As energy codes continue to push building envelopes to higher R-value performance, architects and designers are challenged with also managing the moisture flow within the envelope to minimize the risk of condensation and the potential for mold and corrosion. Advanced testing and analysis demonstrate how specifiers can utilize mineral wool as an ext...
This course covers two widely used acoustic metrics, the STC and IIC ratings. Although these ratings are required by building codes and frequently used, they are still often poorly understood and there are many myths and misconceptions around their use. This course looks “under the hood” of the STC and IIC ratings to get a better understanding ...
This presentation focuses on wind design requirements for commercial low-slope roofing. The presentation covers building code history, ASCE 7, future tornado wind design requirements and agency approvals for wind uplift resistance for low-slope roofing....
Code-mandated requirements for inspections first appeared in the Uniform Building Code in 1927, and their original intent is still recognizable in our current codes: inspections by a building official are required at specific points in the construction process. In this course, we will examine an alternative to the periodic inspection process, the f...
View the AEC Daily Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This presentation will cover what civil engineers need to know when utilizing segmental retaining walls for grade separation in their site development plans. The presentation will introduce participants to the National Concrete Masonry Association’s Best Practices Guide for Segmental Retaining Walls focusing on recommendations relevant to Civil E...
Reducing noise between occupied spaces isn’t just needed for occupant comfort and productivity, it is sometimes required by building code. This presentation is an overview of noise control principals, construction composites, and design methodology for ceilings, floors, and partitions. A special emphasis is placed on performance-oriented design...
Retrofitting and replacing roof systems are essential aspects of the construction industry and offer opportunities to reduce a building’s energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting ecofriendly building practices. This course gives an over...
It is imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based ...
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-eng...
View the Pacific Stair Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
It’s imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based...
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Falls are responsible for more open wounds, fractures, and brain injuries than any other cause of injury. Photoluminescent (PL) exit path markers have proven to provide safe and quick egress in all light conditions for occupants and fail-safe guidance to first responders entering unfamiliar surroundings in the event of an emergency. This course dis...
View the Ecoglo Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course provides an overview of cable assemblies used as infill on residential and commercial railings. The course will explain the uses and advantages of building with stainless steel cable railing assemblies; identify and evaluate important railing frame design requirements, considerations, and options; discuss safety and code related issues,...
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditiona...
This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®). ...
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as...
According to the IBC, “…Construction documents shall be of sufficient clarity to indicate the location, nature and extent of the work proposed and show in detail that it will conform to the provisions of this code…as determined by the building official.” Failure to properly to do so can jeopardize life safety and property and result in seri...
NFPA 285 is defined as: the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA 285 assembly tests are required when exterior non-combustible walls contain combustible components per the International Building Code (IBC). The scope of mater...
View the DuPont Performance Building Solutions Course Library
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In t...
This course explores design choices to meet energy code and thermal insulation selection strategies to maximize long term building performance. Factors influencing the performance of an insulation in its application include production, R-values, moisture, temperature, aging, and quality of installation will be discussed....
View the DuPont Performance Building Solutions Course Library
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multistory residential, commercial, and multipurpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with ...
View the Proflex Products Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This is a Product SpotLight Presentation. Experience Formawall: The ultimate exterior wall system for healthier, long-lasting, high performance building enclosures. Simplify construction, enhanced thermal efficiency with integrated components to elevate performance and aesthetics with CENTRIA Formawall....
Newer energy codes require that homes be sealed and tested to 3-5 air changes per hour. Good home design and the right spec’s go along way to making that happen. Proper air sealing saves energy and reduces moisture and mold problems. In this advanced session 1 hour session building science expert Steve Easley uses pictures from the real world exa...
View the DuPont Performance Building Solutions Course Library
Wind forces always influence building design and detailing. This course focuses on one particular force, wind uplift, and its influence on roof paving system design and selection. It examines how wind loads and building configuration affect the design of roof paving systems; the codes, regulations, and calculation approaches that inform and control...
The facade is one of the most significant contributors to the energy consumption and comfort parameters of any building. This course explores high-performance building envelopes and the use of advanced insulated metal panel systems featuring integrated daylighting and ventilation components that combine to provide weathertightness and maximum therm...
Retrofitting and replacing roofing systems are essential aspects of the construction industry and offer opportunities to reduce a building's energy consumption. Sustainable retrofitting of roofs with durable, energy-efficient materials helps reduce waste and conserve resources while promoting eco-friendly building practices. This course gives an ov...