance....
View the DuPont Performance Building Solutions Course Library
The spread of smoke in mid- and high-rise building fires is recognized as a major threat to the safety of the building occupants and responding fire personnel and the effectiveness of firefighting operations. This course explains how smoke migrates in a multistory building fire and discusses how building codes have evolved to address this danger and why they mandate smoke containment in specific areas of a structure. Product applications and assemblies designed to meet building code requirements and limit vertical smoke migration via elevator hoistways and lobbies are examined....
Modular metal panels (MMPs) integrate advanced technology with modern aesthetics, providing high-performance building envelopes that enhance design and durability. This course explores the evolution of MMPs and what distinguishes them from other building products. You will examine the key components that make up the system and its fundamental principles and best practices. Finally, the course demonstrates how these elements combine in real-world applications, showcasing various design options....
Recent changes in North America energy codes for the building envelope include higher insulation R-values, continuous insulation, and continuous air barriers for air leakage control. New, code compliant wall assembly design options may be susceptible to increased moisture sensitivity due to lower drying rates, which are inherent to energy efficient assemblies but could be further impacted by design detailing and materials choices. Improved energy efficiency does not need to come at the expense of the long term performance and durability of buildings. This seminar will address design options and materials choices for energy efficient and durable wall design. Design tools for advanced moisture analysis (WUFI®, Wärme und Feuchte Instationär, or Transient Heat and Moisture Analysis) will be used to show how to predict performance of untested new assemblies, how materials substitution could impact the overall performance of the building envelope, and how design detailing could increase moisture management capabilities....
View the DuPont Performance Building Solutions Course Library
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®)....
View the Resilient Floor Covering Institute Course Library
Resilient Floor Covering Institute
This course is part of one or more "Course Collections". Click here to view the details.
Commercial building interiors see all kinds of wear and tear on a daily basis. Various forms of wall protection can combat this wear and tear to help extend the longevity of a space, maintain a clean look, and cut down on maintenance costs. This course discusses the different wall protection products available, how to identify which wall protection products fit certain applications, and which building codes apply to these products....
View the Construction Specialties Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes....
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method....
View the North American Modern Building Alliance Course Library
Conventional building practice consists of single functional materials combined to serve the building design needs. For example, an air barrier is a distinct and separate layer, and water resistive barrier is often a separate layer. New designs concepts where multiple functionality, such as air and water barriers, can be met at the same layer per building code will be discussed. In particular, if insulated foam sheathing is used, appropriate joint treatment can enable compliance as air, water, and thermal barriers. Both conventional solid (peel and stick), and new fluid applied flashing and barriers will be discussed. Participants will also gain an understanding of material options and impact of application techniques on long term building performance....
View the DuPont Performance Building Solutions Course Library
Restrooms and other plumbing applications must comply with accessibility regulations, but do you know exactly how to do that? This course is a handy reference that explains what codes and regulations you must satisfy, when those requirements apply to new construction and alterations, and how to select and install fixtures to meet accessibility standards and the requirements of the LEED® v5 for Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
View the Zurn Elkay Water Solutions Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control such designs; and the various options designers can use to design safe, appealing outdoor roof paving systems that will withstand even the strongest winds....
Reducing noise between occupied spaces isn’t just needed for occupant comfort and productivity, it is sometimes required by building code. This presentation is an overview of noise control principals, construction composites, and design methodology for ceilings, floors, and partitions. A special emphasis is placed on performance-oriented designs requiring third party consultants....
Fire safety is an important building enclosure design factor and needs to be addressed hand-in-hand with energy code requirements. NFPA 285 is a critical consideration with modern building assemblies incorporating combustible materials in noncombustible construction. This presentation reviews the history and scope of the NFPA 285 test standard and its adoption into the International Building Code® (IBC®). The compliance criteria are outlined, and triggers and contributors under the standard are identified. The course also reviews how the selection of building components such as insulation, air-/water-resistive barriers, and claddings affects the fire performance of an assembly, and solutions and common paths for compliance are presented....
View the DuPont Performance Building Solutions Course Library
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online....
The presentation reviews a brief history of architectural IMP’s, current trends with comparisons to other materials and explores developments which will lead to future aesthetic possibilities and performance enhancements....
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
The purpose of this course is to educate architects and designers on the ideal ways of incorporating entrance flooring into commercial buildings to promote a safe and clean environment. The course explains codes, regulations and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate and other commercial settings....
Presented by a subject matter expert on behalf of CENTRIA, a Nucor company. As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
The use of life safety dampers is driven by requirements in various building codes. There are many different applications for which fire, fire/smoke, smoke, and/or ceiling radiation dampers can be used, each having its own specific purpose and unique installation requirements. This course gives an in-depth look at the different types of dampers and explains how and where they're each used and installed....
View the Mestek Commercial Damper and Louver Group Course Library
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope....
Life-safety systems encompass both passive fire-protection features, like compartmentation and firestopping, and active ones, such as sprinklers and alarms. Portable fire extinguishers are an integral part of life-safety systems and must meet code-mandated number and placement requirements in most building types. This course looks at how fire extinguishers can be stored safely and securely in cabinets and addresses specification considerations. Also reviewed are the many options available to customize fire extinguisher cabinets so they are tailored to each project’s needs and design goals....
View the Morris Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course defines and explains building science behind the code for the four control layers of the building envelope: water, thermal, air and vapor. There will be a detailed overview of air leakage, why it matters in a sustainable envelope and why air barrier continuity is critical to building performance. Participants will be asked to explore typical design principles for addressing the four control layers within the wall assembly. Finally, there will be an in-depth discussion of the critical interfaces, how to detail them and test them to ensure continuity of the control layers for the entire building....
View the DuPont Performance Building Solutions Course Library
Displaying 176 - 200 of 341 results.
FIRST PREV [126-150] [151-175] [176-200] [201-225] [226-250] NEXT LAST