Mineral wool core panels provide an excellent alternative to foam core insulated metal panels and other traditional materials where the wall assembly need to be fire resistive. Ratings of up to three hours can be achieved by this product. These panels also provide all necessary control layers in a single component: air, vapor, water and thermal. Acoustic properties of the product are also evaluated. Product configurations including sizes, profiles and metal facings are studied. Code compliance and generic details are reviewed. Mineral wool core panels and their contribution to LEED credits are also studied....
Introduction to various types and options in the market place for Specialty siding materials....
Architectural acoustic design focuses on managing airborne and impact sound within indoor and outdoor spaces. This course addresses the acoustic challenges associated with outdoor recreational spaces, focusing on the surge in pickleball popularity. Participants will learn the fundamentals of sound propagation in open-air environments and explore how modern acoustic products can reduce unwanted noise while maintaining functionality and the design intent. Acoustic solutions for indoor spaces requiring noise reduction are also covered, as well as the role of acoustic barriers in meeting the requirements of the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options....
View the DuPont Performance Building Solutions Course Library
Critical to concrete waterproofing are the products used in combination to create a system that ensures complete control of moisture migration. Presented here are effective concrete waterproofing technologies and how they improve the durability and lifespan of structures. Discussions include water penetration, system selection, membrane protection, and cementitious waterproofing....
This presentation will review the basics of spray polyurethane foam chemistry, application, safety, code compliance, and building performance. It discusses safety requirements during the foam application, how spray foam can contribute to improved indoor air quality by reducing air leakage, how spray foam creates a more comfortable environment, and improves a buildings energy efficiency leading to reduced energy consumption and lowering a buildings impact on the environment....
This course focuses on building connectors, providing an understanding of deflection and its importance in accommodating movement. Participants will learn about various types of deflection and drift clips used in the industry. The course also explores different support clips suitable for rigid attachments in building construction, as well as specialty clips and connectors that enhance performance and durability. Additionally, participants will explore labor-saving products available in the industry to improve efficiency and speed during construction. Finally, the course familiarizes participants with industry tools designed to aid in the design of connectors for building structures, equipping them with the knowledge needed to make informed decisions and ensure the stability and durability of buildings....
Modern roof systems and envelope assemblies (both commercial and residential) may need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the building envelope has an important role to play, including the insulation layer. This presentation introduces the key benefits and attributes of polyiso roof insulation products, polyiso continuous insulation products used for above grade wall assemblies and below grade applications, and continuous insulation products used as part of residential envelope assemblies (steep slope roofs, above grade walls, and below grade foundation). Topics covered include: • Designing building and energy code-compliant roof assemblies and commercial and residential envelope assemblies. • Solving performance challenges like ponding water on roofs. • Solving performance challenges like thermal bridging and managing the threat of moisture and air intrusion in commercial and residential building envelope assemblies. • Reducing the environmental impacts of buildings with roof systems and envelope assemblies that contain polyiso insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
This short version course introduces attendees to the basic materials and equipment used to create spray polyurethane foam. It will also discuss the safety aspect related to spray foam in terms of its application as well as its proper use to ensure code compliance. Lastly, it discusses the different kinds of spray foam commonly used and which material works best in different areas of a building....
An introduction to the use of Polyisocyanurate insulation to provide a Continuous Insulating Air & Water Resistive Barrier, providing energy efficiency, fire safety, sustainability, and a healthier indoor environment....
View the Rmax - A Division of the Sika Corporation Course Library
What roof type is ideal for photovoltaic (PV) system mounting? What about “solar zone,” roof orientation, environmental and collateral loads, system sizing, the building enclosure, and life-cycle cost analyses? All these factors affect the sustainability and financial pro forma of the roof and PV system. New technologies can be daunting. When it comes to PV design, small shifts in thinking can bring the things that matter into focus, producing huge savings and production efficiencies for improving the client’s overall ROI. This presentation will review and discuss the concepts of treating the roof and PV system as a single asset with supporting ROIs and IRR. Upon this review, participants will have a better understanding of the numbers regarding the ROI and IRR....
There are many kinds of resin-based coatings for metal. The type of resin used plays an important role in determining a coating's durability and physical properties. This course discusses these coatings and their application techniques. It also discusses why the coatings may deteriorate and how to measure the performance of the coatings. The role that resin-based coatings perform in cool roofs is explored along with the standards that measure the sustainability of cool roofs. This course provides the information one needs to ensure that the coated product will perform as expected and provide a durable, long-lasting finish....
In this focused one-hour session, gain a clear understanding of the design, specification, and installation processes for joint sealants in high-performance building enclosures. Learn how selecting the right sealants for vertical and horizontal joints can enhance durability, efficiency, and occupant safety. This course emphasizes the critical role of proper joint design and installation in improving building health and performance, ensuring a safer environment for occupants....
Vinyl membrane decking can prolong the life cycle of various building components; however, performance and durability depend on vinyl membrane selection, specification, and installation. Fortunately, vinyl membrane manufacturers can support architects, contractors, and specifiers through all phases of the project to ensure a successful outcome. This course examines walkable, waterproof roof deck membranes and roofing systems and includes discussions on system characteristics, design considerations, and how to properly specify roof deck membrane systems. ...
View the Duradek/Durarail Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This panel discussion explores building sustainable designs for energy efficiency, water efficiency and stormwater management starting from the roof. With urban heat island effect compounding the global warming from climate change, we are in urgent need of understanding how the roof can be very effective in delivering sustainable, high performance buildings while incorporating stormwater Best Management Practices (BMPs). Smart material choices and quality and environmental performance certifications are part of assuring performance meets design intent. In addition, job site pain points and project insights for maximizing building design performance will be shared....
View the DuPont Performance Building Solutions Course Library
Green or vegetative roof systems have become an effective means to address aesthetic and environmental issues and provide energy savings for building owners, while at the same time providing protection for a building and its contents through the use of a high-performance waterproofing system. This program describes the basics of vegetative roof systems and outlines some cost and construction considerations for designers....
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
Provides an overview of the performance characteristics and benefits of using multi-layer, cellular PVC decking—a durable decking material that replicates the unique beauty of exotic hardwood....
Good acoustic environments are important to the general well-being of all building users. This course outlines the benefits of creating them with wall and ceiling acoustic treatments. It includes many acoustic wall and ceiling treatment options and sample installations....
As incidents involving active shooters and gun-related assaults continue to increase, more buildings are adopting ballistic-rated products to enhance occupant safety. This course explores various levels of ballistic protection, relevant product testing standards, available solutions, and best practices for designing buildings that mitigate ballistic threats and safeguard both people and property....
View the USBP - United States Bullet Proofing, Inc. Course Library
Vacuum insulation panels (VIP) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R Values for the enclosures required by the energy codes without having to increase the thickness of walls roofs or floors. This course discusses how VIPs work, why they are effective and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIP's as thermal insulation in the design of energy-efficient buildings...
View the Panasonic Industrial Devices, Building Materials Group Course Library
From the presenters of “Maintaining Continuous Insulation and AWBs at Transitions” comes the next detailing presentation in the series. This presentation expands on integrating insulation and air barriers using the previously described building science fundamentals but applied to some trickier details. How do you integrate continuous insulation at a foundation where the masonry veneer must rest on concrete foundation walls? How do you attach heavy, but combustible, low mass veneers? Join us to find out....
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission....
View the PAC International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance....
Based on published studies, a vented rainscreen assembly provides the following for a wall assembly: • Effectively drain water that has entered behind the cladding • Reduces the wet time of absorptive claddings • Increased drying of the interstitial wall assembly • Mitigate reverse vapor drive for highly permeable Water Resistant Barrier / Air Barrier (WRB/AB) systems Learn the current research and field practices on vapor open (permeable), vented rain screen cladding wall assemblies and their impact to mitigate water long-term intrusion and enhance the drying capacity of the building envelope assembly for the life of the building....
