Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality....
This is a condensed version of the 2-hour course ECH-BIM-1901: Masonry Solutions for BIM. Masonry construction presents a myriad of challenges for specifiers – especially those who are less familiar with masonry construction methods, performance standards and assembly detailing. A new wave of BIM modeling tools seeks to bridge the gap between these challenges and the extensive benefits of masonry construction, including resiliency, energy performance and unique aesthetics. This presentation provides a condensed overview of BIM and its impact on the construction industry, with a particular focus on new software tools that are changing the way masonry is designed, specified, ordered, manufactured, shipped, installed and maintained. Additionally, this course will delve into masonry building codes – with a particular focus on energy codes – and how they work together with masonry materials to deliver safer, healthier and higher-performing buildings for occupants....
ICF construction is cost effective and sustainable, and is a superior way to build stronger, quieter, healthier, and more energy-efficient commercial structures. This course explores insulated concrete form (ICF) construction, describing the forms themselves and their construction, performance, and sustainable benefits. Also presented are design guidelines, the installation process, flooring systems, and commercial project applications....
Discover the characteristics, benefits and design options for commercial and industrial buildings using insulated metal panels (IMPs). Recognize the factors affecting panel spans and the relationship of these to structural supports. Gain knowledge of IMP code compliance....
It is imperative to have a dependable, well-designed fire protection system that helps save lives and property. This course is designed to advance awareness and understanding about the wide range of components, functionality, and benefits of today’s most innovative standpipe fire systems and how to select the optimal system for your design based on building type, codes, and other requirements....
View the Zurn | Elkay | Hadrian | World Dryer | Wilkins Course Library
There are a multitude of building envelope products used and a variety of methods taken for achieving energy and building code requirements. Understanding the different roles a product plays in the envelope simplifies its design. In this course, we take a look at the code requirements for buildings classified as IBC Types I–IV, paths to achieving compliance, and the number of roles polyisocyanurate insulation plays in meeting these requirements....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Fire safety is an important building enclosure design factor and needs to be addressed hand-in-hand with energy code requirements. NFPA 285 is a critical consideration with modern building assemblies incorporating combustible materials in noncombustible construction. This presentation reviews the history and scope of the NFPA 285 test standard and its adoption into the International Building Code® (IBC®). The compliance criteria are outlined, and triggers and contributors under the standard are identified. The course also reviews how the selection of building components such as insulation, air-/water-resistive barriers, and claddings affects the fire performance of an assembly, and solutions and common paths for compliance are presented....
View the DuPont Performance Building Solutions Course Library
The presentation reviews a brief history of architectural IMP’s, current trends with comparisons to other materials and explores developments which will lead to future aesthetic possibilities and performance enhancements....
Extreme weather events of all sorts are becoming increasingly frequent and ferocious. Wood stick-framed structures struggle to withstand them. As climate behavior shifts and worsens, building damage and destruction increase, building codes evolve, and insurance premiums skyrocket or simply become unavailable for certain building types in some locations. Architects must now utilize stronger, more resilient, noncombustible building approaches to address this situation. In addition, mounting pressures related to labor shortages, rising material costs, stringent building codes, and environmental volatility are pushing architects, developers, and engineers to reimagine their approaches to structural design and material selection. This course explores how an innovative, scalable, and economical cold-formed steel column and composite beam framing system can and does address these issues to create faster and deliver stronger, more cost-effective, and sustainable projects. This well-proven, code compliant system reduces dependencies on multiple trades and minimizes the number of handoffs, positively impacting schedule compression, which then translates directly into earlier openings, faster revenue generation, and reduced labor costs. The system is applicable to a range of housing, hotel, and commercial midrise projects in all climates. The course begins by exploring the limitations of traditional wood and metal framing systems. It then describes this prefabricated cold-formed steel (CFS) column and beam framing system and its details, erection methodology, advantages, environmental and sustainability benefits, accreditations, and certifications. It concludes with some representative examples of real-life projects....
The demand for mass timber construction has increased significantly in recent years due to its numerous benefits, including sustainability, strength, faster construction times, cost savings, and a natural wood aesthetic. However, a major drawback of mass timber construction is its poor acoustical performance. This course examines the various mass timber construction types and provides acoustical solutions to meet and surpass building codes....
The presentation will the concept of Consolidated Control Layer Design and how to use it to determine the materials that will make the most efficient wall for your customers. We will define the Control Layers, discuss the Code Requirements for each layer, explain the Building Science behind the code requirements, and how that layer is related to the other (Thermal to Moisture, Moisture to Air, Air to Vapor, etc.) We will then discuss the Fire considerations that Impact Control layer design with today’s codes, including NFPA 285 Brief Overview as it has changed the way we design our above grade wall systems and types of continuous insulations that influence the design considerations with respect to fire and NFPA-285. Finally, solutions for consolidating these 4 layers for simplified design, superior performance, and long-lasting durability will be covered....
View the DuPont Performance Building Solutions Course Library
Helps provide the design community with a better understanding of the model energy code requirements for insulation in metal buildings, how codes are changing, including requirements for continuous insulation and air barriers along with considerations when selecting the right insulation....
View the DuPont Performance Building Solutions Course Library
The spread of smoke in mid- and high-rise building fires is recognized as a major threat to the safety of the building occupants and responding fire personnel and the effectiveness of firefighting operations. This course explains how smoke migrates in a multi-story building fire and discusses how building codes have evolved to address this danger and why they mandate smoke containment in specific areas of a structure. Product applications and assemblies designed to meet building code requirements and limit vertical smoke migration via elevator hoistways and lobbies are examined....
Sound abatement products are not just a building owner and occupant preference; minimum sound abatement ratings are required by many local building codes for multi-story residential, commercial, and multi-purpose buildings. Following an introduction to the basics of sound, this course presents a summary of the most common sound control methods, with a focus on the options available for floor underlayment....
This course will discuss best practices to prevent the accumulation of wind driven rain and/or condensation behind exterior adhered masonry systems. We will review proper installation of metal lath, the importance of encapsulation and a wall system that includes a rigid drainage plane. Exterior finishes discussed will include stucco, thin brick, both man made and natural thin stone. When these materials are installed over framed walls moisture management is key to the long-term resiliency of a project. We will also review the expected changes in the 9th Edition of the Florida Building Code pertaining to thin veneer specification and installation....
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements....
View the Rmax - A Division of the Sika Corporation Course Library
Masonry can be used for a variety of different applications. Because of its durable nature, and use of less embodied energy, it is a very environmentally friendly building product. Masonry offers a variety of different facial applications that can greatly enhance the decorative appearance of the building. This program will discuss the different ASTM specification classifications that the architect utilizes regarding masonry. The different types of masonry products are briefly discussed. Also, the IECC energy codes are discussed, as well as the environmental contribution that masonry offers the architect in the specification of building materials, including the prevention of mold in construction projects....
An expansion joint is a structural gap designed to accommodate the movement of a building in a controlled manner, preventing damage to the building’s internal and external finishes. Expansion joints run throughout a building in walls, ceilings, and floors. Expansion joint covers provide a covered transition across an expansion opening and remain unaffected by the relative movement of the two surfaces either side of the joint. This course explains how to determine joint movement requirements and how to size a joint. It also discusses the performance of different expansion joint cover systems and the applicable fire protection and building codes....
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®)....
View the Resilient Floor Covering Institute Course Library
Resilient Floor Covering Institute
This course is part of one or more "Course Collections". Click here to view the details.
This course defines and explains building science behind the code for the four control layers of the building envelope: water, thermal, air and vapor. There will be a detailed overview of air leakage, why it matters in a sustainable envelope and why air barrier continuity is critical to building performance. Participants will be asked to explore typical design principles for addressing the four control layers within the wall assembly. Finally, there will be an in-depth discussion of the critical interfaces, how to detail them and test them to ensure continuity of the control layers for the entire building....
View the DuPont Performance Building Solutions Course Library
Modern roof systems and envelope assemblies (both commercial and residential) may need to deliver a wide range of benefits – from protecting against severe weather to reducing energy waste to improving occupant well-being and comfort. Each component of the building envelope has an important role to play, including the insulation layer. This presentation introduces the key benefits and attributes of polyiso roof insulation products, polyiso continuous insulation products used for above grade wall assemblies and below grade applications, and continuous insulation products used as part of residential envelope assemblies (steep slope roofs, above grade walls, and below grade foundation). Topics covered include: • Designing building and energy code-compliant roof assemblies and commercial and residential envelope assemblies. • Solving performance challenges like ponding water on roofs. • Solving performance challenges like thermal bridging and managing the threat of moisture and air intrusion in commercial and residential building envelope assemblies. • Reducing the environmental impacts of buildings with roof systems and envelope assemblies that contain polyiso insulation products....
View the PIMA - Polyisocyanurate Insulation Manufacturers Association Course Library
PIMA - Polyisocyanurate Insulation Manufacturers Association
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems....
Net zero energy ready buildings are a popular topic in today's world of climate change. This course explores how energy efficiency has expanded toward exterior wall assemblies, where thermal bridging and thermally broken subframing systems are becoming the new norm....
This course will provide an overview of resilient design and discuss how resilient design is not covered by typical building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. There will be examples given in the presentation of resilient design strategies....
Acoustical doors are vital in managing sound transmission in various architectural and industrial settings. This course discusses evaluating, specifying, and integrating acoustical doors into projects that demand effective noise control, speech privacy, and occupant comfort. It also examines how acoustical doors may help meet credit requirements in the LEED® v5 Building Design and Construction rating system and the WELL Building Standard™ version 2. Compliance with fire safety codes and SCIF specifications is also discussed....
