With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method....
View the North American Modern Building Alliance Course Library
When considering the building enclosure, fire safety is an important design factor and needs to be considered hand-in-hand with energy code requirements. The NFPA 285 “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components” is a critical consideration with modern building assemblies incorporating combustible materials in non-combustible construction. This presentation will review the history and scope of the NFPA 285 test standard, and its adoption within the International Building Code (IBC). It will outline the criteria for compliance, as well as identify triggers and contributors under the standard. The presentation will review how the selection building components such as insulation, air/water resistive barriers and claddings, can affect the fire performance of an assembly, and identify solutions and common paths for compliance....
View the DuPont Performance Building Solutions Course Library
Expansion or modification of electrical cabling is rarely considered yet occurs during the lifetime of most buildings. Expansion of in-wall cabling requires additional work, trades, and possibly electrical service interruption, but cable tray facilitates removal and addition of cabling. This course reviews two types of cable tray—ladder tray and wire mesh tray—their components, characteristics, and applications and code-related installation information....
View the Legrand Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Stairs are an essential component of a movement and wayfinding strategy in a structure and a primary means of egress, exit, and floor-to-floor access in the event of a fire or emergency for buildings with multiple floors or a change in rise. This course discusses stair and egress system design and evaluates why the design and fabrication of pre-engineered steel stairs create safe stair environments that comply with building codes....
Ensuring compliance with increasingly stringent energy codes is a leading architectural challenge. This course explores the latest edition of the International Energy Conservation Code (IECC) with a focus on the building envelope and how to achieve – and exceed – energy performance requirements when building with masonry....
This presentation explores exterior wall design performance; energy code requirements; influences of air, moisture, thermal, and vapor barriers; and actual project case studies are presented. This program will be an interactive session that encourages feedback and questions....
Residential building envelope assemblies need to deliver a wide range of benefits – from reducing energy waste to maintaining occupant comfort to providing critical shelter during severe weather events. Each component of the envelope has an important role to play, including the insulation. This presentation introduces the key benefits and attributes of polyiso continuous insulation products used as part of residential envelope assemblies. This includes serving as the insulation layer in steep slope roofs, above grade walls, and below grade foundation assemblies. Topics include designing building and energy code-compliant residential envelope assemblies, solving performance challenges like reducing thermal-bridging and managing the threat of moisture intrusion, as well as reducing the environmental impacts of buildings with assemblies that contain polyiso continuous insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Restrooms and other plumbing applications must comply with accessibility regulations, but do you know exactly how to do that? This course is a handy reference that explains what codes and regulations you must satisfy, when those requirements apply to new construction and alterations, and how to select and install fixtures to meet accessibility standards and the requirements of the LEED® v5 for Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
Zurn | Elkay | Hadrian | World Dryer | Wilkins
This course is part of one or more "Course Collections". Click here to view the details.
This presentation includes information on continuous insulation performance and specific detail on polyisocyanurate insulation, an overview of the history of foam plastic insulation in the building codes, and a detailed review of the 2021 International Building Code’s fire safety requirements for the use of polyisocyanurate insulation in exterior walls of commercial buildings (Construction Types I-IV), including the NFPA 285 fire test standard....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
When designing the building enclosure from the substrate to the cladding, architects and designers face a host of challenges, from energy code and NFPA 285 fire testing compliance, to ensuring aesthetically pleasing façade design. This course, featuring a panel of four different industry experts, explains design trade-off complexities and strategies to maximize flexibility while maintaining code compliance—and ultimately build a dependable, robust building façade. First, experts will review the challenges of choosing and placing an air and weather barrier. Secondly, codes and thermal bridging will be analyzed to determine insulation and thermal spacer selection. Finally, we will explore critical challenges associated with continuous insulation and the requirements of a rainscreen cladding system....
Exterior wall systems are the dividing line between the exterior and the interior and must address several fundamental performance goals of the building envelope. This course reviews traditional rainscreen design and examines why, with its single-component construction, an insulated composite backup wall system is a vast improvement over traditional multicomponent building technology....
Increased energy efficiency in both new and existing construction continues to be a large factor behind the design decisions we make and the materials we choose to integrate into our buildings. Concrete masonry construction can provide a wide range of benefits. This course illustrates how building envelopes constructed with concrete masonry create high-performance buildings that can exceed energy code requirements....
View the Concrete Masonry & Hardscapes Association (CMHA) Course Library
Presented by a subject matter expert on behalf of CENTRIA, a Nucor company. As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly....
Building fires claim nearly 4,000 lives each year in the U.S. It is the responsibility of building designers to do their utmost to prevent such fires and their accompanying loss of life. Often, the difference between life and death is as simple as a fire door that functions properly. This course focuses on describing how design professionals can reinforce their ability to ensure that fire doors are specified, installed, inspected, and maintained properly and that they meet or exceed all relevant code requirements....
This course is part of one or more "Course Collections". Click here to view the details.
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance....
The purpose of this course is to provide an introduction to the use of entrance floor systems in commercial buildings in order to promote a safe and clean environment. The course explains the codes, regulations, and guidelines specifically related to entrance flooring systems for high-traffic entrances in healthcare, education, transportation, corporate, and other commercial settings....
View the Construction Specialties Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course is aimed to define what exactly continuous insulation is, and the key benefits of using it. The course will also show participants how continuous insulation complies with building and energy code requirements within that field....
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation....
In today’s high performance building market, specifying materials that work together as a complete wall system is more critical than ever. Systems can help designers meet new energy codes, reduce costs and improve building function and sustainability while making the design process faster and simpler. This course will educate participants on the functional components and system attributes of the most common exterior wall system, steel stud with masonry veneer. The course will detail key system components such as continuous and stud cavity insulation, air/water resistive barriers, air sealing practices, masonry wall ties and water drainage/management practices. Key codes and standards will be reviewed to define system interaction and key specification practices to ensure wall system designs are consistent with recent advances in building analysis, new code requirements, revised test methods, and a comprehensive, systems approach to wall systems....
This presentation provides a comprehensive examination of the risks inherent in mid-rise construction and their direct impact on long-term building performance, safety, and occupant welfare. Participants will explore the shortcomings in current building codes that may allow for vulnerabilities and damages in these structures. The session will also address how natural movements within wood frame assemblies can compromise the integrity of the building envelope, creating pathways for moisture intrusion, structural stress, and premature material failure. In addition, the course will highlight the challenges of material compatibility at critical construction junctures—including parapets, balconies, roof-to-wall intersections, and transitions between dissimilar claddings—where failures frequently occur. Finally, attendees will gain insight into the external industry pressures, such as reduced budgets, accelerated schedules, and shifting market trends, that often undermine construction quality and limit the implementation of best practices. Through this exploration, architects, engineers, and construction professionals will gain strategies to recognize risk factors, improve design and detailing, and safeguard the health, safety, and welfare of building occupants."...
View the Florida Concrete & Products Association, Inc. Course Library
Join us for our webinar series with a focus on retrofit projects. The design challenges facing architects and builders when renovating older buildings are considerable, from increasing energy efficiency to navigating inherited structural and building code changes. Kalwall is a lightweight, rapidly installed and beautiful solution for bringing old buildings into the modern, daylit, era. Learn more about how Kalwall can help you accomplish a retrofit on budget and on schedule....
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online....
Insulating concrete form (ICF) products use a cost-effective and robust structural material option (reinforced concrete) to turn a building envelope into a high-performing thermal, moisture, and air enclosure with disaster resistance and built-in compliance with energy code requirements. As a result of ICF performance, building owners can complete a whole structure with ICFs and reinforced concrete, including intermediate suspended floors, rooftops, and multistory designs. This course examines the advancements in ICF technology and discusses the potential contribution of ICFs to supporting improved sustainability and resilience....
Security entrance control is essential to manage the flow of visitor and authorized user traffic through secured or restricted areas. A wide range of products with multiple types of technologies are available, and a host of buzz words describing their operation abound in this industry. Join us as we journey through the range of products, their operation, the level of security they provide, and both building code and ADA compliance. Security entrance control enhances the safety and peace-of-mind for of employees, residents, passengers, customers, visitors, etc. by providing automatic security screening of those who try to enter and exit the secured space. This secured space may be a campus, an entire building, or designated area within the building. Security entrance control occurs at office and residential buildings, healthcare facilities, entertainment complexes, transportation facilities, campuses, shopping locations, and anywhere that people enter and exit. The security entrance combined with credentialing equipment and software that limits use to only authorized personnel, make for a seamless passage into a secure area. Not only do security entrances control access and/or egress, they provide a visual presence that serves as a deterrent. SECURITY IS A MUST IN TODAY’S WORLD....
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection....
View the DuPont Performance Building Solutions Course Library
