A high-performance building envelope, such as one made with architectural insulated metal panels (IMPs), serves as the building’s primary defense against environmental elements and protects the health and well-being of its occupants. This course reviews the components and benefits of IMPs, which offer all four control layers—air, vapor, thermal, and water—within a single component, delivering superior thermal performance and high-end design....
Beyond being code required, discuss the importance of air barriers and their impact on energy efficiency and indoor air quality. This course evaluates common installation challenges of various technologies and how to overcome them to reduce construction delays and innovations in fluid applied waterproofing technologies to show a path forward for designers seeking higher-performing wall assemblies. This course also uses several specific, yet common, details to discuss sequencing of materials to achieve air barrier continuity while also managing moisture....
Choosing the right insulation for your roof can have lasting impacts on the building performance and energy conservation. This presentation explains the different types of commercial insulation, long-term performance and liabilities, re-usability and sustainable roof design approaches for long term owner, occupant and maintenance benefits....
View the DuPont Performance Building Solutions Course Library
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings....
Mitigating thermal bridges in building envelopes is a major new thrust for improving the thermal performance of buildings. This presentation explains the types of thermal bridges, their impacts, how to account for them, and practical ways to address them with efficient detailing and insulation strategies, including continuous insulation....
View the DuPont Performance Building Solutions Course Library
This course defines and explains building science behind the code for the four control layers of the building envelope: water, thermal, air and vapor. There will be a detailed overview of air leakage, why it matters in a sustainable envelope and why air barrier continuity is critical to building performance. Participants will be asked to explore typical design principles for addressing the four control layers within the wall assembly. Finally, there will be an in-depth discussion of the critical interfaces, how to detail them and test them to ensure continuity of the control layers for the entire building....
View the DuPont Performance Building Solutions Course Library
Architectural insulated metal panels (IMPs) are an increasingly popular choice for building developers and architects, presenting a compelling solution that combines functionality, efficiency, and aesthetic appeal. This course reviews the architectural IMP, its applications and benefits, and comparisons to other materials. It explores current trends and developments that are paving the way for increased aesthetic possibilities and building envelope performance....
This presentation includes information on continuous insulation performance and specific detail on polyisocyanurate insulation, an overview of the history of foam plastic insulation in the building codes, and a detailed review of the 2021 International Building Code’s fire safety requirements for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I-IV), including the NFPA 285 fire test standard....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF....
Rough openings will leak - learn how to properly sequence rough opening installation materials and allow the “leaks” to drain out and away from the building structure....
This presentation will focus on the science of noise control, specifically covering full system principles, building philosophy, and the most overlooked component when assembling such systems. The course will also highlight the forces that create the need for noise control systems, and how those forces shape how we approach these systems....
This presentation will discuss the importance of a properly prepared substrate for floor covering installation. Accurate floor preparation helps keep floors leveled, sealed, durable and long-lasting, which can reduce cost and material consumption in construction. The presentation provides an overview of the history of gypsum, best floor installation practices and latest technology in the substrate market....
In this presentation, participants will learn about NFPA 285 and how it is used to assess the fire performance of exterior wall assemblies containing combustible materials. A brief historical review of NFPA 285 development will be provided so participants understand the basis for the test method development as well as how it is applied and what are the limitations. Recent, significant changes that have been made to NFPA 285 to standardize the testing and evaluation of deviations in project wall assemblies from tested assemblies will be reviewed in the context of how this affects compliance. Examples of this engineering evaluation process using current Engineering Analysis documents will be provided to illustrate how changes in materials and configurations can affect compliance with NFPA 285. The reasons behind the regular changes to product engineering evaluation reports will be discussed to highlight the importance of using the most up-to-date materials, configurations, and constructions....
View the DuPont Performance Building Solutions Course Library
From pitched to low-slope roofing, a myriad of designs are possible. Conventional roofing with the waterproofing membrane located weather-side and protected membrane roofing with the waterproofing membrane located at the deck can be used on buildings of various end uses. Roofs can be low or high albedo to impact solar gain; add to this vegetative roof assemblies (green roofs), roofs with solar arrays, and blue roofs (stormwater management), and no two roofs are alike. Join us to review the modern roof taxonomies and associated benefits and drawbacks, learn about the latest options in roof construction, and reflect on performance differences....
View the DuPont Performance Building Solutions Course Library
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum thermal performance....
No discussion about a material’s sustainability is complete unless it addresses embodied carbon, the carbon dioxide (CO₂) emissions associated with the material over its cradle-to-grave life cycle. Changes made to spray polyurethane foam (SPF) insulation formulations address the impacts of embodied carbon. This course explores the evolution and environmental impacts of SPF blowing agents, the performance benefits of SPF, physical property testing and certifications, and SPF’s potential LEED® v4 contributions. Case studies make evident the performance value of SPF....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology....
This course presents the History of Rainscreen design and explains why rainscreens are an important topic for the building envelope and enclosures. This course enforces the use of control layers to maximize the use of a drained, backed ventilated rainscreen system performance for both new and existing buildings. The audience will learn and be able to identify different rainscreen technologies and how a complete approach is beneficial to a building’s performance, by ensuring compatibility among components and understanding the relationship of control layers of the exterior wall assembly for the health and safety of occupants. Lastly, the course will review this approach using real-world rainscreen systems....
This course details the benefits and selection process of Magnesium Oxide (MgO) sheathing in multifamily and commercial construction. MgO sheathing offers structural, fire, and other properties that enable architects and designers to simplify the design and installation of building enclosures. Comparisons of MgO sheathing versus traditional sheathing materials such as gypsum are included....
View the DuPont Performance Building Solutions Course Library
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
As interest in cross-laminated timber (CLT) buildings grows, the market for building enclosure products as a whole has yet to fully provide the water-resistant barriers, vapor retarders, and air barriers to optimally support the unique characteristics of wood. Furthermore, there are few building enclosure design guides specific to detailing wood-framed walls and roofs. This comprehensive course fills the gaps, providing detailed information on mass timber, building enclosure issues, the vapor-permeable technology available to address wood’s unique moisture characteristics, and a how-to guide on detailing the walls and roof of the enclosure....
Engineering Judgement are a necessary tool to provide and ensure the fire protection and life safety of buildings. The exponential number of wall assembly combinations and detailing of enclosure assemblies in the built environment prevents the opportunity to confirm fire performance through direct testing. This is especially true with the required investment of time, effort, and cost of larger scale tests such as NFPA 285. Qualified Fire Engineering teams in partnership with third-party labs and the product manufacturers offer the opportunity to extend successful test results beyond the tested specimen through a Letter of Engineering Judgement. This presentation will discuss the opportunity, challenges and limitations present when considering acceptance of test data extended to support substitution or modification to an assembly....
View the DuPont Performance Building Solutions Course Library
An introductory course on spray polyurethane foam (SPF) that covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction across the US and Canada markets, as well as safe SPF installation practices. Participants will come away with a strong knowledge of how the proper use and application of spray foam can improve the efficiency, quality and durability of the built environment....
Displaying 184 - 208 of 414 results.
FIRST PREV [134-158] [159-183] [184-208] [209-233] [234-258] NEXT LAST