Concrete structures often face some of the most challenging environments, where chemical reactions can rapidly cause erosion and reduced service life. This course explores how acid attack, microbially induced corrosion (MIC), and carbonation compromise the structural integrity of concrete. It covers the origins and damaging effects of these processes, such as cracking, spalling, and corrosion. Learners will discover waterproofing strategies that prevent deterioration through performance-based admixtures that combine antimicrobial and crystalline technologies, along with a visual detection system for on-site verification. Designers will be better equipped to specify protective measures that extend the service life of concrete structures, reduce long-term maintenance, and lower the project’s carbon footprint....
Unwanted sound can become more than a mere annoyance. Excess noise has been found to increase stress and distraction, reduce learning and productivity, and even lead to hypertension and permanent hearing loss. This course presents an overview of how sound is described and measured and describes the many industrial and architectural products available to control noise in virtually any environment....
View the Catalyst Acoustics Group Course Library
This course is part of one or more "Course Collections". Click here to view the details.
Vacuum insulation panels (VIPs) offer higher thermal resistance per unit thickness than traditional insulation materials. This means a building envelope can meet the effective R-values for enclosures required by the energy codes without having to increase the thickness of the walls, roof, or floors. This course discusses how VIPs work, why they are effective, and the impact the properties of the materials used to construct a VIP can have on its performance. VIP installations and the latest developments in VIP technology are reviewed to illustrate the advantages of using VIPs as thermal insulation in the design of energy-efficient buildings....
View the Panasonic Industrial Devices, Building Materials Group Course Library
Designing to accommodate thermal movement is just one of the many critical details for the long-term success of a metal roof installation. This course covers the design and specification considerations and architectural details that impact project requirements, as well as the components and the energy-efficient features of metal roofing assemblies....
Mouldings and trim occupy a small amount of space on a home’s exterior; however, their aesthetic value outweighs their size. Cellular PVC mouldings and trim are durable; stain, rot, and insect resistant; maintenance-free; and recyclable. For properly arranged exterior mouldings and trim, architects and designers need a thorough understanding of the materials and the design rules and functions for each location. This course takes the reader through the layout and installation of exterior mouldings, particularly cellular PVC, and looks at some common mistakes and solutions....
Wall system applications are becoming more and more common in the building envelope industry today. Explore the science behind wall systems and the tangible benefits of incorporating this technology into building structures. There is an emphasis on the differences between air barriers that are impermeable to vapor drive and air barriers that are vapor permeable and which is the best in each climate and wall assembly....
What roof type is ideal for photovoltaic (PV) system mounting? What about “solar zone,” roof orientation, environmental and collateral loads, system sizing, the building enclosure, and life-cycle cost analyses? All these factors affect the sustainability and financial pro forma of the roof and PV system. New technologies can be daunting. When it comes to PV design, small shifts in thinking can bring the things that matter into focus, producing huge savings and production efficiencies for improving the client’s overall ROI. This presentation will review and discuss the concepts of treating the roof and PV system as a single asset with supporting ROIs and IRR. Upon this review, participants will have a better understanding of the numbers regarding the ROI and IRR....
History and development of SBS-modified bitumen waterproofing systems, including addition of FR additives impacting sheet performance in catastrophic fire events allowing protection for building occupants. Modified bitumen sheet anatomy, incorporating discussion of self-adhesive and sanded sheet cold adhesive sheet installations and their impact on building occupants. Methodology of roof system application, including pertinence to environmental and safety impact review modified bitumen membrane surfacing including highly reflective surfacing material options and their impact on building performance and subsequent occupant comfort....
Rough openings are holes in the building enclosure, fitted with fenestrations that leak or will leak. It is critical to properly direct those leaks out of the enclosure. Designs for rough opening specify; tapes, sealants or flashing materials that are water, air, water vapor tight or vapor open. When detailed and installed correctly, most of these materials prevent water from entering into the interstitial wall cavities, allow the “leaks” to drain out of the building enclosure. Tapes, sealants and flashing components can fail over time or are improperly installed allowing water intrusion, trapping the water is vapor impermeable. By utilizing vapor open systems for rough opening materials, water that once trapped by impermeable flashing systems can escape via vapor diffusive drying. This presentation will describe failures, correct installation and testing of rough opening flashing and address current research on vapor open rough opening systems and how permeability enhances rough opening assembly performance....
Roof top paver systems have become an integral part of commercial roofing that not only improves the energy efficiency but also increases the life expectancy of the overall roof system. Changes to codes and standards along with recent storm events have brought wind uplift to the forefront as a vital component to roof top paver systems. The industry has developed various methods for addressing wind uplift, many of which are covered in this course....
This course is designed to provide an understanding the importance of continuous insulation relative to mass wall of Concrete and CMU, and how the continuous insulation can help leverage the mass wall properties to stabilize the building environment. In addition, we will address how specific types of continuous insulation can function as the Air and Water Resistive Barrier System, leading to better indoor environment....
View the Rmax - A Division of the Sika Corporation Course Library
This course explores how the use of color and coil and extrusion coated metal building products can help you make a big visual impact on your next façade design. Learn about the coating process, color theory, the chemistry behind color creation, and the benefits of solar reflective pigments....
A rooftop solar photovoltaic system offers myriad benefits to both building owners and the environment; to maximize the benefits, however, it is important to be aware of the potential causes and effects of problems with rooftop installations. This course presents the issues to consider to prevent damaging the roof, voiding the roofing warranty, and incurring additional costs. Solar system mounting options are explored in terms of how they can help eliminate concerns around rooftop installations....
Protected Roof Membrane Assemblies (PRMA) have unique design requirements since they are loosely laid, held in place with stone ballast, pavers, or vegetative materials. The International Building Code contains prescriptive requirements to guide design and specification of such systems. The standards reviewed in this program provide methods to design wind uplift resistance of ballasted and vegetated roofing systems. The standards are intended to be used as references for designing, specifying, and installing ballasted roofing systems, and are to be used in conjunction with the installation specifications and requirements from the manufacturers of the specific products in the system. For roofs that exceed the boundaries of these standards (meaning designs that are not covered in this document) the authority having jurisdiction is the only source for approval. ASCE 7 gives guidance on how non-standard conditions should be evaluated. See other references, or, utilize professional wind engineering consultants, or, conduct wind tunnel studies in accordance with ASCE 7 for information to determine requirements for designs or systems not covered....
Join us for our webinar series with a focus on retrofit projects. The design challenges facing architects and builders when renovating older buildings are considerable, from increasing energy efficiency to navigating inherited structural and building code changes. Kalwall is a lightweight, rapidly installed and beautiful solution for bringing old buildings into the modern, daylit, era. Learn more about how Kalwall can help you accomplish a retrofit on budget and on schedule....
One of the more complicated issues today in building science is addressing moisture movement, since moisture can penetrate a building in several different ways and result in material degradation, air quality issues, and failure of the building enclosure. This course examines the ways moisture can enter a structure and discusses the role of different moisture control layers that, when correctly placed and installed, can prevent unwanted moisture infiltration....
Discover the art and science behind SBS (Styrene-Butadiene-Styrene) membrane production in this comprehensive course. Investigate the key components that comprise this durable material, including SBS, Asphalt, Filler, and Reinforcement. Through hands-on learning and practical insights, participants will gain an understanding of the SBS membrane manufacturing process from start to finish....
Protected Roof Membrane Assemblies and particularly Vegetative Roof Assemblies place extreme requirements on the components below the surface from waterproofing to insulation and everything in between. Each component must meet specific standards to achieve energy efficiency and durability. This course describes the high-performance attributes of PRMA components and defines the building code/performance standards and best specification practices to meet fire, wind, thermal, and moisture performance....
Today’s buildings continue to push the envelope of architectural design, energy efficiency, construction timelines and cost reductions forcing building materials and application techniques to evolve. The evolution of products and applications to waterproof the entire building envelope (vertical and horizontal) throughout various construction materials has created a blend between established and newly developed waterproofing technologies. These blended technologies have the single purpose of integrating and creating a continuous system protecting the building from moisture and performing harmoniously. This presentation helps identify the challenges and opportunities to build an integrated waterproofing system addressing all six sides of the building envelope. While each type of installation will be reviewed separately, the platform will be set for successful integration at all of the transitions and changes within the building by the proper identification and specification of compatible products and materials....
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed....
View the Morin Corporation Course Library
This course is part of one or more "Course Collections". Click here to view the details.
This course outlines the dangers posed by Mother Nature and the science, codes, testing, and methods in which to build and combat these forces. In addition, this course addresses the value of continuous insulation to improve the conservation of energy in the building. We will also address how proper incorporation of materials, including continuous insulation and air and weather-barrier systems, will improve indoor air quality and contribute to environmental sustainability....
View the Rmax - A Division of the Sika Corporation Course Library
Roofing technologies have come a long way from labor-intensive systems that achieved water tightness through redundancy. Today’s single-ply thermoplastic membrane systems are lightweight, consistently manufactured, and efficient to install. This course focuses on thermoplastic single-plies, particularly those that are PVC based, and explores their benefits and limitations. It also identifies the important factors to consider when selecting a roof system, including fastening techniques, warranties, safety, and sustainability....
This course provides a review of the problems, safety issues, and solutions associated with snow and ice moving on roofs, particularly in heavy snow accumulation areas. It also provides in-depth training on the proper engineering and installation of snow retention systems....
While natural stone veneer has a timeless popularity in commercial and residential applications, its cost, weight, and availability can make it prohibitive for some projects. Natural-looking manufactured stone veneer alleviates those concerns but still requires time and experience in mortared stone installation. This course explores these options and then introduces the latest manufactured stone product, a panelized, mortarless veneer that installs with the ease, speed, and all-weather flexibility of siding. Application examples and case studies present the many options that offer a real stone aesthetic without the time, skill, and constraints required for mortared applications....
Spray polyurethane roofing is a commercial low-slope roofing system in use since the 1970’s with millions of square feet applied across North America. Attributes of this system are comprehensive, from substantial energy efficiency to durability features, as well as a superior sustainability profile compared to other conventional roofing systems. Exploring the challenges with traditional membrane and built-up roofing systems will bring to light the performance improvements that a spray foam roofing system provides. Attendees will learn about the history and developments of coated spray foam roofing systems. They will also learn of the construction detailing and monolithic performance benefits of spray foam roofing, while gaining knowledge of the environmental and sustainability contributions of this advanced roof system....
Displaying 300 - 324 of 526 results.
FIRST PREV [250-274] [275-299] [300-324] [325-349] [350-374] NEXT LAST