Mitigating thermal bridges in building envelopes is a major new thrust for improving the thermal performance of buildings. This presentation explains the types of thermal bridges, their impacts, how to account for them, and practical ways to address them with efficient detailing and insulation strategies, including continuous insulation....
View the DuPont Performance Building Solutions Course Library
A depiction and analysis of unusual and problematic detailing conditions from specific projects that go beyond use of a manufacturer's standard details for common conditions. This shows how fluid-applied flashing and detailing products rather than peel & stick membranes can be successfully used to handle particularly challenging conditions and how ...
This course explores design choices to meet energy code and thermal insulation selection strategies to maximize long term building performance. Factors influencing the performance of an insulation in its application include production, R-values, moisture, temperature, aging, and quality of installation will be discussed....
View the DuPont Performance Building Solutions Course Library
Understanding how insulated metal panels comply with fire safety regulations under the code are critical to their proper use in creating highly energy efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety related aspects to allow building designers to make an informed decisi...
Helps provide the design community with a better understanding of the model energy code requirements for insulation in metal buildings, how codes are changing, including requirements for continuous insulation and air barriers along with considerations when selecting the right insulation....
View the DuPont Performance Building Solutions Course Library
Sustainability in building construction is important to the architect, the builder, and owner. This presentation will focus on the sustainable benefits of using masonry on the building's envelope, and how it can contribute to LEED certification with the new LEED v5 rating system....
A rainscreen cladding is one of the most efficient systems for construction envelope purposes in today’s commercial building environment. This presentation will discuss how a rainscreen cladding provides a building solution that perfectly fits into the current sustainable architecture trends; whose installation is easier than it seems....
Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems fo...
This course goes over sustainable roofing considerations. Participants will understand what role the roof system plays in sustainable design, and how conventional roof design impacts sustainability. They will also learn the how insulation type impacts lifecycle, and how to improve design with the ‘Perfect Roof.’ Presentation covers critical con...
View the DuPont Performance Building Solutions Course Library
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also ...
View the Florida Concrete & Products Association, Inc. Course Library
This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, participants will learn how effective air sealing will improve overall occupant comfort, health, and safety. This includes a detailed look at sources of air le...
This course provides an overview of impacts from natural disasters and identifies solutions for building back better. It discusses the use of closed-cell polyurethane foams as well as other performance materials for disaster durable construction applications, including responding to flood and wind events using approved methods and materials....
This course will investigate the history of exterior stucco to the most recent developments in stucco assemblies designed with innovative weather resistive air barrier membranes in a ventilated rainscreen wall assembly. Participants will identify drainage and venting requirements and understand the details of stucco wall systems. The course will ex...
Recent changes in North America energy codes for the building envelope include higher insulation R-values, continuous insulation, and continuous air barriers for air leakage control. New, code compliant wall assembly design options may be susceptible to increased moisture sensitivity due to lower drying rates, which are inherent to energy efficient...
View the DuPont Performance Building Solutions Course Library
This presentation explores the principles and applications of helical masonry beaming, a reinforcement method that improves the stability and safety of masonry structures. It begins with an overview of common causes of masonry failures, such as bulging walls, cracking, and excessive moisture infiltration, while also summarizing common post-installe...
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examine...
View the Morin Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This program is designed to educate the audience on the processing of closed cell spray foam, its use in the commercial building envelope. It will also go into the proper application and safety required in using closed cell 2# spray foam. There will be some building science and discussion of air barriers. The program ends with discovering many othe...
The materials we use have a big impact on the environment, our communities and our health. To select materials wisely, we have to know what's in them and what effects they have before, during and after their use. This course will focus on the key drivers in the market on material health and disclosure, types or reporting tools and what the differen...
Steel transfers heat amazingly fast – up to 300 times faster than wood studs and reduces the effective R-value of metal stud wall designs by 40–60%. The ASHRAE prescriptive continuous insulation requirements for steel-framed, above-grade walls recognize this phenomenon, and in most climate zones, call for a layer of continuous insulation (ci) t...
View the DuPont Performance Building Solutions Course Library
Slate has been used for centuries as a long-lasting building material, and its natural beauty is unsurpassed. Today, rainscreen cladding systems have been developed to adapt natural slate to new architectural demands for sustainable building design approaches. This course explores the energy efficiency and moisture management benefits of a rainscre...
This presentation will focus on the overview of various waterproofing, water retention, and drainage methods that meet the standards of today’s green roof applications. Along with an overview of soil options and vegetation that it can support....
The impacts of noise on occupancy health and wellness must be taken seriously. By understanding the importance of good noise control, learners will be able to understand the link between acoustic control and health, well-being, learning and productivity. This course will describe different scenarios like healthcare facilities, schools and offices. ...
This course explains the design of adhered masonry wall systems typical of today’s best practices. It utilizes familiar masonry cavity wall design to show why proper ventilation and drainage typical in this wall type must also be used in adhered masonry veneer wall design, and explores the design differences and similarities between masonry cavit...
A survey of types and causes of staining common to new masonry construction, with recommendations and guidelines for cleaning and product selection....
The selection of a wall system for a building envelope involves several key considerations. In this course, we evaluate the characteristics of pre-cast concrete, tilt-up concrete panels, insulated concrete forms, lightweight metal frame, pre-insulated masonry, and conventional masonry. We compare the performance of these wall systems on these consi...
Displaying 200 - 224 of 321 results.
FIRST PREV [150-174] [175-199] [200-224] [225-249] [250-274] NEXT LAST