Green facades can contribute to building energy efficiency, durability, aesthetic value, sustainability, and cost effectiveness in the performance of ecological system services. This course examines the considerations required for successful green facade installations and includes discussions on system selection, design, plant selection, maintenance, and client/owner education....
The 2024 International Energy Conservation Code (IECC) fundamentally shifts how the thermal performance of building enclosures is designed and evaluated. In the 2024 IECC Chapter 4 Commercial Energy Efficiency, compliance now requires design teams to account for linear and point thermal bridging, as does ASHRAE 90.1-2022, which is incorporated by reference. This impact will notably change how design professionals consider typical building details like parapets, cladding attachments through continuous insulation, window perimeters, and more. Through a side-by-side review of previous and current requirements, this course will bolster design professionals’ understanding of the steps needed to address thermal bridges and how to incorporate these results in prescriptive path, performance path, and COMcheck compliance calculations. By examining the updated air leakage testing requirements codified in the 2024 IECC, professionals will learn to decipher whether whole-building air leakage is mandatory or if the air barrier design and verification approach will apply to their project. This course will explore the practical impacts of the new energy code requirements, reveal strategies for meeting compliance, and share tools that can help design professionals stay ahead in a rapidly changing energy code landscape. This course welcomes both new and experienced design professionals alike. Those with a basic understanding of building enclosure-related heat transfer and fundamental calculation methods will benefit most from this course....
Discover the science of wind uplift; how it is changing. Learn how the changes are impacting codes and roof material choices. Learn about testing and specification techniques for metal roof options and accessories to improve wind uplift resistance providing a safer building at a lower cost....
Insulated Metal Panels (IMPs) are lightweight composite exterior wall and roof panels with metal skins and an insulating foam core. These panels have superior insulating properties, and their outstanding spanning capabilities and one-pass installation make them quick to install, saving costs compared to other wall assemblies. IMPs are available in a wide variety of colors, widths, profiles and finishes, enabling any aesthetic desired for walls and roofs. This session will be an excellent opportunity for contractors, engineers, and other members of the metal construction world to learn more about these products gaining a growing market share....
Green or vegetative roof systems have become an effective means to address aesthetic and environmental issues and provide energy savings for building owners, while at the same time providing protection for a building and its contents through the use of a high-performance waterproofing system. This program describes the basics of vegetative roof systems and outlines some cost and construction considerations for designers....
The building envelope is the physical separator between the conditioned and unconditioned environment of a building and provides resistance to air, water, heat, light, and noise transfer. As a thermal barrier, spray polyurethane foam (SPF) offers numerous opportunities to contribute to building envelope performance and indoor air quality in several project types. This course presents the sustainable aspects of SPF, SPF fire and strength testing, and the benefits of SPF in below- and above-grade and rooftop applications....
The course is designed to teach attendees the differences between the insulation used in insulated vinyl siding. Comprehend the features and benefits of using insulated vinyl siding. Identify performance features when comparing the two types of insulated vinyl siding. Understand what type of material is used to manufacture insulated vinyl siding. Recognize the two most common types of insulation used during the insulated vinyl siding manufacturing process....
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques....
Provides an overview of the performance characteristics and benefits of using multi-layer, cellular PVC decking—a durable decking material that replicates the unique beauty of exotic hardwood....
Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical....
The E107 Designing with Single Skin Metal Wall Panels program familiarizes the audience with metal wall panel design options. We will discuss the things to take into consideration to ensure a safe and aesthetically pleasing project by utilizing metal wall panels to meet the intended design. We will educate the proper way to design the wall panel assembly to make sure water is properly drained so it will not cause future concerns....
This course reviews the definition of sustainability, and how Environmental Product Declarations (EPDs) and Health Product Declarations (HPDs) are being used to address product transparency needs. We will review how IMPs provide all environmental control layers and how their use contributes to sustainable design. LCAs form the backbone of EPDs, and this course walks through the creation of EPDs as well as the environmental factors evaluated. HPDs are the latest tool used to study building product toxicity, and we will provide a complete review of how these important documents are prepared and used by owners, architects, designers and manufacturers. We finish up by studying how EPDs and HPDs are used in environmental rating systems such as LEED, Green Globes and Living Building Challenge....
Low permeance vapor barriers, once thought to improve performance, may in fact increase interior condensation and trap moisture within the wall assembly. Due to the problems with impermeable water-resistive barrier (WRB) installation many architects are now incorporating highly vapor open WRB systems in their designs. But many still believe too much permeability is bad for a wall assembly. Studies show that highly permeable WRB systems increase substrate drying, reduce the wet time of absorptive claddings allowing permeable WRB membranes to enhance the wall assembly performance. This presentation investigates the current research on vapor open systems and discusses how more permeability enhances wall assembly performance....
This course explores how an innovative, scalable, and economical cold-formed steel column and composite beam framing system addresses common primary framing challenges to reach the roof faster and deliver stronger, more cost-effective, and sustainable projects. This well-proven, ICC-compliant system reduces dependencies on multiple trades and minimizes the number of handoffs, supporting schedule compression, which then translates directly into earlier openings, faster revenue generation, and reduced labor costs. The system is applicable to a range of housing, hotel, and commercial mid-rise projects in all climates and geographies....
This course focused on the design considerations of Data Centers and incorporation of insulated metal panels to achieve superior building performance. Topics include supporting structure design including allowable spans, environmental control layers (air, water vapor, and thermal) code requirements, and fire safety building regulations. How insulated metal panels (IMPs) are used in the HVAC design and function as a "Perfect/Universal" wall system throughout the building....
This course provides an overview of impacts from natural disasters and identifies solutions for building back better. It discusses the use of closed-cell polyurethane foams as well as other performance materials for disaster durable construction applications, including responding to flood and wind events using approved methods and materials....
An educational session exploring innovative floor coating systems, their applications, and how they contribute to sustainability and durability in modern architecture. Attendees will learn about advancements in materials, the importance of proper installation methods, and the role of floor coatings in enhancing the functionality of commercial and residential spaces....
Confused about the various types of lath available? Want to know the advantages of each and how they contribute to resilient, energy-efficient wall systems? What are the ASTM standards that each lath type is required to meet? What are some of the challenges of lath and plaster, and how are they mitigated? This course will answer these questions and review best practices and solutions....
This course is focused on the essential aspects of below-grade waterproofing. It offers a comprehensive overview of the most prevalent technologies and innovative solutions designed for these critical applications. We'll uncover the common causes of membrane failures and share proven risk mitigation strategies to ensure the longevity and integrity of your projects. Enhance your expertise and learn best practices that can significantly impact your next project....
Join us for our webinar series with a focus on Sports + Recreation projects. There are many reasons that Kalwall is such a natural fit for coaches, athletes, trainers and fans alike. Providing glare-free, full-spectrum light is ideal for videography, mental focus and visual acuity. Learn more about how Kalwall can help you build a facility fit for champions....
This course discusses the unique considerations when installing pre-applied/blindside waterproofing for below grade waterproofing applications. It reviews the science behind any below grade waterproofing project but with a focus on pre-applied or “blindside” waterproofing best practices – including looking at the different product types and design considerations, as well as the pre-planning, decision making, and application techniques that these demanding waterproofing projects require....
This course is a targeted course of instruction and professional development for engineering firms engaged in the design of chemical, industrial, and environmental projects such as secondary containment of hazardous waste, industrial wastewater, ozone contactors, and others. The course is technical in nature and describes the role of waterstops in fluid-proofing concrete joints, chemical resistant polymers and steels, and state and federal regulations of compliance....
The materials we use have a significant impact on the environment, our communities, and our health. Consequently, material transparency—wherein manufacturers disclose vital sustainability information about their products—is an increasingly necessary element of modern life. This course examines the tools and resources that are available for both manufacturers and the A&D community that effectively communicate transparency information and optimization of building products. Also reviewed are the benefits of the new-generation insulated metal panels (IMPs) designed to achieve a trusted range of health and wellness certifications....
This course aims to educate learners about the chemistry of spray-applied polyurethane foam (SPF), its various applications in the construction industry, safe handling and installation, and its contribution to sustainable design. The advantages of using SPF are highlighted in terms of its benefits to energy conservation and fire safety. Its role as a high-performance air barrier that satisfies code and LEED® criteria and complies with various standards is also discussed....
Designing to accommodate thermal movement is just one of the many critical details for the long-term success of a metal roof installation. This course covers the design and specification considerations and architectural details that impact project requirements, as well as the components and the energy-efficient features of metal roofing assemblies....
Displaying 231 - 255 of 536 results.
FIRST PREV [181-205] [206-230] [231-255] [256-280] [281-305] NEXT LAST