Rooftop HVAC equipment, waste receptacles, and other necessary but unsightly equipment are common in today’s commercial industries. Rooftop and ground screening can provide a solution for meeting code requirements while improving building aesthetics. In addition, screens may improve a property’s safety and security and establish privacy boundaries. This course offers an in-depth discussion of rooftop and ground screening, the various ways to screen, and considerations when selecting a screen. Different installation techniques and comparative characteristics of traditional screening methods versus unit-attached and modular screening methods are also discussed....
View the CityScapes Architectural Innovations Course Library
This course features a broad discussion on Vegetated Roof Systems, including their history, the variety of types, and the various components that comprise these systems, as well as their numerous benefits....
There are 3 modes of heat transfer: conductive, convective, & radiant. Radiant Heat Gain (RHG) accounts for significant increases in energy use and impacts building occupant comfort. The use of Radiant Heat Barriers in specific project types can reduce RHG by up to 80% or more improving building performance in both categories. This presentation will provide insight into the science and the solutions....
High-quality architectural stone veneer is a lower-cost, easier to install, sustainable alternative to natural stone. Though traditionally more often used in exterior applications, stone veneer is making its way into more interior applications across a wide variety of industries. This course will review performance and aesthetic characteristics of stone veneer and how it’s used in different applications. Learners will also explore how stone veneer contributes to biophilic design principles and helps architects specify for changing residential building trends....
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important....
Undesirable acoustics in educational spaces have long been considered averse to our goals to effectively teach, create, collaborate, listen, and learn. The impact on students’ academic achievement, social adaptation and mental health can be vast and long lasting. In this class we will examine impact of different sound problems and how introduce solutions to mitigate them. Learn about solutions that create synergy between the architecture and the classroom environment to optimize student learning, student recruitment, and teacher retention....
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
High rise fires are not new to us. In fact, we have seen an increase in fire incidents in Asia, Europe, and the Middle East in the last 5-10 years that have amplified awareness on fire safety performance of taller structures. High rise buildings present a greater risk with an increased number of occupants that have a limited means of escape in the event of a fire. That is why the time element for containing a fire is so critical. Also, as we have seen in actual fires, vertical fire spread at the exterior façade can rapidly overwhelm fire fighters means of interceding the fire from ground level. As the fire accelerates and upward spread progresses, it often reaches a height beyond the reach of fire services water streams. That is why containing a fire and preventing if from spreading vertically is so critical for both occupant and first responder safety....
Penetrations of the WRB are unavoidable, but it is critical to ensure that they remain watertight. The recommendations for sealing these penetrations are often based on unrelated test methods such as those for nail penetrations in roofing membranes or on anecdotal evidence. This course will cover a data driven test plan which was used to was used to determine which type of flashing and sealing solution is best to ensure water tightness after cladding attachments are installed over polyisocyanurate insulating sheathing. Additionally, information on how other single-layer insulating sheathing systems allow for water tightness of the assembly after cladding attachment will be discussed....
View the DuPont Performance Building Solutions Course Library
Not only is standing seam metal roofing (SSMR) robust and durable, but the seam itself also provides a convenient anchorage point for the mounting of rooftop equipment. This course reviews the features and advantages of SSMR in terms of durability and sustainability, and the appropriate attachment solutions for mounting equipment. The course focuses on nonpenetrating roof seam clamps and design considerations for their use with snow retention and solar panel systems....
This course explores the role of motorized pergolas in shaping contemporary outdoor spaces that balance energy efficiency, occupant comfort, and architectural design. Participants will learn how these systems support sustainable performance goals, discover key considerations for successful integration, and review best practices for specifying louvered roof solutions in both residential and commercial projects....
Building science experts acknowledge the need for drainage in both vertical and horizontal applications in order to eliminate moisture issues and extend the life of the building. This course examines foundation wall, green roof, and plaza deck applications and discusses the factors that impact drainage, including soil permeability, saturation, land cover, and loading. Flow rate standards are discussed, and drainage composite mat installation is explained....
This presentation discusses the overall importance for below grade waterproofing systems as well as the other various types of systems. The Presentation also explores modes of failure and the negative impact of moisture infiltration into a structure....
This course is a targeted course of instruction and professional development for engineering firms engaged in the design of chemical, industrial, and environmental projects such as secondary containment of hazardous waste, industrial wastewater, ozone contactors, and others. The course is technical in nature and describes the role of waterstops in fluid-proofing concrete joints, chemical resistant polymers and steels, and state and federal regulations of compliance....
Today’s buildings continue to push the envelope of architectural design, energy efficiency, construction timelines and cost reductions forcing building materials and application techniques to evolve. The evolution of products and applications to waterproof the entire building envelope (vertical and horizontal) throughout various construction materials has created a blend between established and newly developed waterproofing technologies. These blended technologies have the single purpose of integrating and creating a continuous system protecting the building from moisture and performing harmoniously. This presentation helps identify the challenges and opportunities to build an integrated waterproofing system addressing all six sides of the building envelope. While each type of installation will be reviewed separately, the platform will be set for successful integration at all of the transitions and changes within the building by the proper identification and specification of compatible products and materials....
Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. Choosing the right insulation and putting it in the right location is becoming one of the most important decisions in design, construction, and retrofit. Reviewed in this course are the features, benefits, and design and installation considerations related to mineral wool continuous insulation....
Stormwater management is critical in an era when severe storms and sewer overflows are increasing in many areas. In urban contexts where open space is at a premium, using on-structure bioretention planters can be the ideal approach. This course explores the benefits of bioretention and how bioretention planters reduce peak flows and improve water quality. The course also discusses how bioretention planters should be designed, can perform as amenities, and contribute to meeting the requirements of green building certification programs....
This course covers the basics of cellular PVC for moulding and trim. It shows the learner the anatomy of window surrounds made of cellular PVC, how to install and maintain the material, and finally architectural moulding and trim mistakes to avoid....
Today's complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided....
View the Isolatek International, Inc. Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings....
View the Panasonic Industrial Devices, Building Materials Group Course Library
Wall system applications are becoming more and more common in the building envelope industry today. Explore the science behind wall systems and the tangible benefits of incorporating this technology into building structures. There is an emphasis on the differences between air barriers and vapor barriers and which is the best given climate and wall assembly....
As interest in cross laminated timber buildings grows, the market for building enclosure products, as a whole, has yet to fully provide the water-resistant barriers, vapor barriers, and air barriers to optimally support the unique characteristics of wood. Furthermore, there are few building enclosure design guides specific to detailing wood-framed walls, floors and roofs. This comprehensive course fills the gap, providing detailed information on mass timber, building enclosure issues, the vapor-permeable technology available to address wood’s unique moisture characteristics, and a how-to guide on detailing the walls, floors and roof of the enclosure....
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and discusses the many industrial and architectural products available to control noise in virtually any environment....
Reducing noise between occupied spaces isn’t just needed for occupant comfort and productivity, it is sometimes required by building code. This presentation is an overview of noise control principals, construction composites, and design methodology for ceilings, floors, and partitions. A special emphasis is placed on performance-oriented designs requiring third party consultants....
The construction industry has experienced a significant increase in moisture-related problems in exterior walls. This presentation explains how a rainscreen wall system prevents moisture accumulation within walls by providing a means for drainage and ventilation, thereby prolonging the life of buildings. Discussion topics include air and moisture movement in the building envelope, building code and water-resistive barriers, and stucco and thin veneers in rainscreen systems....
Displaying 267 - 291 of 524 results.
FIRST PREV [217-241] [242-266] [267-291] [292-316] [317-341] NEXT LAST