An overview of Acoustics and Noise Control principals and design methodology. A special emphasis is placed on looking at common building types where acoustics and noise control are often required....
This course examines the material composition, reinforcement types, and testing standards associated with styrene-butadiene-styrene (SBS) modified bitumen membranes. It explains how fiberglass, polyester, and combination reinforcements affect membrane strength, flexibility, and dimensional stability. The standards that establish testing methods for tensile strength, elongation, and long-term performance are covered in detail. The course also outlines how material selection and installation practices influence roof durability, moisture resistance, and occupant safety....
Waterproofing problem solving using PMMA CFA (Cold Fluid Applied) Roofing and Waterproofing Membrane Systems....
Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®)....
This course provides an introduction to code compliance requirements for low-slope roofing systems as it relates to Wind Uplift, Impact Resistance, and Fire Resistance. Participants will explore the relevant provisions of the 2021 International Building Code (IBC), with emphasis on the referenced standards outlined in Chapters 15 and 16. Participants will review real-world documentation used to demonstrate compliance, enhancing their ability to specify and design roofing systems that meet regulatory standards....
A discussion on the increasing adoption of insulated roof decks in the North American, including descriptions on what insulated metal roof decks entail, comparisons of insulated metal roof decks with more traditional systems, and design considerations for insulated metal roof decks....
The materials we use have a big impact on the environment, our communities and our health. To select materials wisely, we have to know what's in them and what effects they have before, during and after their use. This course will focus on the key drivers in the market on material health and disclosure, types or reporting tools and what the differences are between them....
This presentation will focus on the overview of various waterproofing, water retention, and drainage methods that meet the standards of today’s green roof applications. Along with an overview of soil options and vegetation that it can support....
This course explores the critical aspects of fire-rated head-of-wall joint assemblies, providing design professionals with essential knowledge to enhance the safety and integrity of construction projects. Through an in-depth exploration of key concepts, participants will gain an understanding of fire-rated joint assembly components, the application of Steel Intumescent Fire Stops in diverse construction assemblies, and the standards essential for establishing UL-certified assemblies. Design considerations for specifying and detailing the protection of fire-rated perimeter joints will also be discussed....
Knowing the importance of preserving existing buildings and material, as explored in “Re-Solution Part I: A Carbon Case for Building and Material Re-use” this course will examine which strategies are best for different structures and situations. We will explore different [a host] of scenarios and case studies, with an eye towards the potential for improvement across the board. Carbon (dioxide) is a hot topic these days and will be a companion of sorts, though we will be sure to include H20 (oxygen, hydrogen, nitrogen) since all of these work interdependently in buildings, colluding as an all-too-often overlooked enemy of sustainability: moisture damage. If a building leaks, it is not sustainable. Here we will brush with a broader stroke, emphasizing the need for good design and detailing, while exploring examples of successful wall and roof assemblies. In “Re-solutions III: Facilitating Architectural Re-use and Wiser Wood in New Construction,” we will hone in on specific factors which can help hedge successes and minimize pitfalls in implementing reuse strategies....
A summary of performance characteristics of thermoplastic roofing systems and review of results from infrared case studies done on reflective roofing products. Emphasizes thermoplastic roofing as a component of sustainable high performance buildings and highlights some of the areas where they may help with LEED certification. Provides a sample calculation of cool roofing energy savings utilizing an on-line calculator....
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings....
View the Panasonic Industrial Devices, Building Materials Group Course Library
The surface coating is the first line of defense in prepainted metal, and one of the most important elements to consider as part of a metal purchase. Selecting the right coating, finish, and paint system can affect product lifespan, energy efficiency, and aesthetic appeal. This course discusses the composition of prepainted metal, its application and performance, and examines the building and environmental factors that may influence the type of paint system specified....
Focusing on Canadian construction code and construction, this spotlight highlights the versatility of BASF Canada’s WALLTITE closed-cell insulation system, providing innovative project solutions and code-compliant assemblies for exceptional design flexibility. Discover WALLTITE’s unique properties and benefits that make it the ideal choice for various construction applications....
Protected Membrane Roofing (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as the Inverted Roof Membrane Assembly or Upside Down / Inverted Roof, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This simple design change provides several advantages over conventional roof assemblies that have their waterproof membrane fully exposed at the top surface. For architects, PMR assemblies present many opportunities to create innovative, sustainable, and efficient buildings. The most significant advantage is that PMR assemblies offer superior protection against water penetration, which reduces the likelihood of leaks and extends the lifespan of the roofing system. They also offer enhanced energy efficiency, from the strategic insulation layer placed above the waterproofing membrane. This course will also show how PMR assemblies provide ample opportunities for sustainable design integration. They allow for the creation of green roofs or Blue Roof systems, which provide environmental benefits like rainwater harvesting. With its proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing option...
View the DuPont Performance Building Solutions Course Library
Good acoustic environments are important to the general well-being of all building users. This course outlines the benefits of creating them with wall and ceiling acoustic treatments. It includes many acoustic wall and ceiling treatment options and sample installations....
Interest in metal cladding is continually growing because of its sustainable features: durability, long life span, recyclability, and contribution to cool roofs. Manufacturers provide a wide range of panel profiles, materials, and colors to meet the increased demand. This course examines the performance characteristics and attributes of metal roofing and cladding, different aesthetic options, and best installation practices, as well as how they contribute to more energy-efficient buildings....
Introduce the concept of cold-liquid reinforced systems. Describe their advantages and attributes, particularly with respect to sustainability and minimal environmental impact. Illustrate their wide range of roofing, waterproofing and surfacing applications. Step by Step application methods to increase efficiencies and productivity, where and when to use these products on your own, guidelines based upon 50 years of experience for various kinds of applications, do and don't tips, helpful hints to increase productivity, how to install from mobilization, site set-up, demo, preparation of all substrate types, primer guidelines, installation of various membranes and installation of various top coats. Overview of bidding procedures and guidelines to better help specifiers, contractors, owners, general construction managers estimate more accurately. Provide a hands-on demonstration using a 2 component urethane liquid resin with fabric reinforcement to show application of the membrane field, flashings, pipe penetrations and drains. Demonstrate surfacing application for use over membrane....
Join us for our webinar series with a focus on Industrial and Manufacturing projects. Kalwall’s museum-quality daylighting™ provides balanced, full-spectrum light for assembly or inspection areas that require high visual acuity while providing visual privacy from the outside to protect proprietary technologies. Looking to boost worker performance, reduce absenteeism, lower maintenance requirements or capture energy savings? Learn how Kalwall can help you accomplish all that and more....
White roofs made of PVC (vinyl) can reflect three-quarters or more of the sun's rays and emit 70% or more of the solar radiation absorbed by the building envelope. Despite protecting and keeping buildings cool in all climates around the world for decades, misconceptions about the energy impact of cool roofs still exist. This course uses the fundamental science behind cool roofs to address alleged issues concerning the performance of cool roof products....
Invite costumers and guests into brightly lit spaces that encourage them to stay. Whether introducing a skylight to a hotel atrium or providing a whole new dining experience with a Kalwall façade, skyroof®, or canopy, we can help you discover a daylighting solution that keeps customers coming back....
A general overview of SOPREMA and our products and application methods. SOPREMA offers a comprehensive line of commercial roofing, waterproofing, wall protection, and civil engineering solutions combining superior products and systems with decades of proven performance. Our solutions include industry-leading SBS-modified bitumen membranes, polymeric PMMA/PMA liquid-applied membranes, and synthetic single-ply PVC membranes. For applications as diverse as roofing, below-grade waterproofing, plaza deck and balcony waterproofing, air and vapor barriers, and bridge and parking structures, SOPREMA has the solution. SOPREMA’s relentless pursuit of technological advancement, sustainability, and product quality has been known and respected around the world for over 100 years....
his course provides a comprehensive exploration of building general commercial structures using Insulated Concrete Forms (ICFs). Participants will gain valuable insights into how ICFs enhance the design and construction process, delivering superior efficiency, durability, and sustainability. The program also examines how these innovative construction methods benefit building occupants and owners through improved energy performance, comfort, and long-term cost savings....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
Rooftop HVAC equipment, waste receptacles, and other necessary but unsightly equipment are common in today’s commercial industries. Rooftop and ground screening can provide a solution for meeting code requirements while improving building aesthetics. In addition, screens may improve a property’s safety and security and establish privacy boundaries. This course offers an in-depth discussion of rooftop and ground screening, the various ways to screen, and considerations when selecting a screen. Different installation techniques and comparative characteristics of traditional screening methods versus unit-attached and modular screening methods are also discussed....
View the CityScapes Architectural Innovations Course Library
Displaying 197 - 221 of 526 results.
FIRST PREV [147-171] [172-196] [197-221] [222-246] [247-271] NEXT LAST