This presentation explores exterior wall design performance; energy code requirements; influences of air, moisture, thermal, and vapor barriers; and actual project case studies are presented. This program will be an interactive session that encourages feedback and questions....
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decision on the use of these popular cladding systems. We will review how these products have been addressed in the development of the International Building Code, including their applications in both combustible and noncombustible structures as well as single and multi-story construction. The program will conclude with a look at the various third-party product listings, evaluation reports, and engineering judgements used to evidence compliance with the International Building Code....
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques....
Discover the characteristics, benefits and design options for commercial and industrial buildings using insulated metal panels (IMPs). Recognize the factors affecting panel spans and the relationship of these to structural supports. Gain knowledge of IMP code compliance....
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided....
View the Isolatek International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285....
View the North American Modern Building Alliance Course Library
Security entrance control is essential to manage the flow of visitor and authorized user traffic through secured or restricted areas. A wide range of products with multiple types of technologies are available, and a host of buzz words describing their operation abound in this industry. Join us as we journey through the range of products, their operation, the level of security they provide, and both building code and ADA compliance. Security entrance control enhances the safety and peace-of-mind for of employees, residents, passengers, customers, visitors, etc. by providing automatic security screening of those who try to enter and exit the secured space. This secured space may be a campus, an entire building, or designated area within the building. Security entrance control occurs at office and residential buildings, healthcare facilities, entertainment complexes, transportation facilities, campuses, shopping locations, and anywhere that people enter and exit. The security entrance combined with credentialing equipment and software that limits use to only authorized personnel, make for a seamless passage into a secure area. Not only do security entrances control access and/or egress, they provide a visual presence that serves as a deterrent. SECURITY IS A MUST IN TODAY’S WORLD....
In today’s high performance building market, specifying materials that work together as a complete wall system is more critical than ever. Systems can help designers meet new energy codes, reduce costs and improve building function and sustainability while making the design process faster and simpler. This course will educate participants on the functional components and system attributes of the most common exterior wall system, steel stud with masonry veneer. The course will detail key system components such as continuous and stud cavity insulation, air/water resistive barriers, air sealing practices, masonry wall ties and water drainage/management practices. Key codes and standards will be reviewed to define system interaction and key specification practices to ensure wall system designs are consistent with recent advances in building analysis, new code requirements, revised test methods, and a comprehensive, systems approach to wall systems....
Fire safety and suppression are essential design features for building projects. This course explores how innovative water mist fire suppression systems can enhance occupant safety in homes while preserving aesthetics and minimizing water damage. Key design principles of electronically controlled water mist systems are examined, and their installation and maintenance are described. Also discussed is guidance for dealing with code officials when using these systems as an alternative to traditional fire sprinklers....
View the Plumis Manufacturers of Automist Course Library
Plumis Manufacturers of Automist
This course is part of one or more "Course Collections". Click here to view the details.
When daylighting a space, there are endless ways to go about it. With the power of daylight simulation, you can make informed decisions about material selections, placement and opening sizes, as well as building geometries. Modeling allows you to compare multiple designs to see how they will perform, while verifying light levels, potential glare and code compliance. Learn how we can help....
The Builders Hardware Manufacturers Association (BHMA®) is the only organization accredited by the American National Standards Institute (ANSI) to develop and maintain builders hardware standards with cycling, operational, strength, security, and finish test requirements. This course explores the performance standards and the certification program related to commercial architectural hardware....
View the Builders Hardware Manufacturers Association Course Library
Builders Hardware Manufacturers Association
This course is part of one or more "Course Collections". Click here to view the details.
Conventional building practice consists of single functional materials combined to serve the building design needs. For example, an air barrier is a distinct and separate layer, and water resistive barrier is often a separate layer. New designs concepts where multiple functionality, such as air and water barriers, can be met at the same layer per building code will be discussed. In particular, if insulated foam sheathing is used, appropriate joint treatment can enable compliance as air, water, and thermal barriers. Both conventional solid (peel and stick), and new fluid applied flashing and barriers will be discussed. Participants will also gain an understanding of material options and impact of application techniques on long term building performance....
View the DuPont Performance Building Solutions Course Library
Provides an overview of the Industry Standards, as well as Code References, for the flashing materials used for the installation of Windows & Doors. The Code referenced material standards for window & door flashings are summarized and compared, as well as the Installation Standard practices that have been developed by the three main Fenestration Industry organizations. The Window & Door installation standards and principles presented, are also demonstrated through hands-on application using standard flashing materials with a focus on Commercial and Multi-Family Buildings....
View the DuPont Performance Building Solutions Course Library
This course defines and explains building science behind the code for the four control layers of the building envelope: water, air, thermal, and vapor. Participants will then explore typical design principles as well as alternative system assembly approaches to exterior wall design. In addition, presentation covers common attachment strategies for various types of claddings, including masonry, rain screen veneers, and applied/adhered veneers....
View the DuPont Performance Building Solutions Course Library
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology....
Foam plastic insulation materials, such as spray foam and rigid foam board, gained popularity after the 1970s oil crisis as energy‑efficiency solutions. While energy efficiency remains central to building codes, expectations now also include reducing carbon emissions to support building decarbonization. This course examines the embodied carbon of insulation materials and their role in reducing operational energy use, enhancing building resilience, improving community well-being, and supporting sustainable, resource‑efficient design....
Building codes will help protect lives for new building construction. Our complete luminous egress path marking system for new construction, and existing buildings, exceed the requirements of the International Building Code and International Fire Code. Could the tenants in your existing building benefit from adding luminous egress? Will there be a situation where the power is out, and they need to get out safely? We offer a COMPLETE one-source luminous egress package with unique design features to produce a superior result, like our Photo-Glo® “golf ball” plastic, our patented Construction Covers and Exit Door Kits....
Fortress Building Products is an innovative building products manufacturer focused on supplying and servicing the growing railing, fence, and building product industries in North America. It consists of Fortress Railing Products and Fortress Fence Products divisions as well as an associate company, OZCO Building Products. ...
Mars Air Systems is the international leader in high quality air curtains and air doors that help make buildings comfortable, sanitary, and energy efficient. Utilizing industry-leading tools and services, Mars provides architects, engineers, food service consultants, and other specifiers with the most comprehensive air curtain/air door solutions, while giving building owners the peace of mind of a reliable product and dedicated support....
Sarah Andrews of Sustainable Solutions, based in Florence, Texas, is a green building consultant offering training for construction professionals. She has more than five years of experience in green building in addition to 20 years working as an educator. While most building consultants only offer green construction training online, Sarah is one of the few who provide this type of training live and in person. Her curriculum is high–quality, and she utilizes her education degree and strong understanding of the subject matter to help you stay up–to–date with the changes that are occurring in the construction industry as green building becomes more prominent and required. By keeping up with the latest information and requirements in this rapidly changing field, she is able to update you on the current industry standards and practices. This makes it easier for you to fulfill your contractual obligations, certification, and documentation....
Stone Farm is the nationwide leader in reclaimed stone and brick building materials. We love finding new things...specifically unique and reclaimed building materials. We are a team of experts, treasure hunters and curators who source pieces of history for in and around your home. Whether it is a street in Europe, the Big Dig in Boston, an old school house or mill, we scour the world to find, harvest and re-purpose distinctive building materials, such as natural stone and reclaimed thin brick veneer, for your project....
We make and deliver building materials for the residential and commercial construction industry. As a North American producer of engineered wood products, panels, and lumber, our customers can count on our products to build strong and environmentally friendly structures....
Build with Strength, a coalition of the National Ready Mixed Concrete Association, consists of community organizations, fire safety professionals, engineers, architects, and industry experts committed to strengthening the nation’s building codes and ensuring greater access to secure housing....
Northern Facades Ltd, a division of the Flynn Group of Companies, is a leading fabricator of architectural metal panel, Laminam ceramic panel, and unitized glazing systems. Our expertise consists of design assistance, engineering, custom systems design, drafting, manufacturing, testing, value engineering, and project management. We work with the building envelope community to deliver designed, code-compliant fabricated systems to building owners, who can enjoy beautiful facades that last for many generations....
Sto Corp., headquartered in Atlanta Georgia, is an innovative world leader and producer of a broad range of versatile cladding and coating systems for building construction, maintenance and restoration. Sto Corp. has achieved ISO 14001:2004 (Environmental Management) as well as ISO 9001:2008 certification at all of our North American locations, which are located strategically across North America to serve our more than 200 distributorships in the U.S. and Canada....
Displaying 191 - 215 of 343 results.
FIRST PREV [141-165] [166-190] [191-215] [216-240] [241-265] NEXT LAST