This course provides an introduction to code compliance requirements for low-slope roofing systems as it relates to Wind Uplift, Impact Resistance, and Fire Resistance. Participants will explore the relevant provisions of the 2021 International Building Code (IBC), with emphasis on the referenced standards outlined in Chapters 15 and 16. Participants will review real-world documentation used to demonstrate compliance, enhancing their ability to specify and design roofing systems that meet regulatory standards....
Fundamentally, a building envelope functions as an environmental separator, and has specific hygrothermal control requirements. This course examines how insulated metal panels (IMPs) create the perfect envelope solution, incorporating the same control layers as site built wall systems. Discussions include: building envelope design; perfect/universal walls; and the use of IMPs to provide the building envelope’s exterior finish, and the air, vapor, water, and thermal barriers....
In basic roofing design vapor retarders and air barriers play a crucial role in reducing air leakage and enhancing roof system performance. However, their benefits extend beyond simple air sealing. This course explores the impact of new innovative technology: permeable vapor retarders and air barriers on moisture management, energy efficiency, and wind uplift resistance in low-slope roofing assemblies. Attendees will gain insights into moisture infiltration, air movement, and the risks associated with condensation buildup, material degradation, and loss of R-value in the roofing assembly. The presentation will cover strategies for proper design and placement of a permeable vapor retarder to mitigate condensation buildup and premature roof failures. Recent research findings will highlight how advanced moisture control solutions, such as permeable vapor retarders, enhance long-term roof resiliency and durability, lowering total cost of ownership....
This course provides a review of the problems, safety issues, and solutions associated with snow and ice moving on roofs, particularly in heavy snow accumulation areas. It also provides in-depth training on the proper engineering and installation of snow retention systems....
Mineral wool core panels provide an excellent alternative to foam core insulated metal panels and other traditional materials where the wall assembly need to be fire resistive. Ratings of up to three hours can be achieved by this product. These panels also provide all necessary control layers in a single component: air, vapor, water and thermal. Acoustic properties of the product are also evaluated. Product configurations including sizes, profiles and metal facings are studied. Code compliance and generic details are reviewed. Mineral wool core panels and their contribution to LEED credits are also studied....
This course covers the basics of cellular PVC for moulding and trim. It shows the learner the anatomy of window surrounds made of cellular PVC, how to install and maintain the material, and finally architectural moulding and trim mistakes to avoid....
The impacts of noise on occupancy health and wellness must be taken seriously. By understanding the importance of good noise control, learners will be able to understand the link between acoustic control and health, well-being, learning and productivity. This course will describe different scenarios like healthcare facilities, schools and offices. The course will give you an insight into the different sound absorbing materials that can be used to improve room acoustics. In addition, we will discuss best practices using different solutions such as incorporating Melamine Foam as a sound absorbing material in different scenarios...
Incorporating nature into the built environment through biophilic design increases occupant well-being, productivity, and health and is an integral component of an ecologically healthy and sustainable community. Presented here is an overview of biophilic design, its relationship to sustainability, and its positive human, environmental, and economic outcomes. Case studies demonstrate how rooftop deck systems can contribute to biophilic and sustainable design objectives....
This introductory course on spray polyurethane foam (SPF) covers component chemistry, different types of SPF, and the proper use of SPF in construction applications. In addition, the course addresses code compliance related to SPF for residential and commercial construction, as well as safe SPF installation practices. Participants will come away with a strong knowledge of how the proper use and application of spray foam can improve the indoor environment and the durability of the built environment....
Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. When designing exterior wall assemblies, the type and placement of insulation is critical. To address thermal performance, wall systems almost always feature insulation batts — friction fit between framing members. Depending on climate zone and construction type, though, insulation batts alone may not provide enough thermal resistivity. Continuous insulation is increasingly used in conjunction with insulation batts to optimize thermal performance....
This AIA course delves into the transformative power of PMMA (Polymethyl Methacrylate) and PUMA (Polyurethane Methacrylate) technologies within the construction industry. Participants will explore the unique physical properties and exceptional performance benefits these advanced materials offer, particularly in terms of speed of application and durability. The course provides a comprehensive overview of typical installation procedures, focusing on common applications such as vehicular coatings and below-grade waterproofing. Special attention is given to the critical role these technologies play in minimizing downtime for essential facilities, such as hospitals, where maintaining operational entrances and surfaces like ambulance bays and helipads is vital. With zero VOC emissions, PMMA and PUMA technologies also support environmentally safe construction practices....
In the wake of the green movement, combined with rising energy costs, building sustainability has become an important topic. This course examines how foil-faced polyisocyanurate (polyiso) continuous insulation can function as a multiple control layer, providing a building with an air and water-resistive barrier and a thermal control layer. Additionally, this course reviews building codes and standards for meeting the continuous insulation requirements in steel stud building envelope designs, the benefits of using polyiso insulation in wall assemblies, and how polyiso insulation meets NFPA 285 requirements....
View the Rmax - A Division of the Sika Corporation Course Library
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance....
Discover the correct selection, specification, engineering, and design process to create safe and permanent roof attachments for various needs. Learn how to properly identify rooftop thermal cycling and manage the correct installation process. Identify correct installation practices of any rooftop penetration to maintain weathertightness warranties. Learn how to meet local and national building code requirements and other safety specifications for various rooftop accessories. Discover the ease of installing rooftop safety equipment and accessories safely without voiding roof manufacturer warranties on metal roofs....
The use of Adhered Veneer Masonry in commercial and multi-family residential markets has grown rapidly this past decade. However, Codes, installation details, and installer training have come at a slower pace. This program focuses on the architect’s role in designing and detailing code compliant adhered veneer systems....
Wall system applications are becoming more and more common in the building envelope industry today. Explore the science behind wall systems and the tangible benefits of incorporating this technology into building structures. There is an emphasis on the differences between air barriers and vapor barriers and which is the best given climate and wall assembly....
Roof underlayments play a vital role in enhancing roof durability by preventing moisture intrusion and extending the life of the roofing system. This course compares traditional felt roof underlayments with modern synthetic roof underlayments across various parameters and discusses ASTM standards and material testing. The course examines the four critical performance factors that influence product selection and concludes with a checklist of items to address to ensure the appropriate underlayment is specified....
At this time, there are no national or state codes relating to snow retention for roofing applications, even in the heaviest snow load areas. Consequently, it is very important for building professionals to take extra care when designing a snow retention system for installations in snowy environments. This course provides a review of the problems and solutions associated with roofing in cold climates, including a discussion on the proper engineering of snow retention devices. There are many dangers involved if the appropriate considerations are not made while building and maintaining a roof in an alpine region....
This course covers several aspects of the Tesla Ecosystem, Tesla Solar Roof (renewable energy generation), Tesla Powerwall (energy storage & back-up power), and Tesla Wall Connector (electric vehicle charging)....
This presentation reviews the importance of low-slope roofing and the impact roofing has on critical/essential facilities and community resilience....
Invite costumers and guests into brightly lit spaces that encourage them to stay. Whether introducing a skylight to a hotel atrium or providing a whole new dining experience with a Kalwall façade, skyroof®, or canopy, we can help you discover a daylighting solution that keeps customers coming back....
Rough openings will leak - learn how to properly sequence rough opening installation materials and allow the “leaks” to drain out and away from the building structure....
When structural stability and thermal continuity collide, structure has historically taken precedence necessitating tradeoffs such as increased insulation in other areas or acceptance of energy loss and potential moisture damage. The foundation transition from below grade to masonry ledge to masonry veneer wall is one such challenge. What if there was a solution? This presentation explores solutions for perimeter foundation insulation including information needed to specify and install correctly....
This course goes over sustainable roofing considerations. Participants will understand what role the roof system plays in sustainable design, and how conventional roof design impacts sustainability. They will also learn the how insulation type impacts lifecycle, and how to improve design with the ‘Perfect Roof.’ Presentation covers critical concerns of stormwater management, construction requirements, and functionality of space....
View the DuPont Performance Building Solutions Course Library
Commercial roofing systems are quite varied. As such, their performance expectations are varied, and their suitability for different applications vary. Certain types of high performance roofing systems require specific components, and performance standards to achieve energy efficient and durable life cycle performance. This course describes the high performance attributes of extruded polystyrene insulation (XPS) in commercial roofing applications including PRMA (green/vegetated), mechanically attached, architectural metal and recover systems for which XPS is uniquely suited. It defines the building code/performance standards and best specification practices for those systems. Further, it compares various insulation types, how they are manufactured, and how the manufacturing process effects the physical properties and performance of each type of insulation....
Displaying 308 - 332 of 537 results.
FIRST PREV [258-282] [283-307] [308-332] [333-357] [358-382] NEXT LAST